Manual.ly Logo

Ergotec High Charisma Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
2011c195402df5cd1b96db3cc43109e0591b page 2
Thank you for deciding to buy your new stem from our company.
Compare the level number on the stem with the adjacent table in
order to check whether it is suitable for the intended use.
Before use please read the following assembly and safety
instructions carefully. Keep them in a safe place and pass
them on to the next owner if necessary.
Assembly
Basic technical knowledge is required for the assembly of this product. If you do
not have this knowledge, please use the services of a specialist bicycle dealer.
Check that the internal diameter of the Ahead stem clamp (28.6 mm) fits the
external diameter of the steer tube. There are 2 different sizes:
with 1“ steer tube: external diameter 25.4 mm and
with 1 1/8“ steer tube: external diameter 28.6 mm.
The internal diameter of the stem clamp must fit the external diameter
of the steer tube.
Next you should check the length of the steer tube, which should be
at least 36.0 mm
Now you place the stem on the steer tube. With a steer tube which is longer
than 38 mm you have the possibility of using spacers to adapt the height
accordingly.
Next you position this in such a way that it is aligned with the front wheel.
For safety reasons you should never combine the stem with
a carbon fork shaft – risk of breakage!
With a 4 mm hexagonal key you lightly tighten the lower steer tube clamping
screw
c
.
Before fitting the handlebars you should check that the handlebars and the
stem are compatible.
You should also check that the difference in diameter between the clamping
area of the handlebars and the handlebar clamp
d
of the stem is no greater
than +0.2 mm.
For safety reasons you should not combine the stem with
carbon handlebars – this could lead to breakage!
You should also make sure that the clamping surfaces are clean
and free from grease.
Now you insert the clamping section of the handlebars into the handlebar
clamp
d
of the stem and secure it lightly with a 4 mm hexagonal key.
After that you fit the Ahead screw of the bearings and adjust the play of the
headset, keeping in mind the mounting and safety instructions of the headset
manufacturer.
After you have adjusted the play of the headset you press plug
e
into the
opening of the ahead screw. You should make sure that the plug covers the
opening correctly and is not inserted too deeply into the clamping slit.
Now you tighten the two steer tube clamping screws
c
to an equal torque
of 6 - 8 Nm. Make sure that the stem is aligned with the front wheel and that
the plug is not pressed out of the clamping slit and the opening. If necessary
you release the two clamping screws once more and re-adjust the plug.
After that you set the grip ends to your individual requirements.
Now you tighten the handlebar clamping screws
f
crosswise on the stem
with a 4 mm hexagonal key to an equal torque of 6 - 8 Nm.
For safety reasons the max. tightness value of 8 Nm
must not be exceeded.
Assembly and safety instructions for
Ahead stem Charisma, High Charisma
Mountain-Bike/Race-Bike Safety Level
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
E-BIKE
25 km/h + 45 km/h
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
Trekking-Bike Safety Level
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
max. 140 kg max. 140 kg
max. 160 kg max. 160 kg
E-BIKE
25 km/h max. 140 kg max. 100 kg
E-BIKE
25 km/h max. 160 kg max. 140 kg
E-BIKE
45 km/h* max. 140 kg max. 140 kg
E-BIKE
45 km/h* max. 160 kg max. 140 kg
City-Bike Safety Level
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
max. 140 kg max. 140 kg
max. 160 kg max. 160 kg
max. 180 kg max. 180 kg
E-BIKE
25 km/h max. 140 kg max. 100 kg
E-BIKE
25 km/h max. 160 kg max. 140 kg
E-BIKE
25 km/h max. 180 kg max. 160 kg
E-BIKE
45 km/h* max. 140 kg max. 140 kg
E-BIKE
45 km/h* max. 160 kg max. 140 kg
Jugend/Young adult Safety Level
max. 100 kg max. 100 kg
Kinderrad/Youth-Bike Safety Level
12"-24"
Lenksystem
Steering system
Sattelstütze
Seatpost
The product classification of the ergotec Safety Level corresponds
to the DIN EN ISO 4210 norm for bikes and DIN EN 15194 for e-bikes.
E-bike-type: pedal assist up to the indicated speed.
* Retrofitting only with the approval of a recognised certifying
body and entry in the documents for the bike.
english
Valid: 11.05.2020
Guarantee
For ergotec stems the following guarantee periods apply:
with safety level 6 6 years or 35,000 km
with safety level 5 5 years or 30,000 km
with safety level 4 4 years or 25,000 km
with safety level 3 3 years or 20,000 km
with safety level 2 3 years or 15,000 km
Guarantee claims should be processed through
a specialist bicycle dealer.
CYCLINGRIGHT.COM
Safety instructions
The tightness of the bolts must be checked after approx. 500 km and once more
during the regular service intervals (with once a year as a minimum).
To prevent the risk of a fall or accident, the stem must always
be replaced if it has been damaged.
Do not attach any additional equipment such as a child‘s seat or
luggage rack to the stem. This could lead to excessive strain on the
stem and cause breakage.
c
e
f
d

