Manual.ly Logo

esotec Flower Light Duo Color Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: QW-35-FL
page

/ 1

Loading...
37f6ad32be5d8627e79ccb1140de41a5e261 page 1
Operating Manual
Solar Light “Flower Light”
DUO COLOR
These instructions relate ONLY to this product and contain important
information for using the product for the first time. Please keep these
instructions for later reference and should always accompany the
product in the event of transference to a new user.
1. Introduction
Dear Costumer,
Thank you for purchasing the solar light.
With this solar light you purchased a product manufactured according to
the current state of technology.
This product fulfils all requirements of the valid European
and national regulations. The conformity was proved. The
relevant declarations and documentation are deposited with
the manufacturer.
To maintain this state and guarantee a safe operation, you as the user will
have to follow this operating manual!
2. Safety Instructions
- In case of damages caused by not following this
operating manual, the warranty rights will expire!
We exclude liability for any consequential damages!
- We exclude liability for property or personal
damages caused by inappropriate handling or not
following the safety instructions.
- In these cases any guarantee rights will expire.
Due to safety and admission reasons (CE) it is not allowed to arbitrarily
reconstruct and/or change the solar light.
Therefore, please keep to the operating manual.
The accident prevention rules of the association of the industrial trade
cooperative association for electric plants and working material are to be
considered in industrial environments
3. Usage in Accordance with Requirements
The solar light is constructed for the outdoor usage and operation. The
integrated accumulator is charged by the solar cell in the upper part of the
light. At darkness, the light is automatically switched on and is switched
out at sunrise. As light source, 2 very strong light emitting diodes (LED) are
installed. These LED´s guarantee a strong luminosity with only low power
consumption. The lighting color can be selected with a switch between
cold white and warm white.
-- However, please note that the duration of illumination may decrea-
se due to a lack of sunshine as well as in the winter months--
In case of longer periods without sunshine (insolation) the accumulator is
charged only insufficiently and is thus not able to guarantee a permanent
readiness for operation. However, this does not indicate that the solar light
is defect. Please wait for the next sunny days and the light will again be
working accordingly
4. Start-up
1. Please carefully take all parts out of the package.
2. Carefully connect the ground spike with the bottom from the solar lamp
and insert it into the soil.
Note: Please do not apply any force.
3. Unscrew the lamp head from the luminary anticlockwise (pic. 1).
4. Remove the strip from the battery case (pic. 2). With the switch you can
select the lighting color between cold white and warm white (pic. 3).
5. Now screw the lamp head back onto the luminary clockwise.
The solar light is now activated.
Note: The duration of illumination is strongly dependent on the intensity
and duration of sunshine during the day. During the winter months the
duration of illumination will generally be shorter. If the lamp should not
irradiate on the first evening, please wait for a sunny day.
5. Exchange of the rechargeable battery
Rechargeable batteries of solar lights have to be exchanged every 2 years on
average. Please only insert a new and identical in construction 1.2 V/ 900 mAh
micro (AAA) battery. I case you should not be able to get this capacity from your
(local) retailer you may also use batteries with a higher capacity.
1. Unscrew the lamp head from the luminary anti clockwise (pic. 4).
3. Remove the battery from the battery compartment by means of a screwdriver
(pic. 5).
4. Insert a new battery with correct polarity into the battery compartment. It
is recommended to charge the new battery in a battery charger before
inserting those battery.
5. Now reassemble and close the lamp in reverse order.
Note: Batteries have to be disposed of in an environmentally sound way
and do not belong into the household waste. Your retailer is bound by law to
take back the old batteries.
6. Malfunctions
-Lamp is not automatically switched on at darkness
- An outside light source (e.g. streetlight) simulates daylight and prevents the lamp
from switching on. Place the lamp at a darker location.
- Lamp is not switched on at darkness or only for a short period of time.
- Is the lamp connected?
- Accumulator weak or defective. Exchange of the accumulators.
7. Technical Data
• Solar module: 0,3 Wp crystalline Silicium
• Lighting color: 6500 K (cold white) or 2800 K (warm white)
• Light intensity: 15 lm / 12 lm
• Lightemittingdiode: 2„Nichia“lightemittingdiodes(LED)
• Duration of illumination: max. 8 hours in case of fully charged set
of accumulators
• Degree of protection: IP 44
• Protection class: III
• Setofaccumulators: 1xNiMh1.2V/900mAh(AAAsize)
Rechargeable battery notes
- Rechargeablebatteriesshouldnotbeplayedwithbychildren.Neverleaverechar-
geable batteries lying around; they could be swallowed by children or pets.
- Rechargeable batteries must never be short-circuited, disassembled or thrown into
fire. This leads to a danger of explosion!
- Leaking or damaged rechargeable batteries can cause chemical burns when they
come into contact with skin. For this reason, please make use of suitable protective
gloves.
- Rechargeable batteries should only be replaced by structurally identical rechar-
geablebatteriesfromthesamemanufacturer.Normalbatteriesmustnotbeused
since these are not rechargeable.
- Makesuretherechargeablebatteriesareinsertedwiththecorrectpolarity.
- For long periods of time of non-use (for example, storage), remove the inserted
rechargeable batteries to avoid damages via the leaking rechargeable batteries.
Manufacturer/Importer:
esotecGmbH,Weberschlag9,D-92729Weiherhammer
Tel.-Nr:+499605-92206-0Fax.-Nr:+499605-92206-10
e-mail: [email protected] Internet: www.esotec.de
Mnufacturer item-Nr: 102604
Disposal:
Dear customer,
please cooperate in avoiding waste. When you intend to dispose of
the product in future, please consider that it contains valuable raw
materials suited for recycling.
Therefore, do not dispose it of with domestic waste but bring it to
a collection point for the recycling of waste electrical and electronic
equipment.
Thank you very much for your cooperation!
Copyright, esotec GmbH
!
Battery Recycling:
- Used batteries or accumulators must be disposed in the dome-
stic waste.
- The consumer is legally obliged to bring back old accumula-
tors upon usage, e.g. to public waste collecting locations or to
the place (shops, etc.) where those batteries are sold.
- Batteries that contain harmful substances are marked with the
“strikethroughdustbin”andoneofthechemicalsymbols.
NiMh
GB
1.
2.
3.
4.
5.

Chat with your esotec Flower Light Duo Color manual using AI

Get instant AI answers from your esotec Flower Light Duo Color manual

Ask anything about the esotec Flower Light Duo Color. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Flower Light Duo Color?

Yes No

Frequently Asked Questions

A

Unscrew the lamp head from the base to access the internal switch. Toggle the switch to select between cold white (6500K) and warm white (2800K). Reassemble the unit carefully after making your selection.

Is this answer helpful?

A

It uses one AAA size NiMh rechargeable battery with a capacity of 1.2V and 900mAh. You must replace it with an identical type or higher capacity, never using standard non-rechargeable batteries.

Is this answer helpful?

A

Check if the solar panel is receiving enough sunlight. Also ensure there are no external light sources like streetlamps confusing the sensor. If the battery is old, it may need replacement.

Is this answer helpful?

A

Yes, the unit has an IP44 protection rating, meaning it is protected against water splashes from any direction and solid objects larger than 1mm, making it safe for outdoor garden use.

Is this answer helpful?

A

With a fully charged battery, the light can operate for a maximum of eight hours. Duration will vary based on the amount of sunlight received during the day and the ambient temperature.

Is this answer helpful?

A

While possible, placing the light in a shady area will result in insufficient charging. For best results, position the solar panel where it receives direct sunlight for several hours daily.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Dual color temperature selection allows customization of garden ambiance
  • Automatic operation via solar sensor eliminates manual switching needs
  • IP44 rating ensures durability against rain and weather elements
  • Easy installation without requiring electrical wiring or professional help
  • Energy-efficient LED technology reduces electricity costs significantly
VS

Disadvantages

  • Illumination duration decreases during winter months or cloudy weather
  • Battery replacement required approximately every two years for best performance
  • Sensor may fail to activate if exposed to nearby artificial street lights
  • Limited brightness output compared to mains-powered garden fixtures
  • Solar charging efficiency drops significantly if shaded by trees or buildings
M: QW-35-FL

Product Specification

Type

Path light

Fixed LEDs

yes

Socket

no

Light source

LED (fixed light source), warm white-daylight white (2800-6500K), dimmable, 12lm

Total luminous flux

12lm

Color

silver

Design

round

Features

White tone control, battery operation, solar operation, integrated light sensor

Protection class

IP44

Safety class

3

Dimensions

5.1x16.1in (DxH)

M: QW-35-FL

Product Description

Illuminate Your Garden with the esotec Flower Light Duo Color Solar Path Light

Transform your outdoor space into a serene sanctuary using the esotec Flower Light Duo Color Solar Path Light. This innovative solar lamp combines aesthetic appeal with practical functionality, designed specifically to enhance garden pathways and flower beds without the need for complex wiring. The unique "Flower" design adds a decorative touch while providing essential illumination after sunset.

The heart of this lighting solution lies in its versatile color options. Users can easily switch between cold white light at 6500 K and warm white light at 2800 K using a dedicated switch on the unit. This flexibility allows you to match the lighting ambiance to your personal preference or the specific mood of your garden. Whether you desire the crisp clarity of daylight or the cozy glow of evening warmth, this product delivers both.

Powered by an integrated solar module made of crystalline silicon, the light charges during the day and operates automatically at night. It features two high-quality Nichia LEDs that ensure strong luminosity with minimal power consumption. Once fully charged, the unit can provide up to eight hours of continuous illumination. However, users should note that performance depends heavily on sunlight exposure; winter months or cloudy periods may reduce operating time slightly.

Installation is straightforward and requires no tools other than basic handling. Simply insert the ground spike into the soil and place the lamp head onto the base. The device includes a rechargeable NiMh battery which should be replaced every two years to maintain optimal performance. Safety is paramount, as indicated by its IP44 protection rating, making it resistant to water splashes and suitable for all-weather outdoor conditions.

Important Notes

Always dispose of used batteries at designated recycling points rather than household waste. Ensure the solar panel remains unobstructed by foliage to maximize charging efficiency. If the light does not turn on initially, allow it to charge under direct sunlight for a full day before expecting operation.

M: QW-35-FL

© Copyright 2026 Manual.ly