Manual.ly Logo

esotec Tivoli Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: QW-35-FL
page

/ 1

Loading...
1b3905989d5d0a833781e2c7de3ef0986687 page 1
Operating Manual
LED Solar pole lamp “Tivoli”
These instructions relate ONLY to this product and contain important
information for using the product for the first time. Please keep these
instructions for later reference and should always accompany the
product in the event of transference to a new user.
1. Introduction
Dear Costumer,
Thank you for purchasing the solar light.
With this solar light you purchased a product manufactured according to
the current state of technology.
This product fulfils all requirements of the valid European
and national regulations. The conformity was proved. The
relevant declarations and documentation are deposited
with the manufacturer.
To maintain this state and guarantee a safe operation, you as the user will
have to follow this operating manual!
2. Safety Instructions
- In case of damages caused by not following this
operating manual, the warranty rights will expire!
We exclude liability for any consequential
damages!
- We exclude liability for property or personal
damages caused by inappropriate handling
or not following the safety instructions.
- In these cases any guarantee rights will expire.
Due to safety and admission reasons (CE) it is not allowed to arbitrarily
reconstruct and/or change the solar light.
Therefore, please keep to the operating manual.
The accident prevention rules of the association of the industrial trade
cooperative association for electric plants and working material are to be
considered in industrial environments
3. Usage in Accordance with Requirements
The solar light is constructed for the outdoor usage and operation. The integ-
rated accumulator is charged by the solar cell in the upper part of the light. At
darkness, the light is automatically switched on and is switched out at sunrise.
As light source, 1 very strong light emitting diode (LED) are installed. These
LED guarantee a strong luminosity with only low power consumption.
-- However, please note that the duration of illumination may decrease
due to a lack of sunshine as well as in the winter months--
In case of longer periods without sunshine (insolation) the accumulator is
charged only insufficiently and is thus not able to guarantee a permanent
readiness for operation. However, this does not indicate that the solar light is
defect. Please wait for the next sunny days and the light will again be working
accordingly
4. Initiation
1. Please carefully take all parts out of the package.
2. Please carefully stick the ground spike and the tube
together and carefully insert the assembly into the
soil.
Note: Do not use force when assembling the parts.
3. Shift the switch at the bottom of the lamp into the
position “ON” and stick the lamp on the tube.
The solar light is now active.
Note: The duration of illumination is strongly dependent of the intensity
and duration of sunshine during the day. During the winter months, the
duration of illumination will generally be shorter. In case the light should not
give light on the first evening, please wait for a sunny day.
5. Exchange of the rechargeable batteries
Rechargeable batteries of solar lights have to be exchanged every 2 years
on average. Please only insert new and identical in construction 1.2 V/
600 mAh micro (AAA) batteries. I case you should not be able to get this
capacity from your (local) retailer you may also use batteries with a higher
capacity.
1. Hold the upper part rmly and untwist the bottom part of the lamp head
clockwise (illustration 1), take the components apart.
2. Open the battery compartment (illustration 2), remove the drained
batteries from the battery compartment and insert the new batteries
with correct polarity (illustration 3). It is recommended to charge the
new batteries in a battery charger before inserting those batteries.
3. Now reassemble and close the lamp in reverse order.
Note: Batteries have to be disposed of in an environmentally sound
way and do not belong into the household waste. Your retailer is bound
by law to take back the old batteries.
6. Malfunctions
-Lamp is not automatically switched on at darkness
- An outside light source (e.g. streetlight) simulates daylight and prevents the lamp
from switching on. Place the lamp at a darker location.
- Lamp is not switched on at darkness or only for a short period of time.
- Is the lamp connected?
- Accumulator weak or defective. Exchange of the accumulators.
7. Technical data
• Solar module: 0,5 W, crystalline silicon
• Degree of protection: IP 44
• Protection class: III
• Illuminant: 1 warmwhite light emitting diode (LED)
• Luminous flux LED: 15 lm
• Light color LED: 2900 K
• Accumulator set: 2 x NiMh 1,2 V/600 mAh (Micro , AAA-size)
• Lighting time: Max. 8 hours with fully charged accumulators
Rechargeable battery notes
- Rechargeable batteries should not be played with by children. Never leave rechar-
geable batteries lying around; they could be swallowed by children or pets.
- Rechargeable batteries must never be short-circuited, disassembled or thrown into
fire. This leads to a danger of explosion!
- Leaking or damaged rechargeable batteries can cause chemical burns when they
come into contact with skin. For this reason, please make use of suitable protective
gloves.
- Rechargeable batteries should only be replaced by structurally identical rechar-
geable batteries from the same manufacturer. Normal batteries must not be used
since these are not rechargeable.
- Make sure the rechargeable batteries are inserted with the correct polarity.
- For long periods of time of non-use (for example, storage), remove the inserted
rechargeable batteries to avoid damages via the leaking rechargeable batteries.
Manufacturer/Importer:
esotec GmbH - Gewerbegebiet Weberschlag 9 - D-92729 Weiherhammer
Tel.-Nr: +49 9605-92206-0 - Fax.-Nr: +49 9605-92206-10 - Internet: www.esotec.de
Disposal:
Dear customer,
please cooperate in avoiding waste. When you intend to dispose of
the product in future, please consider that it contains valuable raw
materials suited for recycling.
Therefore, do not dispose it of with domestic waste but bring it to
a collection point for the recycling of waste electrical and electronic
equipment.
Thank you very much for your cooperation!
Copyright, esotec GmbH
!
GB
Battery Recycling:
- Used batteries or accumulators must be disposed in the dome-
stic waste.
- The consumer is legally obliged to bring back old accumulators
upon usage, e.g. to public waste collecting locations or to the
place (shops, etc.) where those batteries are sold.
- Batteries that contain harmful substances are marked with the
“strike through dustbin” and one of the chemical symbols.
NiMh
Customer support:
If you have problems or questions regarding this product, simply contact us!
Monday to Friday 9 am to 12 noon and 1 pm to 4 pm.
By phone: +49 9605-92206-0
By e-mail for ordering spare parts: [email protected]
By e-mail for questions about the product: [email protected]
Product: Manufacturer Item No.: 102062
1.
2.
3.
switch

Chat with your esotec Tivoli manual using AI

Get instant AI answers from your esotec Tivoli manual

Ask anything about the esotec Tivoli. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Tivoli?

Yes No

Frequently Asked Questions

A

With fully charged accumulators, the lamp provides up to 8 hours of illumination. However, this duration depends heavily on the amount of sunlight received during the day.

Is this answer helpful?

A

The lamp requires two NiMh rechargeable batteries, specifically 1.2V/600mAh micro (AAA) size. Higher capacity batteries can be used if identical ones are unavailable.

Is this answer helpful?

A

This often happens if the lamp is exposed to other light sources like streetlights which trick the sensor into thinking it is daytime. Move the lamp to a darker location.

Is this answer helpful?

A

Yes, the Esotec Tivoli has an IP44 protection rating, making it resistant to splashing water and suitable for outdoor use in rain.

Is this answer helpful?

A

Connect the spike to the tube, push the assembly into the soil, and switch the bottom switch to ON. No tools or electricity are needed for setup.

Is this answer helpful?

A

No, you must use rechargeable NiMh batteries. Standard non-rechargeable batteries will not work with this solar charging system.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Automatic operation via integrated light sensor
  • Easy installation without electrical wiring
  • Eco-friendly solar power source
  • Durable copper finish suitable for outdoors
  • Low energy consumption with long battery life
VS

Disadvantages

  • Illumination time decreases significantly in winter
  • Requires regular battery replacement every two years
  • May fail to activate if exposed to streetlights at night
  • Limited brightness compared to wired mains lights
  • Sensitive to lack of direct sunshine for charging
M: QW-35-FL

Product Specification

Type

Floor lamp

Built-in LEDs

Yes

Socket

No

Light source

LED (integrated light source), warm white (2800K), 15lm

Total luminous flux

15lm

Material

Plastic

Color

Bronze

Design

Square

Protection class

IP44

Insulation class

Class 3

Dimensions

6.7x6.7x26.4in (WxDxH)

M: QW-35-FL

Product Description

Esotec Tivoli Solar Stehleuchte kupfer - Elegant Outdoor Lighting

Transform your garden or pathway with the Esotec Tivoli Solar Stehleuchte in a striking copper finish. This solar-powered pole lamp combines modern technology with timeless aesthetics to provide reliable illumination without the need for electrical wiring. Designed specifically for outdoor use, the Tivoli features an integrated solar cell that charges the internal accumulator during the day, ensuring automatic operation at dusk.

The lamp utilizes a high-efficiency warm white LED that delivers a luminous flux of 15 lumens, creating a cozy and inviting atmosphere. With a maximum lighting time of eight hours on a full charge, this device is perfect for highlighting flower beds, walkways, or patio entrances. The copper-colored housing not only adds a touch of elegance but also withstands various weather conditions thanks to its IP44 protection rating.

Installation is straightforward and requires no tools beyond basic assembly. Simply connect the ground spike to the tube, insert the unit into the soil, and switch it to the ON position. The intelligent light sensor ensures the lamp turns on automatically when darkness falls and switches off at sunrise. While the duration of illumination may vary depending on sunlight exposure, especially during winter months, the system remains robust and easy to maintain.

Battery replacement is simple when needed, typically every two years. Users should replace the included NiMh batteries with identical 1.2V/600mAh micro batteries to ensure optimal performance. Always dispose of old batteries responsibly at designated collection points to protect the environment. The Esotec Tivoli stands as a practical, eco-friendly solution for enhancing outdoor spaces with minimal effort.

Important Notes

  • Ensure the lamp receives direct sunlight for best charging results.
  • Do not expose the lamp to artificial light sources at night to prevent malfunction.
  • Remove batteries if storing the lamp for extended periods.
M: QW-35-FL

© Copyright 2026 Manual.ly