Manual.ly Logo

EM2GO AC Wallbox Manual

0.0 · 0 Ratings

PDF manual · 8 Pages

English

M: OA-GPT-5-NAN
page

/ 8

Loading...
7fabef8d77d583761a05acf3125ed48e01d5 page 5
1
2
3
4
5
4
GB
Thank you for choosing the EM2GO electric vehicle
charging station.
With this unit you have chosen a high-precision charger equipped with many safety-relevant
protective devices, which guarantees an all-round carefree charging of your vehicle.
Important Note:
Please read these important safety instructions for charging your vehicle.
Please keep this user manual. The charger has many safety functions. Read all safety
information and warnings in this manual to become aware of possible dangers.
Warning
Basic precautions should always be followed when using electrical products.
This manual contains important instructions, including the following, which are required and
must be followed during installation, operation and maintenance.
• Do not install or use the charger near explosive, caustic or ammable materials,
chemicals or vapours.
• Switch o󰀨 the input power of the charger before installing or servicing the charger.
• The device is only designed for vehicles that are compatible with the IEC 62196 charging
standard.
• Do not use the charger if it is cracked, frayed, broken or damaged
• Do not try to open, disassemble, repair, manipulate or modify the device
If you have any questions or repairs, please contact our customer service.
• Do not use the charger when you are in the vehicle or when exposed to heavy rain,
snow or severe weather.
• Be careful when transporting the charger.
• Do not touch the charging connector with sharp metal objects
• Do not pull the charging cable with force or with sharp objects
Warning
The device must be installed, adjusted and serviced by qualied electricians or
people who are familiar with the construction and operation of this type of EV-Charger
Failure to follow this precaution could result in death or serious injury.
• Incorrect installation and testing of the charger can lead to damage
No liability is assumed for the resulting damage.
• Make sure that the charging cable is well positioned during the charging process cannot be
walked on, damaged or burdened.
• Check the wire diameter according to the local electrical requirements
• Switch o󰀨 the corresponding power supply before starting the installation.
Technical data:
• Operating voltage: 400V AC ±10% , 50-60 Hz, 3-Phases
• Operating current: 32 amps
• Max. Output power: typically 22 kW
• Housing: IP66, splash water protected
• Operating temperature: -25 to + 55 °C
• Display: Colour LCD, LED-stripes
• Protection against: over and under voltage, overload protection, short circuit protection,
over temperature protection, lightning protection, fault current (RCD A + 6mA DC).
• Connection: Type 2 plug (CT) | Type 2 socket (ST)
• Cable length: 6.1 meters (CT)
• Structure: CE standards EN61851-1: 2011, EN61851-22:2002
• Dimensions: 65 x 195 x 295 mm
• Weight: 7 Kg
Important Note:
According to §19 NAV of March 21, 2019, the operation of charging devices for electric
vehicles must be reported to the responsible electricity provider before use (from 11 KW)
and before installation (from 22 KW).
This can also be done by the commissioned electrician.
Please contact your electricity provider by phone or online
for more information.
Assembly
To install the charging station, follow the
installation instructions on pages 5 and 6
of this manual.
Overview
1. CEE plug with 1.5 meter connection cable suitable
for 380V AC three-phase current pre-congured
2. Colour display
3. On / o󰀨 switch
4. LED strip
5. EV charger plug (CT) | Type 2 Socket (ST)

Chat with your EM2GO AC Wallbox manual using AI

Get instant AI answers from your EM2GO AC Wallbox manual

Ask anything about the EM2GO AC Wallbox. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend AC Wallbox?

Yes No

Frequently Asked Questions

A

The unit operates at 400V AC ±10%, 50–60 Hz, three-phase with a nominal operating current of 32 A and a typical maximum output power of 22 kW.

Is this answer helpful?

A

Yes. Installation must be performed by a qualified electrician. Per §19 NAV, charging equipment operation (from 11 kW) and installations (from 22 kW) must be reported to the responsible electricity provider; an electrician can submit this notification.

Is this answer helpful?

A

Built-in protections include over- and under-voltage, overload, short-circuit, over-temperature, lightning protection, and residual-current protection (RCD Type A with 6 mA DC filter). These ensure safe operation and fault detection.

Is this answer helpful?

A

Disconnect the charger from the vehicle and mains, visually inspect connectors, cables and the unit. If no damage is visible, reconnect once. If the red LED persists, keep the unit disconnected and contact technical support.

