Manual.ly Logo

EM2GO Single Power EMB011AC1RW Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 12

Loading...
492812d3d2782f4290a2493633256a017f69 page 7
Type 2 Plug 3-Phase Type 2 Socket
Thank you for choosing the EM2GO charging station
for electric vehicles.
With this smart wallbox, you have chosen a high-precision EV charger equipped with many
safetyrelated protection devices, which guarantees all-round carefree charging of your vehicle.
Important Notice:
This manual contains important instructions and information to be observed during installation,
operation and maintenance. Read all safety information and warnings in this manual to be aware of
potential hazards.
This manual is intended for installation and maintenance personnel as well as end customers.
Keepthis user manual in a safe place.
Safety signs used
The following warning, command and information signs are used in this manual, on and in the
EV charging station.
CAUTION: Warning of electrical hazards.
This sign is intended to alert the user that serious injury or substantial property damage
may result if the equipment is not operated as instructed.
WARNING: Warning of a hazardous location or dangerous situation.
This sign is intended to alert the user that minor injury or property damage may result if the
equipment is not operated as instructed.
CAUTION: Do not touch with hands when electrostatic discharge is possible. Indicates
the possible consequences of touching electrostatically sensitive components.
IMPORTANT NOTICE:
According to §19 NAV of March 21, 2019, the operation of charging devices for electric vehicles must
be reported to the responsible grid operator before use (from 11 KW), as well as before installation
(from 22 KW). This can also be done by the commissioned electrical installer.
Please contact your electricity provider by phone or online for more information.
WARNING!
When using electrical products, always observe these basic precautions.
• Do not install or use the charger near explosive, corrosive or ammable materials, chemicals or
vapors.
• The charger may only be installed on non-combustible surfaces such as concrete, and at least
120cm above the oor.
• The charger must be safely grounded.
• Turn o󰀨 the power to the charger before assembling or servicing the charger.
• The device is designed only for vehicles compatible with the IEC 62196 standard for charging
modes.
• Do not use the charger if it is defective or has visible damage
• Do not attempt to ö󰀨nen, disassemble, repair, tamper with or modify the device. If you have
any questions or need repairs, contact our customer service department.
• Do not use the charger when you are in the vehicle.
• Do not use the charger when exposed to heavy rain, snow or inclement weather.
• Always exercise caution when transporting the charger.
• Do not touch the charging terminal with sharp metallic objects
• Do not pull the charging cable with force or over sharp objects.
WARNING!
The device may only be installed, adjusted and serviced by qualied persons familiar with the cons-
truction and operation of this type of electrical equipment.
Failure to observe this precaution can result in serious injury or even death.
• Incorrect installation and testing of the charger can possibly lead to damage. No liability is accepted
for the resulting damage.
• Ensure that the charging cable is correctly positioned during the charging process and cannot
be stepped on, damaged or stressed.
• Check wire diameter according to local electrical requirements.
• Switch o󰀨 the corresponding power supply before starting the installation.
• The charger must be installed and commissioned by qualied personnel.
• Before installation, the supply cable and house connection values must be checked.
Abbreviations:
A | ampere, unit of current
V | volt, unit of voltage
EV | electric vehicle
EVSE | Equipment for the supply of EV according to IEC61851-1
RFID | Radio Frequency Identication Card
IP | Protection class
RCMU | Residual current monitoring unit
MCB | Circuit breaker
Technical data:
• Operating voltage: 400V AC ±10%, 50-60 Hz, 3-phase
• Operating current: 16A
• Max. Output power Typically 11 kW
• Housing: IP65, splash-proof
• Input terminals: L1, L2, L3, N, PE
• Connection: Type 2 plug
• IEC 61851-1 Charging mode: Mode 3
• Communication interfaces: Communication interface: BT, RFID
• Safety devices: Overvoltage protection, overtemperature, over/undervoltage, overcurrent,
protection against fault currents (RCMU 30mA AC+6mA DC) and protective conductor faults
for TN system (TN-C, TN-S and TN-C-S).
• Display: LED
• Structure: CE standards IEC 61851-1 IEC 62196-2:2016, IEC 60364-7-722
• Material: PC+ASA
• Connection length: type 2 cable 5 meters, supply cable 60cm (5x4mm²)
• Operating temperature: -30 to +55 °C
• Dimensions: 180 mm × 180 mm × 64.5 mm
• Weight: 4kg
Representation of Type2 plug / socket according to
IEC 62196-2
GB GB
11 12

Chat with your EM2GO Single Power EMB011AC1RW manual using AI

Get instant AI answers from your EM2GO Single Power EMB011AC1RW manual

Ask anything about the EM2GO Single Power EMB011AC1RW. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Single Power EMB011AC1RW?

Yes No

Frequently Asked Questions

A

No, professional installation is required. A qualified electrician must handle the wiring and connection to the main grid to ensure safety and compliance with local electrical standards.

Is this answer helpful?

A

Yes, the housing has an IP65 rating, which means it is fully protected against water jets and dust ingress, making it suitable for outdoor use.

Is this answer helpful?

A

It connects via Bluetooth to the EM2GO App. You do not need Wi-Fi for the local Bluetooth connection, though internet access is needed for app registration.

Is this answer helpful?

A

You can start charging by pressing the control button on the device after plugging in or by holding an authorized RFID card near the reader.

Is this answer helpful?

A

The warranty period is two years, provided all instructions for use, maintenance, and storage are followed strictly without unauthorized modifications.

Is this answer helpful?

A

Check the wiring connections and ensure the input voltage is correct. Refer to the error code table for specific fault handling instructions.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Delivers 11 kW of charging power suitable for home installations.
  • IP65 rated housing protects against water jets and dust effectively.
  • Bluetooth and RFID connectivity enables easy app control and authentication.
  • Built-in safety features include overvoltage and overcurrent protection.
  • LED status indicator provides clear feedback on charging states.
VS

Disadvantages

  • Professional installation is required by qualified electricians.
  • Two-year warranty voids if instructions or local regulations are ignored.
  • Cable length of 5m may not reach all parking spots without extension.
  • Grid operator notification required before use for installations over 11 KW.
  • Repair requires sending device to factory for damaged internal components.
M: qwen/qwen3.5-flash-20260224

Product Specification

Number of Charging Points

1

Max. Charging Power

11kW, 3-phase

Charging Mode

IEC 61851-1 (Mode 3)

Number of Phases

3-phase

Voltage

400V (AC)

Current per Phase Max.

16A

Connector Type

Type 2

Connection Method

16.40 ft Cable

Mounting

Wall Mount

Authorization

App, RFID

Interfaces

Bluetooth

Features

Residual Current Protection

Ingress Protection

IP65

Color

Black

Dimensions

7.09 x 7.09 x 2.54 in (WxHxD)

Weight

8.82 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Revving Up Your EV with the EM2GO AC Wallbox Single Power

Welcome to the Future of Electric Mobility

Owning an electric vehicle is an exciting step toward a greener and more sustainable future for everyone. The EM2GO AC Wallbox Single Power 11kW is specifically designed to make charging at home incredibly simple and reliable for every day use. This smart wallbox offers precision engineering and numerous advanced safety features built directly into the core system architecture. It guarantees a completely carefree charging experience for your vehicle regardless of external weather conditions. When you look for the EM2GO AC Wallbox Single Power 11kW, 5m Charging Cable Manual, you want to ensure you have all the critical information needed for safe setup and long term operation. Understanding the documentation helps owners avoid potential pitfalls during the initial installation phase and ensures proper usage later.

Key Features and Benefits

This charger delivers up to 11 kW of power, which is suitable for most home installations in modern households today. The housing is IP65 rated, meaning it is fully protected against water jets and dust ingress effectively over time. This specific rating makes it ideal for outdoor wall mounting where exposure to elements is common and frequent. The included 5m cable ensures sufficient flexibility when parking your car in a random spot at night. Safety mechanisms like overheating protection and overcurrent monitoring are built-in to prevent damage to the unit or vehicle. The system complies with strict international standards for electric vehicle supply equipment and grid requirements.

Smart Connectivity

Modern charging solutions require seamless connectivity with mobile devices for optimal user experience. The station features robust Bluetooth interfaces for use with the dedicated EM2GO App platform available on stores. You can monitor real-time data and track all charging sessions remotely from your smartphone screen. RFID cards allow for easy authentication and control of power flow without touching the box physically. The LED display indicates status clearly through various color codes for immediate feedback to the user. This helps users understand instantly if the vehicle is connected or if there is a system fault visible.

Installation and Maintenance

Safety is absolutely paramount during the installation process of any electrical device including this wallbox. A qualified electrician must handle the wiring and connection to the main network grid. The unit requires a specific type of residual current device for additional protection layers as per standards. Regular maintenance ensures long service life and reliability for years of daily usage. Keep the manual accessible for quick troubleshooting whenever questions arise during routine checks. Proper grounding prevents electrical shocks and ensures the system functions correctly under all conditions.

Important Notes

Always check local grid regulations before powering up the new unit to ensure compliance. Ensure the unit is grounded correctly to prevent potential hazards to people and property. Contact the support team if error codes persist after initial checks and reset attempts. A two year warranty is provided provided all instructions are followed strictly without modification. Contact support via the website if repairs are needed beyond standard troubleshooting steps provided. Recycling helps protect the environment from electronic waste hazards found in batteries.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly