Manual.ly Logo

ELAC Navis ARF-51 Manual

0.0 · 0 Ratings

PDF manual · 41 Pages

English

M: OA-GPT-54-NAN
page

/ 41

Loading...
26e39ff0b7d5ac114fc3bea07793723b957d page 2
ELAC Navis Speakers | www.elac.com | Page 1
Safety Instructions
1. General information
• Please read and follow these safety instructions.
• Keep them safe for future reference.
• Observe all warnings on the speaker and in the manual. Please check the speaker for damage before
use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury.
2. Use only as directed
• Connect the speaker(s) according to the instructions in the manual.
• Many ELAC speakers are equipped with spikes and/or anti-slip feet. They are explicitly provided for
levelling the speaker. For levelling on an uneven floor, unscrew the spikes or anti-slip feet by 2-3 turns of
thread. The speaker should always be in perfect vertical alignment: the stability of the speaker must not
be compromised by using spikes or anti-slip feet as the speaker may tip-over.
3. Location
• Install the speakers on a level surface only
• When choosing the location of these speakers do not place them in locations that are:
• In direct sunlight
• Very humid
• Prone to vibrations
• Exceptionally hot or cold
• Near CRT Televisions (the speakers are not magnetically shielded and may cause color issues
with a CRT based TV)
• Close to magnetic cards (Since the speakers are not magnetically shielded placing magnetic
cards such as credit cards or commuter cards may cause them to fail).
WARNING! Please ensure the product is perfectly stable to avoid injury from tip-over. Please note, that stability
can be increased by using spikes on carpeted surfaces. However, the mounting of spikes must be carried out
carefully due to their very sharp ends which may cause injuries. The stability on slippery floors can be increased
by using Velcro fastening tape or double-sided adhesive tape. Do not install the speaker near any heat sources
such as radiators, heating valves, stoves, or other apparatus (including amplifiers) that produce heat, or in areas
where there is a risk of explosion.
• Do not block any ventilation openings. Install in accordance with the instructions.
• Do not install the speaker in a closed rack or in a closed cupboard.
• Do not put burning candles on or near the speaker.
• Do not install the speaker near transformers because electromagnetic stray fields can cause hum noise
on woofers.
• In combination with certain materials / lacquers / material surfaces, anti-slip feet or spike washers may
cause colored imprints on the surfaces.

Chat with your ELAC Navis ARF-51 manual using AI

Get instant AI answers from your ELAC Navis ARF-51 manual

Ask anything about the ELAC Navis ARF-51. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Navis ARF-51?

Yes No

Frequently Asked Questions

A

It is a powered loudspeaker with built-in amplification, so you do not need a separate power amp. This simplifies the system while still offering high performance and direct control over the sound.

Is this answer helpful?

A

Yes. It supports AirX² wireless pairing, which makes cable-free connection possible when used with compatible ELAC wireless transmitters. Wired RCA and XLR connections are also available.

Is this answer helpful?

A

No, it does not include a volume knob. It should be connected to a source with variable output, such as a preamp or AV processor, to avoid sending full-level signal to the speakers.

Is this answer helpful?

A

The speaker includes LF, MF, and HF EQ switches, plus gain adjustment and a high-pass filter. These controls help fine-tune bass, vocal presence, treble balance, and subwoofer integration.

Is this answer helpful?

A

No, a subwoofer is not required. The ARF-51 is a full-range speaker on its own, but the high-pass filter makes it easy to integrate one if you want deeper low-end extension.

Is this answer helpful?

A

Place the speakers on a stable, level surface and keep them away from heat, moisture, and tight enclosed spaces. Leave some distance from walls or corners for better bass balance and imaging.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Three-way powered design with dedicated amplification for bass, mids, and treble.
  • Flexible connectivity through RCA, XLR, and AirX² wireless input options.
  • Room-tuning controls help adapt sound to different spaces and preferences.
  • Stable floorstanding design with outriggers and spikes for better support.
VS

Disadvantages

  • No built-in volume control, so it must be paired with a variable output source.
  • Setup can be sensitive to placement, especially near walls or room corners.
  • Spikes and heavy base parts require care during assembly and positioning.
  • Wireless and tuning features add flexibility, but also make setup more involved.
M: OA-GPT-54-NAN

Product Specification

Type

Floorstanding speaker

Principle

3-way

Tweeter

1x 1"/1.00in

Midrange driver

1x 3.90"/3.90in

Woofer

3x 5.90"/5.90in

Frequency range

43Hz-28kHz

Features

active

Dimensions (WxHxD)

7.44x40.35x9.45in

Weight per piece

23.15lb

M: OA-GPT-54-NAN

Product Description

ELAC Navis ARF-51: Powered Performance with Room-Tuning Flexibility

The Elac Navis ARF-51 Manual reveals a speaker system built for listeners who want serious sound without the complexity of a separate amplifier stack. The Navis ARF-51 is a powered 3-way floorstanding speaker designed to deliver detailed highs, clear mids, and strong bass from a refined, modern cabinet. With its active architecture and carefully matched amplification, it aims to bring a full-range listening experience into a living room, media room, or dedicated music space.

One of the most appealing parts of the ARF-51 is its versatility. It supports RCA, XLR, and AirX² wireless connections, making it easy to integrate into different setups. That flexibility is paired with practical sound-shaping tools, including low-, mid-, and high-frequency EQ controls, plus a high-pass filter for systems that include a subwoofer. For users who enjoy tailoring sound to their room, these controls make the ARF-51 feel more personal and adaptable than a typical powered speaker.

The design also reflects ELAC’s focus on stability and careful installation. The ARF-51 uses an outrigger base and spikes to improve support, especially on carpet or uneven flooring. Placement matters too: giving the speakers a little breathing room from walls and forming a proper stereo triangle can noticeably improve imaging and bass balance. In other words, the ARF-51 rewards thoughtful setup with a more open, natural soundstage.

Power is another highlight. With 300 watts total amplification and a 3-way driver layout, the speaker is built to handle dynamic music, movie soundtracks, and everyday listening with confidence. It is not just about loudness; it is about control, clarity, and consistency across the frequency range. That makes it a strong choice for listeners who want a premium active loudspeaker that feels equally at home with critical music playback and relaxed daily use.

Notes

  • Use only with a variable output source.
  • Keep both speakers matched in EQ settings for the most consistent sound.
  • If adding a subwoofer, set the high-pass filter to the appropriate crossover mode.
  • Regular cleaning should be limited to a soft cloth or dust brush.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly