Manual.ly Logo

Einhell GE-PH 2555A Manual

5.0 · 1 Ratings

PDF manual · 100 Pages

English

M: OA-GPT-54-NAN
page

/ 100

Loading...
12eec5aa689ae35a6884ab5b167ffd82d8ad page e
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the warning signs on the
equipment (see Fig. 17)
1. Warning!
2. Read the directions for use before operating the
equipment.
3. Sharp blades! Always keep hands and feet away
from the blades.
4. Wear eye protection and ear plugs!
5. Wear safety gloves!
6. Wear sturdy, non-slip footwear!
7. Very hot surface. Do not touch the hot exhaust
silencer, gearbox or cylinder. You may burn
yourself. These parts have become very hot
during operation and remain very hot over a long
period, even after the equipment has been
switched off.
8. Maintain a distance of at least 15 m from other
persons.
2. Layout and items supplied (Fig. 1-2)
1. Cutting blade
2. Cutting blade safety cover
3. Safety plate
4. Front handle
5. Choke lever
6. ON/OFF switch
7. Screwdriver
8. Locking knob for rotary handle
9. Fuel pump (primer)
10. Air filter cover
11. Starter handle
12. Rear handle
13. Throttle lever “release”
14. Throttle lever
15. Silencer cover
16. Tank for fuel mixture
17. Spark plug boot
18. Spark plug wrench
19. 8 mm / 10 mm open-ended spanner
20. Combined oil/petrol cylinder
21. Cutter rail cover
3. Proper use
Important. This hedge trimmer is suitable for cutting
hedges, bushes and shrubs.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
GB
14
Anleitung_GE_PH_2555_SPK7__ 11.02.14 10:23 Seite 14

Chat with your Einhell GE-PH 2555A manual using AI

Get instant AI answers from your Einhell GE-PH 2555A manual

Ask anything about the Einhell GE-PH 2555A. Answers come from this manual, with the pages they are based on.

GE-PH 2555A Maintenance Schedule

Remind me when maintenance is due
Yearly
Lubricate gearbox

Grease the gearbox annually before the start of the season at the lubrication nipple using about three strokes of machine grease.

Show in the manual (page 10)
Every 25 operating hours
Clean air filter

Check the air filter every 25 operating hours and clean it by tapping or blowing with compressed air if necessary.

Show in the manual (page 10)
First check after 10 operating hours
Inspect spark plug

Check the spark plug for dirt after 10 operating hours and clean with a copper wire brush if needed.

Show in the manual (page 10)
Every 50 operating hours
Service spark plug

After the initial check, service the spark plug every 50 operating hours.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend GE-PH 2555A?

Yes No
0
User Pic

Sara K.

7 months ago

Is this product good value for the price? I care about the price-performance ratio.

0
User Pic

Manual.ly

7 months ago

Yes, based on customer feedback the price-performance ratio is considered excellent. Reviewers specifically mention that the product delivers strong results for the cost. If you are looking for a balance between features and affordability, it appears to be a worthwhile option. For the best fit, just double-check the key specs (like size, compatibility, and intended use) to ensure it matches your needs, but overall the value-for-money impression is very positive.

M: OA-GPT-54-NAN
M: OA-GPT-54-NAN

Frequently Asked Questions

A

It is designed for trimming hedges, bushes, and shrubs. The 55 cm blade and petrol engine make it a practical choice for regular garden shaping and heavier cutting jobs.

Is this answer helpful?

A

The recommended mix is 40 parts unleaded petrol to 1 part two-stroke oil. The fuel should be fresh, and stored mix should not be kept for more than 90 days.

Is this answer helpful?

A

Yes. The rotary handle can be set to -90°, 0°, or +90°. This helps when trimming sides, tops, or harder-to-reach areas and improves overall control.

Is this answer helpful?

A

Set the machine on a level surface, use the choke, press the primer 10 times, switch it on, and pull the starter cord sharply. Let it warm up briefly before use.

Is this answer helpful?

A

Keep the blades oiled, clean the air filter regularly, check the spark plug, and lubricate the gearbox before the season. Regular cleaning also helps maintain performance.

Is this answer helpful?

A

No. The machine is intended for private garden work, not commercial, trade, or industrial use. Using it in those settings may void the warranty.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Strong 24.5 cm³ 2-stroke engine offers good cutting power for regular hedge and shrub maintenance.
  • 55 cm blade length helps cover more area quickly, improving efficiency on longer hedge sections.
  • Rotating handle positions improve comfort and control when working at different angles or heights.
  • Hardened steel blades and clear maintenance steps support long-term use and easier upkeep.
VS

Disadvantages

  • High noise level means hearing protection is essential and the tool is less suitable for noise-sensitive areas.
  • Petrol operation requires fuel mixing, storage care, and more maintenance than electric alternatives.
  • Weight of 5.4 kg may feel tiring during extended overhead or side trimming sessions.
  • Engine setup and carburetor adjustments are best left to authorized service, limiting DIY tuning.
M: OA-GPT-54-NAN

Product Specification

Type

Hedge Trimmer

Power

850W, 0.85hp, 1.49in^3, 2-Stroke

Cutting Length

21.65in

Weight

12.01lb

M: OA-GPT-54-NAN

Product Description

Einhell GE-PH 2555A Petrol Hedge Trimmer

The Einhell GE-PH 2555A Petrol Hedge Trimmer is built for gardeners who want dependable cutting power without being tied to a cable. With a 24.5 cm³ two-stroke engine delivering up to 0.85 kW (1.15 hp), it is designed to handle routine hedge shaping, shrub trimming, and seasonal garden cleanup with steady performance. If you are looking for practical guidance, the Einhell GE-PH 2555A Petrol Hedge Trimmer Manual highlights how this machine balances mobility, reach, and straightforward operation.

One of the standout features is the 55 cm cutting length, which gives you a generous working range for longer hedge runs. The trimmer also handles branches up to 19 mm thick, making it suitable for more than just light touch-ups. Its rotating rear handle can be adjusted to -90°, 0°, or +90°, which is especially useful when trimming vertical sides, angled tops, or awkward sections above shoulder height. That flexibility makes the tool feel more adaptable in real-world garden work.

Starting the engine is handled through a familiar petrol routine: primer pump, choke, pull-start, and warm-up. Once running, the machine is intended for outdoor use in well-ventilated areas only, and the instructions emphasize proper fuel mixing at a 40:1 petrol-to-oil ratio. This keeps the engine protected and supports reliable performance over time. The hedge trimmer also includes practical maintenance points such as air filter cleaning, spark plug checks, gearbox lubrication, and blade care, helping extend its service life.

In use, the GE-PH 2555A is aimed at controlled, efficient cutting. Wide sweeping motions work best for dense growth, while guided side cutting helps maintain even hedge lines. The blade system is made from hardened steel, so normal use should not require frequent sharpening, provided it is kept clean and properly oiled. Like many petrol hedge trimmers, it is not the quietest option, but its portable design and strong output make it a solid choice for larger or more demanding garden tasks.

Notes

  • Best suited for hedges, bushes, and shrubs
  • Use only the recommended fuel mix
  • Wear hearing, eye, and hand protection
  • Keep the blade covered during storage and transport
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly