Manual.ly Logo

Elinchrom ELM8 Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-5-NAN
page

/ 2

Loading...
a28250edea9d665cb170a161a149eef34ddc page 2
WARRANTY
Your Light & Motion product is covered against defects in workmanship
and materials under normal use and service for 2 years from the date of
purchase. Rental program carries a 1 year warranty.
WARRANTY LIMITS & EXCEPTIONS
• Batteries are warrantied for 90 days.
• Cosmetic discoloration from wear and use is not covered.
• Light & Motion is not liable for any loss damages or expenses
including incidental or consequential damages directly or indirectly
arising from the sale or use of this product.
Go to support.lightandmotion.com & elinchrom.com for additional information.
DECLARATION OF EU CONFORMITY
ELM8 ACCESSORIES
LIGHT MODIFIERS
50˚Focus Optic DM
800-0337-A
Barn Doors
800-0284-A
Dome Port DM
800-0335-A
Flat Port DM
800-0340-A
Speedring
Gel Holder
800-0283-B
800-0344-A (Gel Frame)
3 CTO Set (Full, 1/2, 1/4)
800-0341-A
Fresnel 25˚
800-0302-A
EL Modifier
Interface
800-0343-A
CHARGERS & POWER
24V Power Supply
800-0272-A (US/JP)
Car Cable Pro (12v)
800-0300-A
High Leverage Handle
800-0306-A
MOUNTS
OTHER ACCESSORIES
C-Stand Mount
800-0291-A
YSMount Base w/
Umbrella Holder
800-0307-A
Remote Control
19300
ADDING MODIFIERS/MOUNTS
Any changes/modications to this equipment not approved by Light &
Motion could void the user’s authority to operate the equipment under
regulatory guidelines.
This device receives and transmits radio signals at 2.4GHz.
Please observe the following precautions:
This device may interfere with medical or navigational equipment. Do not
operate with the radio control feature enabled in a hospital or on an
airplane without rst obtaining permission of hospital or airline staff.
Be aware the performance of the radio control feature can be affected by
electrical currents, magnetic elds, radio signals, wireless routers,
cellular phones, and other electronic devices.
Environmental objects such as large buildings, wall, trees, fences, or
cars can also affect radio link performance.
905-0464-A
CARE & MAINTENANCE
• Maintain o-rings with a light coating of silicone grease to preserve seal.
• Clean charge terminals with rubber pencil eraser or cotton-tipped or foam-tip swab
with vinegar/water solution.
STORAGE & TRAVEL
• Never store the lights with the batteries fully discharged as this may cause permanent
damage to the batteries.
• Store your light partially to fully charged for long life.
• Do not leave lights in direct sun or stored in hot location as this can cause damage.
• Turn power sitch off for travel.
* DM = DIRECT MODIFIER
CAN ICES-3 (B)/NMB-3(B)
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful inerference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the EQUIPMENT off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
To comply with the limits for an FCC Class B computing device, always use the included
power cables with the common-mode ferrite cores attached as supplied
Product name:
ELM8
Name of Responsible Party:
Light & Motion Industries, 711 Neeson Rd, Marina, CA 93933, +1831-645-1538
** All other modifiers are attached via the EL Modifier Interface
1/4-20 Adapter
800-0286-A

Chat with your Elinchrom ELM8 manual using AI

Get instant AI answers from your Elinchrom ELM8 manual

Ask anything about the Elinchrom ELM8. Answers come from this manual, with the pages they are based on.

ELM8 Maintenance Schedule

As needed
Maintain o-rings

Apply a light coating of silicone grease to preserve the seal.

As needed
Clean charge terminals

Use a rubber pencil eraser or cotton-tipped swab with vinegar/water solution.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend ELM8?

Yes No

Frequently Asked Questions

A

The ELM8 can reach up to 8000 lumens at peak when powered from AC or external DC and when the internal battery is sufficiently charged. Battery state affects maximum output—keeping it above 50% helps ensure full performance.

Is this answer helpful?

A

The unit uses an integrated variable-speed fan that automatically operates when output passes certain thresholds. It runs at low speed between roughly 5200–6300 lumens and high speed above that range to manage thermal load and prevent overheating.

Is this answer helpful?

A

Yes, but be cautious: modifiers that cover the heat sink can trap heat and reduce light output. Open modifier vents or reduce lumen settings to avoid overheating. Use the EL Modifier Interface for compatible accessories.

Is this answer helpful?

A

The ELM8 supports internal battery operation, a 24V AC power supply, and external DC sources (including car cable 12V options). For maximum continuous output, use AC or external DC and maintain battery charge above 50%.

Is this answer helpful?

A

The OLED menu is accessed by a long press of the middle button; short presses of the front/rear buttons adjust values up/down and a short press of the middle button advances options. The menu times out after 20 seconds of inactivity.

Is this answer helpful?

A

Store the unit partially to fully charged; never leave batteries fully discharged. Avoid storing in direct sunlight or hot environments. Maintain O-rings with light silicone grease and clean charge terminals with a soft eraser or swab and mild vinegar solution.

Is this answer helpful?

A

The ELM8 includes Skyport radio capabilities for remote control and group/channel settings, but radio use can be affected by interference and is restricted in settings like hospitals or airplanes—obtain permission before use in such locations.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Very high peak output (up to 8000 lumens) suitable for demanding lighting needs.
  • Integrated OLED display and easy three-button menu for quick adjustments.
  • Flexible power options: internal battery plus AC/external DC for extended use.
  • Wide accessory ecosystem (modifiers, mounts, gel frames, Fresnel, optics).
  • Automatic variable-speed fan and thermal management to protect output.
VS

Disadvantages

  • Peak output depends on battery charge; performance may drop if battery is low.
  • Third-party modifiers can trap heat and force reduced lumen output.
  • Fan noise may be present at high output speeds during bright operation.
  • Batteries warrantied for limited time; long-term battery care required.
  • Radio features can be affected by interference and restricted in some locations.
M: OA-GPT-5-NAN

Product Specification

Light Output

16,320 Lux (1m)

Color Temperature

5,600K

Special Features

Battery, LED

Dimensions

8.07x3.78x3.78in (WxHxD)

Weight

2.65 lb

M: OA-GPT-54-NAN

Product Description

Elinchrom ELM8 — Powerful, Portable LED Light

The Elinchrom ELM8 is a high-output, compact LED light engineered for photographers and videographers who need reliable, studio-grade illumination on location or in the studio. Offering up to 8000 lumens on peak and optimized performance when run from external power, the ELM8 balances raw output with thermal management and portability. Its integrated OLED display and intuitive button-driven menu make settings and exposure adjustments straightforward, while an internal battery enables mobility when AC power isn't available.

Key Features and Use

The ELM8 delivers strong lumen output and includes an intelligent cooling system: a variable-speed fan engages automatically above specific output thresholds to manage heat and maintain consistent performance. When connected to AC or external DC power the unit can reach its top lumen rating; however, battery charge level affects maximum output—keeping the battery above 50% is recommended for full performance. Third-party modifiers that obstruct the heat sink can trap heat and trigger output reduction, so proper ventilation or lowered lumen settings may be required when using dense softboxes.

The control interface uses an OLED display with three-button navigation: long-press the center button to access the menu, short presses to navigate and adjust parameters, and an automatic timeout returns to the main screen after inactivity. Skyport radio support, group and channel selection, lumen/percentage readouts, and status icons for overheating, charging, battery, and external power give clear operational feedback. The menu times out after 20 seconds of no interaction.

Accessories and Mounting

A range of dedicated modifiers and accessories are available, including focus optics, barn doors, dome and flat ports, Fresnel units, gel frames, speedring holders, and multiple mount options like C-stand and umbrella-ready bases. Power options include a 24V supply and vehicle cable for 12V operation, while handles, mounts, and remote controls expand usability for both photo and video workflows. Third-party modifiers attach via the EL Modifier Interface.

Practical Notes

For continuous maximum output, run the lamp on external power with the battery charged. Avoid storing the unit with fully discharged batteries and keep it out of hot, sun-exposed environments. Maintain seals and charge terminals to ensure longevity. Observe radio-use precautions in sensitive environments (aircraft, hospitals) and follow FCC guidance for radio devices.

Notes:

  • Keep battery above 50% for maximum lumen output.
  • Ensure modifiers don’t block heat dissipation.
  • Use included power cables with ferrite cores to meet FCC limits.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly