Manual.ly Logo

esotec Rattan Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: QW-35-FL
page

/ 1

Loading...
11f76f9f0e5b7f57ebaf34037b46e93996c5 page 1
Operating instructions
The ‘Rattan’ Solar-powered Lamp
These instructions relate ONLY to this product and contain important infor-
mation for using the product for the first time. Please keep these instructions
for later reference and should always accompany the product in the event of
transference to a new user.
1. Introduction
Dear Costumer,
Thank you for purchasing the solar light.
With this solar light you purchased a product manufactured according to the current
state of technology.
This product fulfils all requirements of the valid European and
national regulations. The conformity was proved. The relevant
declarations and documentation are deposited with the manu-
facturer.
To maintain this state and guarantee a safe operation, you as the user will have to
follow this operating manual!
2. Safety Instructions
- In case of damages caused by not following this
operating manual, the warranty rights will expire!
We exclude liability for any consequential damages!
- We exclude liability for property or personal
damages caused by inappropriate handling
or not following the safety instructions.
- In these cases any guarantee rights will expire.
Due to safety and admission reasons (CE) it is not allowed to arbitrarily reconstruct
and/or change the solar light.
Therefore, please keep to the operating manual. The accident prevention rules of
the association of the industrial trade cooperative association for electric plants and
working material are to be considered in industrial environments
3. Usage in Accordance with Requirements
This solar-powered lamp is designed for outdoor use. The built in rechargeable
battery is charged by the solar cell in the upper portion of the lamp. The lamp swit-
ches itself on automatically when it is getting dark and switches itself off when it is
beginning to get light in the morning. A high performance LED (light emitting diode)
is used as the light source. This LED guarantees a good light intensity while using
a small current.
-- Please note that the length of time that light is emitted is affected during the
winter months and when there is little sunlight falling upon the solar module.--
Note: During prolonged periods without any incident solar radiation, the rechargeable
battery will be insufficiently charged to ensure that the lamp is always ready for use.
This does not however mean that the solar lamp is defective. Wait for the next
sunny days and the lamp will again work correspondingly well. Alternatively you
can recharge the battery in the intervening time by using a commercially available
charger.
4. Initiation
1. Carefully remove the lamp from the packa-
ging.
2. Remove the protective film from the solar
module.
3. Turn the solar module anticlockwise „open“
and remove the upper part (Figs 1 and 2).
4. Pull the strips out from the lower part (Figure
3).
5. Place the top part back onto the lamp and
turnitinaclockwisedirection„close“untilitis
firmly in position.
6. Mount the solar lamp with the earth spike on
the ground or you can fix it with screws with
the ground plate (see picture below).
Note: the duration of the light given out is highly
dependent on both the intensity and the length
of sunlight experienced during the day. On days
when there is little sun
then the light can nor-
mally be expected to be
given out for a shorter
period of time. Should
the lamp still not light
on the first evening, then
wait until a sunny day or
else charge the rechar-
geable battery using a
commercially available
charger.
5. Changing the rechargeable batterie
The rechargeable batteries present in solar
lamps must be changed after an average period
of every 2 years. Please only insert identical
rechargeable batteries which have the same
voltage and the same capacity. Should these
rechargeable batteries not be commercially
available, then you can also use rechargeable
batteries which have a higher capacity.
1. Turnthe solar module anticlockwise „open“
(Figure 4) and remove the upper part.
2. Open the battery cover and remove it (Figure
5).
3. Take the used rechargeable batteries from
the battery holder and insert a new rechar-
geable battery into the battery holder making
sure the poles of the battery are connected
the right way round (Figure 6). It is advisable
to charge the new batteries in a battery char-
ger before inserting them into the lamp.
4. Next reassemble the lamp in the reverse
order.
Note: used batteries must be disposed of in an
environmentally friendly manner and should not
be placed in your household waste. Your dealer
is obliged by law to take back the old recharge-
able batteries.
6. Malfunctions
-Lamp is not automatically switched on at darkness
- An outside light source (e.g. streetlight) simulates daylight and prevents
the lamp from switching on. Place the lamp at a darker location.
- Lamp is not switched on at darkness or only for a short period of time.
- Is the lamp connected? (see poimt 4.4)
- Accumulator weak or defective. Exchange of the accumulators.
7. Technical details
Solar module: crystalline silicium 140 mW
Means of illumination: 1 warm white LED
Lighting color: 3500 K
Operating voltage: 1.2 V
Rechargeable battery: NiMh 1.2 V/500 mAh (Mignon, AA-size)
Period of illumination: maximum 8 hours on a fully charged battery
Rechargeable battery notes
- Rechargeable batteries should not be played with by children. Never leave rechar-
geable batteries lying around; they could be swallowed by children or pets.
- Rechargeable batteries must never be short-circuited, disassembled or thrown into
fire. This leads to a danger of explosion!
- Leaking or damaged rechargeable batteries can cause chemical burns when they
come into contact with skin. For this reason, please make use of suitable protective
gloves.
- Rechargeable batteries should only be replaced by structurally identical rechar-
geable batteries from the same manufacturer. Normal batteries must not be used
since these are not rechargeable.
- Make sure the rechargeable batteries are inserted with the correct polarity.
- For long periods of time of non-use (for example, storage), remove the inserted
rechargeable batteries to avoid damages via the leaking rechargeable batteries.
Manufacturer/Importer:
esotec GmbH - Gewerbegebiet Weberschlag 9 - D-92729 Weiherhammer
Tel.-Nr: +49 9605-92206-0 - Fax.-Nr: +49 9605-92206-10 - Internet: www.esotec.de
Disposal:
Dear customer,
please cooperate in avoiding waste. When you intend to dispose of
the product in future, please consider that it contains valuable raw
materials suited for recycling.
Therefore, do not dispose it of with domestic waste but bring it to
a collection point for the recycling of waste electrical and electronic
equipment.
Thank you very much for your cooperation!
Copyright, esotec GmbH
!
GB
Battery Recycling:
- Used batteries or accumulators must be disposed in the
domestic waste.
- The consumer is legally obliged to bring back old accumu-
lators upon usage, e.g. to public waste collecting locations
or to the place (shops, etc.) where those batteries are
sold.
- Batteries that contain harmful substances are marked with
the“strikethroughdustbin”andoneofthechemicalsym-
bols.
NiMh
Customer support:
If you have problems or questions regarding this product, simply contact us!
Monday to Friday 9 am to 12 noon and 1 pm to 4 pm.
By phone: +49 9605-92206-0
By e-mail for ordering spare parts: [email protected]
By e-mail for questions about the product: [email protected]
Product: Manufacturer Item No.: 102073
1
2
3
4
5
6

