Manual.ly Logo

esotec Asinar Plus Manual

4.5 · 4 Ratings

PDF manual · 1 Pages

English

M: QW-35-FL
page

/ 1

Loading...
01d1f88c3200e8fa2bcf03c9352f7475cb01 page 1
5. Exchange of the Batteries
The batteries have an average service life of approx. 2
years. After this time, the duration of illumination and the
operational readiness of the lamp will decline. We therefore
recommend an exchange of the batteries every 2 years.
Note: 3 NiMh 1.2 V/ 900 mAh Mignon batteries are used
in this lamp. When exchanging those batteries, you may
also use batteries with a higher capacity (e.g. 1300 mA).
Those batteries are available from your dealer or the
manufacturer. Please make sure that only identical in
construction batteries with identical capacity are used. It is
recommended to charge the new batteries in a charger prior
to their use.
When exchanging the batteries, please proceed as
follows:
1. Remove the lamp from the stainless steel pipe and
unscrew the luminary from the upper part clockwise
(gure 1).
2. Rotate the reector anticlockwise and remove it (gure
2 + 3).
3. Carefully unlock the battery compartment (gures 4
and 5) and open it. Take the batteries out of the holder
and replace them by new freshly charged identical in
construction batteries.
Note: Please put in the batteries with correct polarity.
4. Now reassemble the lamp in reverse order.
Note:
Batteries have to be disposed of in an environmentally
sound way and do not belong into the household waste.
6. Malfunctions
Lamp is not activated at darkness
- A source of extraneous light (e.g. street lamp) simulates
daylight on the solar module and prevents the activation. Place the lamp at a
darker place!
At darkness, the lamp is not activated at all or only for a short time.
- Is the lamp switched on?
-Battery weak or defective? Exchange the batteries!
Lamp shines bright without any persons moving within the detection range.
- Stray cats or other animals activate the light.
- Are bushes or trees heavily moving within the detection range?
- Wind with greatly varying temperatures may activate the motion sensor?
7. Technical Data
- Solar module: crystalline silicon 1.2 Wp
- Illuminant: 3 white „Nichia“ light emitting diode´s (LED)
- Luminous color: 6500 K (cold white)
- Luminosity: 2,2 lm/ 100 lm (with PIR)
- Protection class: IP 44
- Protection class: III
- Battery: 3 x NiMh 1.2 V/900 mAh (Mignon, AA)
- Duration of illumination: max. 12 hours with fully charged battery pack
Depending on the switching frequency
of the motion sensor/switch
- Coverage motion detector: 120°/ 6 m
- Operating temperature range: -20°C to + 40°C
Rechargeable battery notes
- Rechargeable batteries should not be played with by children. Never leave rechar-
geable batteries lying around; they could be swallowed by children or pets.
- Rechargeable batteries must never be short-circuited, disassembled or thrown into
fire. This leads to a danger of explosion!
- Leaking or damaged rechargeable batteries can cause chemical burns when they
come into contact with skin. For this reason, please make use of suitable protective
gloves.
- Rechargeable batteries should only be replaced by structurally identical rechar-
geable batteries from the same manufacturer. Normal batteries must not be used
since these are not rechargeable.
- Make sure the rechargeable batteries are inserted with the correct polarity.
- For long periods of time of non-use (for example, storage), remove the inserted
rechargeable batteries to avoid damages via the leaking rechargeable batteries.
Disposal:
Dear customer,
please cooperate in avoiding waste. When you intend to dispose of the
product in future, please consider that it contains valuable raw materi-
als suited for recycling.
Therefore, do not dispose it of with domestic waste but bring it to a col-
lection point for the recycling of waste electrical and electronic equip-
ment. Thank you very much for your cooperation!
Copyright, esotec GmbH!
GB
Using Instructions
Solar light „Asinara PIR-plus“
These instructions relate ONLY to this product and contain important information for
using the product for the first time. Please keep these instructions for later reference
and should always accompany the product in the event of transference to a new user.
1. Introduction
Dear Costumer,
Thank you for purchasing the solar light. With this solar light you purchased a product
manufactured according to the current state of technology.
This product fulfils all requirements of the valid European and
national regulations. The conformity was proved. The relevant
declarations and documentation are deposited with the manu-
facturer.
To maintain this state and guarantee a safe operation, you as the user will have to
follow this operating manual!
2. Safety Instructions
- In case of damages caused by not
following this operating manual, the
warranty rights will expire! We exclude
liability for any consequential damages!
- We exclude liability for property or
personal damages caused by inappropriate
handling or not following the safety instructions.
- In these cases any guarantee rights will expire.
Due to safety and admission reasons (CE) it is not allowed to arbitrarily reconstruct
and/or change the solar light.
Therefore, please keep to the operating manual.
The accident prevention rules of the association of the industrial trade cooperative
association for electric plants and working material are to be considered in industrial
environments.
3. Intended Use and Function
The solar module installed in the upper part converts sunlight into electrical current.
The installed batteries are charged with this produced energy.
At darkness, the installed high-quality „Nichia“ LED´s shines with weak luminosity.
When a change of heat (motion) is detected, the LED´s will shine a lot brighter for
approx. one minute.
The lamp is automatically switched off when it is bright or if the battery is discharged.
The solar lamp is suitable for year-round outdoor use. The duration of illumination
during the night strongly depends on the solar radiation and the angle of incidence
onto the solar cell during the day. Solar lamps shall always be positioned at a shadow-
free and sunny place. An operation at a place facing north or in the shadow of trees
or bushes is not recommendable.
4. Start-up
1. Please carefully take out all parts out of the
package.
2. Unscrew the luminary from the upper part
(gure 1) and switch on the lamp via the slide
switch (gure 2) (ON). Screw the luminary
back onto the upper part.
3. Turn off the two nuts from the bracket and
screw the bracket to the back of a sunny wall
in max. 1.8 m height. Screw the cover back
on the holder and put the light on the tube on.
Pay attention that the motion switch facing
forward!
The solar lamp is now activated.
Note: The lamp is equipped with a motion sensor/
switch. At darkness, a weaker light is shining and
the lamp serves as an orientation light in energy
saving mode.
If the installed motion sensor now detects a change of heat within its range (120°), the
light intensity will automatically be increased signicantly. The duration of illumination
amounts to approx. 1 minute.
Thus, the lamp is ideal for paths or as staircase lighting.
1
2
Customer support:
If you have problems or questions regarding this product, simply contact us!
Monday to Friday 9 am to 12 noon and 1 pm to 4 pm.
By phone: +49 9605-92206-0
By e-mail for ordering spare parts: [email protected]
By e-mail for questions about the product: [email protected]
Product: Manufacturer Item No.: 102098
!
Battery take-back
- Batteries must not be discarded into domestic waste.
- The consumer is legally required to return batteries after use,
e.g. to public collecting centers or to battery distributors.
- Contaminant-containing batteries are labeled with the sign
“crossed-out trashcan“ and one of the chemical symbols. Used
batteries should be disposed environmentally friendly and
should not be discarded into domestic waste. Your dealer is
legally required to take back old batteries.
NiMh
press
lift
1
2
3
4
5

Chat with your esotec Asinar Plus manual using AI

Get instant AI answers from your esotec Asinar Plus manual

Ask anything about the esotec Asinar Plus. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Asinar Plus?

Yes No
0
User Pic

Andy Turner

5 months ago

Does this solar light work reliably during winter months with limited sunlight?

0
User Pic

Manual.ly

5 months ago

The light is designed to be bright enough for path visibility. However, users have noted that in winter (November to February), the non-dimmable setting can drain batteries due to insufficient charging from low daylight. While standard AA batteries can be recharged externally, the solar function may not fully sustain operation without direct sun exposure during these months.

M: QW-35-FL
M: QW-35-FL
0
User Pic

ferne13

6 months ago

Is the brightness adjustable or does it have a dim mode?

M: QW-35-FL
0
User Pic

SolarFan99

6 months ago

Does the solar light have a dimmer switch to prevent battery drain during winter months with low sunlight?

0
User Pic

Manual.ly

6 months ago

Yes, this model features an adjustable dimming function that allows you to reduce brightness or turn off the light completely. This helps conserve battery power during periods of limited sunlight, such as in winter, ensuring sufficient charge for nighttime illumination. Please check the product manual for specific settings instructions.

M: QW-35-FL
M: QW-35-FL
0
User Pic

GardenLover

4 months ago

Is this light bright enough to illuminate a garden path clearly at night?

M: QW-35-FL

Frequently Asked Questions

A

The rechargeable NiMH batteries typically have a service life of approximately two years. After this period, illumination duration and operational readiness may decline, necessitating replacement.

Is this answer helpful?

A

No, you must use rechargeable NiMH batteries. Standard non-rechargeable batteries cannot be used as they are not designed for the charging cycle required by this solar light.

Is this answer helpful?

A

If stray cats or other animals move within the detection range, the light will activate. Similarly, wind moving bushes can trigger the sensor, causing unnecessary activation during windy nights.

Is this answer helpful?

A

Yes, the product has a protection class of IP44, making it resistant to water splashes and suitable for year-round outdoor use in various weather conditions.

Is this answer helpful?

A

Install the lamp in a shadow-free, sunny location facing south. North-facing spots or areas shaded by trees and bushes are not recommended for effective charging.

Is this answer helpful?

A

Unscrew the luminary, rotate the reflector, unlock the battery compartment, remove old batteries, insert new charged ones with correct polarity, and reassemble in reverse order.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Energy-efficient operation using renewable solar power
  • Automatic motion detection enhances security and convenience
  • Durable IP44 rating suitable for all weather conditions
  • Easy installation without the need for electrical wiring
  • Long-lasting Nichia LEDs provide bright, cold white light
VS

Disadvantages

  • Requires periodic battery replacement every two years
  • Performance depends heavily on adequate daily sunlight exposure
  • Motion sensor may be triggered by stray animals or moving vegetation
  • Limited detection range of six meters may not suit large areas
  • Not recommended for north-facing installations or shaded locations
M: QW-35-FL

Product Specification

Type

Wall lamp

Fixed LEDs

yes

Socket

no

Light source

LED (fixed light source), daylight white (6500K), 2lm

Total luminous flux

2lm

Color

stainless steel

Design

round

Features

Battery powered, Solar powered, Integrated motion sensor, Integrated light sensor

Protection class

IP44

Insulation class

3

Dimensions

7.1x11.8 in (dia x h)

M: QW-35-FL

Product Description

esotec Asinar Plus Solar Sensor Wall Light - Read, Download & Print Free

The esotec Asinar Plus Solar Sensor Wall Light represents a seamless blend of energy efficiency and modern outdoor illumination. Designed for year-round performance, this solar-powered fixture utilizes a crystalline silicon solar module to harness sunlight, converting it into electrical energy stored within high-quality NiMH batteries. The system is engineered to operate autonomously, providing reliable lighting without the need for external wiring or complex installation processes.

At the heart of this device lies an advanced motion detection system paired with Nichia LED technology. During periods of darkness, the lamp emits a subtle, low-level glow that serves as a gentle orientation light, conserving energy while marking pathways or staircases. When the passive infrared sensor detects movement within its 120-degree coverage area up to six meters away, the light intensity automatically increases significantly, offering bright visibility for approximately one minute before dimming back to standby mode. This intelligent behavior ensures optimal battery usage while enhancing security and safety around your home.

Installation is straightforward, requiring only a sunny, shadow-free location on an exterior wall at a height not exceeding 1.8 meters. The unit features a robust IP44 protection class, making it resistant to splashing water and suitable for various weather conditions ranging from -20°C to +40°C. The stainless steel construction adds durability, while the included mounting hardware facilitates secure attachment to pipes or walls. Users are advised to replace the three AA batteries every two years to maintain peak performance, ensuring the duration of illumination remains consistent throughout the night.

This product adheres to strict European safety regulations and includes comprehensive guidelines for proper battery disposal and maintenance. By integrating smart sensing technology with sustainable solar power, the esotec Asinar Plus offers a practical solution for illuminating gardens, driveways, and entryways efficiently.

Important Notes

  • Always position the solar panel in direct sunlight for maximum charging efficiency.
  • Dispose of old batteries at designated recycling points; never throw them in household waste.
  • Ensure correct polarity when inserting new batteries to prevent damage.
M: QW-35-FL

© Copyright 2026 Manual.ly