Chat with your Ergotec High Charisma manual using AI

Get instant AI answers from your Ergotec High Charisma manual

Ask anything about the Ergotec High Charisma. Answers come from this manual, with the pages they are based on.

High Charisma Maintenance Schedule

Remind me when maintenance is due
Yearly
Check bolt tightness during service

Check the tightness of the bolts again during regular service intervals, at least once a year.

After approx. 500 km
Check bolt tightness

Check the tightness of the bolts after approximately 500 km to ensure safety.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend High Charisma?

Yes No

Frequently Asked Questions

A

No, for safety reasons you must not combine this Ergotec stem with a carbon steerer tube. There is a significant risk of breakage if these materials are mixed.

Is this answer helpful?

A

The maximum tightening value for both the steer tube and handlebar clamping screws is 8 Nm. You should aim for 6 to 8 Nm for optimal performance.

Is this answer helpful?

A

You should check the tightness of the bolts after approximately 500 km of riding. After that, inspect them regularly during service intervals, but at least once a year.

Is this answer helpful?

A

The steer tube must be at least 36.0 mm long to ensure the stem can be securely mounted and adjusted safely.

Is this answer helpful?

A

Yes, the warranty period depends on the safety level of the stem, ranging from 3 years or 15,000 km up to 6 years or 35,000 km.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compatible with standard 31.8mm handlebars and 1-1/8 inch steerers
  • High safety standards meeting DIN EN ISO 4210 norms
  • Generous warranty up to 6 years or 35,000 km for top safety levels
  • Clear torque specifications ensure safe and durable installation
  • Suitable for a wide range of bikes including e-bikes up to 45 km/h
VS

Disadvantages

  • Cannot be used with carbon steerer tubes or handlebars
  • Requires specific technical knowledge for proper installation
  • Maximum torque limit of 8 Nm restricts over-tightening adjustments
  • Steerer tube must be at least 36.0 mm long for compatibility
  • Additional equipment like racks cannot be mounted directly on the stem
M: QW-35-FL

Product Specification

Material

Aluminum 6061

Length

1.97 inches

Stem Clamp Diameter

1.25 inches

Steerer Tube Diameter

1.13 inches

Clamp Height

1.57 inches

Angle

+35 degrees

Weight

6.35 ounces

M: QW-35-FL

Product Description

Ergotec High Charisma 31.8mm 50mm Handlebar Stem Review

The Ergotec High Charisma 31.8mm 50mm Handlebar Stem is a robust component designed for cyclists seeking reliability and precise handling across various bike types. Whether you are riding a mountain bike, a race bike, or an e-bike, this stem offers a secure connection between your handlebars and the fork steerer tube. The product features a 31.8mm clamp diameter compatible with standard handlebars and a 50mm reach that provides a balanced riding position.

Installation requires basic mechanical knowledge. Users must ensure the internal diameter of the stem clamp matches the external diameter of the steer tube, which is typically 28.6 mm for 1-1/8 inch tubes. It is critical to verify that the steer tube is at least 36.0 mm long before mounting. For safety reasons, this stem should never be paired with carbon steerer tubes or carbon handlebars due to the risk of breakage under stress. All clamping surfaces must be clean and free of grease before assembly.

Torque specifications are vital for longevity. The steer tube clamping screws and handlebar clamping screws must be tightened evenly to a torque of 6 to 8 Nm. Exceeding the maximum limit of 8 Nm can damage the components. After installation, it is recommended to check bolt tightness after the first 500 km and then annually during regular service intervals. The Ergotec High Charisma comes with a warranty ranging from three to six years depending on the specific safety level assigned to the unit.

Important Notes

Always align the stem with the front wheel to prevent steering issues. Do not attach accessories like child seats or luggage racks to the stem as this may cause structural failure. If the stem shows any signs of damage, replace it immediately to avoid accidents.

M: QW-35-FL

© Copyright 2026 Manual.ly