Chat with your esotec Rattan manual using AI

Get instant AI answers from your esotec Rattan manual

Ask anything about the esotec Rattan. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Rattan?

Yes No

Frequently Asked Questions

A

On a fully charged battery, the lamp provides a maximum of eight hours of illumination. However, this duration may vary depending on the amount of sunlight received during the day.

Is this answer helpful?

A

The lamp uses NiMh rechargeable batteries with a specification of 1.2 volts and 500 mAh capacity. They are Mignon or AA size and should be replaced every two years.

Is this answer helpful?

A

No, this solar-powered lamp is designed specifically for outdoor use. It relies on direct sunlight to charge the internal battery and may not function correctly in indoor environments.

Is this answer helpful?

A

The lamp might be exposed to stray light from streetlamps or windows which tricks the sensor. Move it to a darker spot. Alternatively, the battery might be weak and needs replacement or recharging.

Is this answer helpful?

A

Turn the solar module anticlockwise to open the top, remove the battery cover, and swap the old batteries for new ones ensuring correct polarity. Wear gloves if handling damaged batteries.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Eco-friendly solar operation eliminates electricity costs
  • Automatic sensor turns light on at dusk and off at dawn
  • Warm white LED creates a cozy garden atmosphere
  • Easy installation with included earth spike or screw options
  • Durable rattan design fits various outdoor decor styles
VS

Disadvantages

  • Light duration decreases significantly during winter or cloudy days
  • Requires battery replacement every two years
  • May fail to switch on if placed near other artificial light sources
  • Solar charging depends entirely on weather conditions
  • Batteries must be disposed of at special recycling centers
M: QW-35-FL

Product Specification

Type

Path light

Fixed LEDs

yes

Socket

no

Light source

LED (fixed light source), neutral white (3500K)

Material

Plastic

Color

Brown

Design

Square

Features

Battery powered, Solar powered, Integrated light sensor

Protection class

IP34

Class of protection

3

Dimensions

19.69x3.54x3.54 in (LxWxH)

M: QW-35-FL

Product Description

Illuminate Your Garden with the esotec Rattan Solar Path Light

Transform your outdoor space into a warm and inviting sanctuary using the esotec Rattan Solar Path Light. This elegant fixture combines natural aesthetics with modern solar technology to provide reliable illumination for your walkways, gardens, and patios. Designed with a sophisticated rattan finish, it blends seamlessly into various landscape styles while offering a sustainable lighting solution that requires no external wiring.

The lamp features a high-performance LED that emits a warm white glow at 3500 Kelvin, creating a cozy atmosphere without consuming excessive power. Powered by a built-in crystalline silicon solar module, the unit charges automatically during the day and switches on as dusk falls. On a fully charged battery, you can enjoy up to eight hours of continuous light. The device includes an automatic sensor that ensures it operates efficiently, turning off at dawn to conserve energy for the next night.

Installation is straightforward and user-friendly. Simply remove the protective film from the solar panel, detach the top section to access the internal components if needed, and mount the unit using the included earth spike or ground plate screws. It is important to place the lamp in a location that receives ample sunlight to ensure optimal charging, especially during winter months when daylight hours are shorter. If the lamp does not illuminate immediately, wait for a sunny day or use a standard charger to boost the NiMh battery capacity.

Maintenance is minimal but necessary for longevity. The rechargeable batteries should be replaced approximately every two years with identical NiMh AA-size units. Always dispose of old batteries responsibly at designated recycling points rather than in household trash. By following these simple guidelines, the esotec Rattan Solar Path Light remains a durable and eco-friendly choice for homeowners seeking stylish outdoor lighting.

Important Notes

  • Ensure the solar panel faces direct sunlight for best performance.
  • Replace batteries with the same voltage and capacity specifications.
  • Do not attempt to modify the internal structure of the lamp.
  • Remove batteries during long-term storage to prevent leakage.
  • Keep batteries away from children and pets to avoid ingestion hazards.
M: QW-35-FL

© Copyright 2026 Manual.ly