Manual.ly Logo

Ergotec City Manual

0.0 · 0 Ratings

PDF manual · 6 Pages

English

M: QW-35-FL
page

/ 6

Loading...
470a8d130c7a4bbdfbb97cc9115b7800a5db page 2
Assembly and safety instructions for
english
Valid: 01.12.2020
Error and technical changes reserved. The latest version of these installation and safety instructions can also be found at www.ergotec.de
max. 100 kg
max. 120 kg
max. 140 kg
max. 100 kg
max. 120 kg
max. 100 kg
max. 100 kg
max. 120 kg
max. 140 kg
max. 100 kg
max. 120 kg
max. 100 kg
max. 120 kg
max. 140 kg
max. 160 kg
max. 120 kg
max. 140 kg
max. 120 kg
max. 120 kg
max. 140 kg
max. 160 kg
max. 120 kg
max. 140 kg
max. 120 kg
E-BIKE 25 km/h
E-BIKE 25 km/h
E-BIKE 25 km/h
E-BIKE 25 km/h
E-BIKE 25 km/h
E-BIKE 25 km/h
Jump height
<_
60 cm
Jump height
<_
60 cm
Jump height
<_
60 cm
Jump height
<_
120 cm
Jump height
<_
120 cm
Jump height
<_
180 cm
Jump height
<_
60 cm
Jump height
<_
60 cm
Jump height
<_
60 cm
Jump height
<_
120 cm
Jump height
<_
120 cm
Jump height
<_
180 cm
Mountain-Bike
Safety Level
Road-/Gravel-/Travel-Bike
Safety Level
City-/Trekking-Bike
Safety Level
Cargo-Bike
Safety Level
Young adult-Bike
Safety Level
Child Bike
Safety Level
max. 100 kg
max. 100 kg
max. 140 kg
max. 100 kg
max. 160 kg
max. 140 kg
max. 160 kg
max. 120 kg
max. 120 kg
max. 100 kg
max. 140 kg
max. 120 kg
max. 160 kg
max. 180 kg
max. 100 kg
max. 120 kg
max. 140 kg
max. 160 kg
max. 120 kg
max. 140 kg
max. 100 kg
max. 100 kg
max. 250 kg
max. 100 kg
max. 300 kg
max. 250 kg
max. 300 kg
max. 120 kg
max. 120 kg
max. 100 kg
max. 140 kg
max. 120 kg
max. 160 kg
max. 180 kg
max. 120 kg
max. 140 kg
max. 160 kg
max. 180 kg
max. 140 kg
max. 160 kg
E-BIKE 25 km/h
E-BIKE 25 km/h
E-BIKE 25 km/h + 45 km/h
E-BIKE 25 km/h + 45 km/h
E-BIKE 25 km/h
E-BIKE 25 km/h
E-BIKE 25 km/h
E-BIKE 25 km/h
E-BIKE 45 km/h*
E-BIKE 45 km/h*
Single track / Multi track
12“-24“
Single track / Multi track
Single track / Multi track
Single track / Multi track
Steering System Seatpost
The product classification of the ergotec Safety Level corresponds to the DIN EN ISO 4210 norm for bikes and
DIN EN 15194 for e-bikes. E-bike-type: pedal assist up to the indicated speed.
* Retrofitting only with the approval of a recognised certifying body and entry in the documents for the bike.
Thank you for deciding to buy your new handlebar from our company.
Compare the SAFETY LEVEL on the handlebar with the attached
table in order to check whether it is suitable for the intended use.
Before use please read the following assembly and safety
instructions carefully. Keep them in a safe place and pass
them on to the next owner if necessary.
Assembly
Basic technical knowledge is required for the assembly of this product. If you do
not have this knowledge, please use the services of a specialist bicycle dealer.
Before assembly please check that the handlebars and the stem are
compatible.
Make sure that the difference in diameter between the fixing area of the hand-
lebar
c
and the clamping area of the stem is no greater than + 0.2 mm.
Ensure that the clamping area of the stem is free from burrs, sharp edges or
similar defects which could damage the handlebars.
Make sure that the surfaces to be clamped are clean and free from grease!
For safety reasons aluminium handlebars should not be combined
with a steel stem (mixed materials), because this could lead to
breakage!
Place the fixing area
c
of the handlebar in the centre of the clamping area
of the stem and clamp it lightly.
Now set the angle of the handlebars to your individual requirements.
Tighten the handlebar clamping screw(s) on the stem to the degree of
tightness specified by the stem manufacturer.
For safety reasons the max. tightness value of 16 Nm
must not be exceeded.
Now you assemble the remaining components such as the gear lever, brake
lever, grips and bar ends in according with the instructions of the individual
manufacturer.
For safety reasons in the case of alloy-handlebars with
a material thickness less than 1.2 mm the max. tightness
value of 10 Nm must not be exceeded.
Handlebar
Guarantee
For ergotec handlebars the following guarantee periods apply:
made of highly robust micro alloy steel material 10 years or 50,000 km
with safety level 6 6 years or 35,000 km
with safety level 5 5 years or 30,000 km
with safety level 4 4 years or 25,000 km
with safety level 3 3 years or 20,000 km
with safety level 2 3 years or 15,000 km
Guarantee claims should be processed
through a specialist bicycle dealer.
Safety instructions
The tightness of the bolts must be checked after approx. 500 km and once
more during the regular service intervals (with once a year as a minimum).
You should also make a regular check on the area around the stem clamp.
If you see a hairline crack or incipient cracking the handlebars should be
replaced immediately.
Handlebars with SAFETY LEVEL 2, 3 and 4 are not suitable for mountain
biking, race biking and competitions. The heavy demands could lead to
breakage.
When transporting the bicycle upside down by car the bicycle should not
be fastened by the handlebar, because this subjects it to strong dynamic
pressure which could lead to material fatigue and possible breakage.
If handlebar bags or baskets are mounted, care must be taken to ensure
that a max. load of 10 kilos is not exceeded. Excessive loading can cause
the handlebar to break.
For safety reasons the handlebar and bar ends must always be replaced
if they have been damaged.
CYCLINGRIGHT.COM
c

Chat with your Ergotec City manual using AI

Get instant AI answers from your Ergotec City manual

Ask anything about the Ergotec City. Answers come from this manual, with the pages they are based on.

City Maintenance Schedule

Remind me when maintenance is due
Yearly
Regularly check bolt tightness and inspect for cracks

Check bolt tightness regularly during service intervals (at least once a year) and inspect the area around the stem clamp for hairline cracks or incipient cracking.

Every 500 km
Check bolt tightness after initial break-in

The manual states to check the tightness of the bolts after approximately 500 km.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend City?

Yes No

Frequently Asked Questions

A

The maximum torque value must not exceed 16 Nm for general cases. However, for aluminium handlebars with a wall thickness of less than 1.2 mm, the max torque is 10 Nm. Always follow the manufacturer guidelines for your specific stem.

Is this answer helpful?

A

Warranty periods vary by safety level. Level 6 offers 10 years or 50,000 km coverage. Level 2 offers 3 years or 15,000 km. Claims must be processed through a specialist bicycle dealer.

Is this answer helpful?

A

For safety reasons, do not combine an aluminum handlebar with a steel stem unless the wall thickness of the handlebar is 1.2 mm or greater. Mixing materials without meeting thickness specs creates a high risk of breakage.

Is this answer helpful?

A

Handlebars with Safety Levels 2, 3, and 4 are not suitable for mountain biking or races due to high demands. Check the safety level label to confirm compatibility with your intended terrain and usage.

Is this answer helpful?

A

Check bolt tightness after approximately 500 km and subsequently during regular service intervals, at least once a year. Inspect the area near the stem clamp for cracks or stress marks annually.

Is this answer helpful?

A

Yes, the product classification aligns with DIN EN 15194 for electric bikes. The system supports pedal assist up to indicated speeds, provided specific speed and load limits are respected.

Is this answer helpful?

A

You may mount bags or baskets, but the maximum additional load must not exceed 10 kg. Exceeding this limit can lead to breakage or material fatigue of the handlebar system.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High durability using micro alloy steel material for long lasting performance on various bike types.
  • Clear safety level classification ensures correct usage for different activities like cargo or city riding.
  • Comprehensive warranty coverage up to 10 years depending on specific safety level purchased.
  • Compatible with both traditional bicycles and electric bikes under specific DIN norms.
  • Detailed installation guidelines help prevent damage during the assembly process for users.
VS

Disadvantages

  • Low safety levels are not suitable for mountain biking or competitive racing environments.
  • Strict torque limits require careful installation to prevent material fatigue and potential breakage.
  • Cannot transport bikes upside down on handlebars to avoid dynamic force stress damage.
  • Aluminum handlebars may not be compatible with steel stems if wall thickness is too low.
  • Maximum load for bags and baskets is limited to 10 kilograms total weight.
M: QW-35-FL

Product Specification

Type

Low Riser

Handlebar Shape

oval

Material

Steel

Colors

black, silver

Width

23.03 in

M: QW-35-FL

Product Description

Discover the Versatility of the Ergotec City Handlebar

The Ergotec City Handlebar Black is designed for urban cyclists who value safety and durability above all else.

This product fits seamlessly into various bike configurations, ensuring a secure grip even during challenging daily commutes.

Riders often seek components that balance inherent strength with manageable weight for easier handling.

This handlebar system delivers exactly that through the use of advanced micro alloy steel materials and precise engineering standards designed for modern transport needs.

Understanding Safety Levels and Compatibility

Each unit features a Safety Level classification ranging from two to six, which is clearly visible on the component.

This metric fully aligns with DIN EN ISO 4210 norms for traditional bicycles and DIN EN 15194 for electric bikes used globally.

Higher levels indicate superior stress resistance suitable for heavier loads or more aggressive terrain.

For standard city riding, level four or higher provides ample protection against normal wear and tear.

Serious cargo riders may require levels five or six due to the significantly increased loads carried over the lifespan of the bike.

Always verify the specific label on your unit against your intended bike type before installation begins to avoid compatibility issues.

Installation Precision Matters for Safety

Proper assembly is absolutely crucial for long-term performance and user safety on the road.

Ensure the diameter difference between the handlebar and the stem clamp does not exceed 0.2 millimeters during initial checks.

Surfaces must be perfectly clean and free of grease to prevent slippage while riding at speed.

Avoid mixing aluminium handlebars with steel stems if the wall thickness is below 1.2 millimeters to prevent material fatigue and sudden breakage.

Torque values should be strictly observed during tightening, generally not exceeding 16 Nm unless specified otherwise.

Always check tightness again after the first 500 kilometers of use to ensure security remains intact.

Maintenance and Longevity Guidelines

Regular checks are essential to prevent accidents and extend the useful life of your equipment.

Inspect areas near the stem clamp frequently for any signs of hairline cracks or stress marks once a year minimum.

Lower safety levels restrict use in aggressive mountain biking or high-speed competitive racing environments where forces are too high.

Transporting bikes upside down on handlebars creates dangerous dynamic forces that could break the part quickly.

Load bags and baskets carefully to stay permanently under ten kilograms total weight.

With proper care, the warranty covers many years of service depending on the level purchased initially.

Investing time in maintenance ensures peace of mind on every ride.

Claims must always be processed through an authorized dealer to keep the warranty valid indefinitely.

Always keep the original instructions for future reference or resale.

M: QW-35-FL

© Copyright 2026 Manual.ly