Is this answer helpful?

A

Yes. The housing is rated IP66 for splash and dust protection and the operating temperature range of -25 to +55 °C supports outdoor use, provided installation follows local codes and mounting recommendations.

Is this answer helpful?

A

The CT (cable type) variant includes a fixed Type 2 cable (6.1 m) with a CEE plug; the ST (socket type) provides a Type 2 socket to connect your own charging cable. Choose based on preferred setup and cable management.

Is this answer helpful?

A

The warranty period is two years. It is voided by missing proof of purchase, exceeding the warranty timeframe, unauthorized repairs or modifications, damage from misuse, ingress of foreign objects, or force majeure events.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • High output up to 22 kW (three-phase) suitable for faster home or workplace charging.
  • Robust IP66 housing and wide operating temperature (-25 to +55 °C) for outdoor use.
  • Comprehensive safety: over/under voltage, overload, short-circuit, over-temp, lightning, RCD Type A + 6 mA DC.
  • User-friendly interface with color LCD and LED strip for real-time status and diagnostics.
  • Flexible mounting options: cable type (6.1 m CT) or socket type (ST) to fit installation needs.
VS

Disadvantages

  • Requires qualified electrician for installation and grid notification for higher power units.
  • Warranty void if unauthorized repairs, improper use, or lack of proof of purchase.
  • Fixed 1.5 m connection cable radius for CT variant may limit placement options.
  • Some vehicles may not start charging automatically and require manual switch activation.
  • Weight and dimensions limit portability; intended primarily for permanent installation.
M: OA-GPT-5-NAN

Product Specification

Number of charging points

1

Charging mode

IEC 61851-1 (Mode 3)

Number of phases

3-phase

Voltage

400V (AC)

Connector type

Type 2

Mounting

Wall mounting

Authorization

App, RFID

Color

black

M: OA-GPT-54-NAN

Product Description

EM2GO AC Wallbox Manual — Overview and Key Features

The EM2GO AC Wallbox is a robust, user-focused EV charging solution offering up to 22 kW (three-phase) charging power. Designed to meet modern safety and performance standards, it pairs a Type 2 connection (plug or socket variants) with a durable IP66-rated enclosure, a color LCD, and an LED status strip to keep users informed throughout the charging process. Operating from 400V AC ±10% at 32 A, the unit supports reliable charging across a wide temperature range (-25 to +55 °C) and includes multiple protections such as over/under voltage, overload, short-circuit, over-temperature, lightning protection, and RCD Type A with 6 mA DC detection.

The wallbox is available as a cable type (CT) with a 6.1 m cable and CEE plug or as a socket type (ST) to accept a separate Type 2 cable. Installation is intended for qualified electricians and follows clear mounting steps: position using the supplied paper template, secure the mounting plate and station, and ensure the CEE socket lies within the specified 1.5 m cable radius. The unit includes a high-resolution display showing real-time charging power, three-phase voltage/current, charge time, energy consumption, unit temperature, and status indicators.

Operational notes emphasize user safety and correct procedure: always disconnect mains power before installation or service, avoid use in severe weather or near flammable materials, inspect cables and connectors regularly, and do not attempt unauthorized repairs. The LED strip provides immediate state feedback (idle, connected, charging, complete, or fault). If the LED flashes red, disconnect the charger and vehicle, visually inspect for damage, and if the fault persists contact support.

Regulatory and maintenance guidance highlights CE conformity and applicable EU directives (EMC, Low Voltage, Radio Equipment). Per §19 NAV (21 March 2019), owners must notify the grid operator before use for chargers ≥11 kW and before installation for chargers ≥22 kW; an electrician can file this notification. The product carries a two-year warranty with exclusions for misuse, unauthorized modifications, force majeure, missing proof of purchase, or failure to follow maintenance/storage instructions.

Practical details include compact dimensions (65 x 195 x 295 mm), 7 kg weight, mounting accessories and instructions, and guidance on ensuring the three-phase socket is equipped with appropriate residual-current protection (Type A RCD + 6 mA DC filter). The documentation also reminds users of proper end-of-life recycling in accordance with EU WEEE regulations.

Notes

  • Ensure a qualified electrician performs installation and grid notifications where required.
  • Use only intact cables and connectors; never force or damage the Type 2 connection.
  • Follow local electrical codes for conductor sizing and protection devices.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly