Manual.ly Logo

ELAC Concentro Manual

0.0 · 0 Ratings

PDF manual · 52 Pages

English

M: QW-35-FL
page

/ 52

Loading...
f2528d5ac68c8906a4f7050d2d037de38a89 page 10
Operating, connecting the speakers to the hi-fi equipment
Connect the loudspeakers to the amplifier of your hi-fi system. For this, only one cable per loudspeaker is required.
The cable must be bipolar. The positive and negative pole should be clearly marked in order to avoid invert-
ed polarity. The length of the cable depends on the place where you are going to install the hi-fi system. Trim
the cable, so there is 20-30% excess cable. The length of the cable determines the cross-section of the ca-
ble. With a length of 5 m per loudspeaker, the cross-section of a copper lead should be at least 2 qmm². With
a length of 10 m, the smallest cross-section should be 4 qmm², etc. Under these conditions, the Ohms re-
sistance remains practically constant and neglible. In order to reduce the cable’s inductive behaviour (reduc-
ing treble) you should rather use stranded wire than solid wire.
We presume, that the electric components of a hi-fi system are completely mounted and connected.
Please switch off all components (Power).
Place the two speakers on the floor (e. g.), next to each other, each baffle placed next to each baffle.
Now connect the speaker cables to the output terminals of the amplifier. Twist the cable ends in order to cre-
ate a large area of contact. Please ensure, that the left amplifier channel is connected to the left speaker (left
to left/right to right).
It is important to match the polarity of both speakers. The positive poles of the amplifier outputs must be
connected to the positive poles of the inputs of the speaker (red terminals).
The hi-fi system is now ready to run. The volume control of the amplifier shall be turned to less than ¼. Be-
fore you switch on the amplifier, switch on all other units of the hi-fi system.
Now listen to a piece of music you know very well. The sound of it might appear different because the speakers re-
spond to each other and do not emit the sound towards the room.
If the bass sounds very strong, the polarization of the hi-fi system has been carried out correctly.
Connecting the speakers to a stereo system
16

Chat with your ELAC Concentro manual using AI

Get instant AI answers from your ELAC Concentro manual

Ask anything about the ELAC Concentro. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Concentro?

Yes No

Frequently Asked Questions

A

VX-JET allows you to adjust the ratio of direct sound to diffuse sound via a rear knob. Turning it out reduces reverb for distant listening, while turning it in enhances spatiality for close listening, optimizing the speaker's directivity without changing tone.

Is this answer helpful?

A

Yes, the speakers feature double terminals. You can remove the jumpers to connect separate cables for the woofer and mid/treble sections, reducing cross-talk and allowing for optimized cable choices per frequency range.

Is this answer helpful?

A

For optimal performance, a distance of 3 to 4 meters is considered neutral. Distances greater than 4 meters benefit from the VX-JET turned inward, while distances less than 3 meters should have the knob turned forward for better spatial imaging.

Is this answer helpful?

A

Play a known track with both speakers facing each other. If the bass sounds strong, the polarity is correct. If you invert one speaker and the bass drops significantly, the wiring was previously correct. A battery test can also verify driver movement direction.

Is this answer helpful?

A

Passive loudspeakers come with a 10-year warranty, while active electronics and other devices have a 2-year warranty. Registration within three months of purchase is required to validate this coverage.

Is this answer helpful?

A

Use only a soft, dry, lint-free cloth or a brush. Avoid alcohol, solvents, furniture polish, or wet cloths, as these can damage the finish or soften the rubber feet.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Innovative VX-JET technology allows real-time adjustment of directivity patterns for different room sizes.
  • Supports Bi-Wiring and Bi-Amping for enhanced signal separation and sound quality.
  • Built-in reversible fuses protect drivers from amplifier clipping damage.
  • Manufactured under strict quality and environmental regulations for durability.
  • Acoustic symmetry allows flexible placement options based on listener position.
VS

Disadvantages

  • Requires careful placement away from corners to avoid excessive bass reinforcement.
  • Bi-amping setup requires two separate amplifiers or complex cabling infrastructure.
  • Sensitivity to room acoustics means improper positioning can degrade sound significantly.
  • Cleaning must be done with specific materials to avoid damaging rubber feet or finishes.
  • Registration within three months is mandatory to activate the extended warranty coverage.
M: QW-35-FL

Product Specification

Type

Floor-standing speaker

Principle

4-way

Tweeter

1x ribbon

Midrange

1x 5"/127mm

Woofer

4x 9.80"/248.9mm

Frequency range

24Hz-50kHz

Power handling

400W RMS

Impedance

4Ω

Sensitivity

90dB

Dimensions (WxHxD)

18.11x66.14x18.11in

Weight per piece

335.10lbs

M: QW-35-FL

Product Description

Experience the Elac Concentro: Precision Audio for Your Home

The Elac Concentro represents a pinnacle in audio engineering, designed to deliver an immersive listening experience that adapts seamlessly to your unique environment. Built under strict quality and environmental standards, these speakers are not just components; they are instruments crafted to reveal the truest details of your music. Whether you are settling into a cozy corner or filling a large living room, the Elac Concentro ensures that every note is reproduced with clarity and depth.

One of the standout features of this system is the innovative VX-JET technology. This advanced mechanism allows users to fine-tune the relationship between direct sound and diffuse sound. By adjusting the knob on the rear baffle, you can control the speaker's directivity pattern without altering its fundamental tonality. If your listening position is far from the speakers, you can reduce reverberation for a clearer image. Conversely, if you sit closer, you can enhance the spatial feel of the room. This level of customization ensures that the acoustic performance remains optimal regardless of your room's specific dimensions or layout.

Proper placement is crucial for unlocking the full potential of the Elac Concentro. The manual emphasizes that the listener's position is acoustically equivalent to the speaker's position. Optimizing the distance between the speakers and the walls, as well as the seating area, prevents bass buildup and ensures a balanced soundstage. The system supports Bi-Wiring and Bi-Amping configurations, allowing audiophiles to separate the high/mid-range drivers from the woofers using distinct cables or amplifiers. This decoupling reduces cross-talk and allows for more precise tuning of the frequency response to match the room's acoustics.

Durability and ease of maintenance are also key considerations. The units are designed to be virtually maintenance-free, requiring only a soft, dry cloth for cleaning. They feature reversible fuses to protect against amplifier clipping, ensuring longevity even when driven at high volumes. With a robust build and a focus on user-friendly setup, the Elac Concentro stands ready to transform your home entertainment space into a professional-grade listening room.

M: QW-35-FL

© Copyright 2026 Manual.ly