Manual.ly Logo

Einhell GC-WW 6538 Manual

0.0 · 0 Ratings

PDF manual · 76 Pages

English

M: OA-GPT-54-NAN
page

/ 76

Loading...
345ab919bec3a9cf624b1535dde36f13fb3a page 6
D
- 6 -
matisch ab und nach dem Abkühlen schaltet
sich das Gerät wieder selbstständig ein.
6. Bedienung
•
Das Gerät auf festen, ebenen und waagrech-
ten Standort aufstellen.
•
Pumpengehäuse über die Wassereinfüll-
schraube (5) mit Wasser auffüllen. Ein
Auffüllen der Saugleitung beschleunigt den
Ansaugvorgang.
•
Alle Absperrvorrichtungen in der Druckleitung
(Spritzdüse, Ventile usw.) müssen beim An-
saugen vollständig geöffnet sein, damit jeg-
liche Luft aus der Ansaugleitung entweichen
kann.
•
Netzleitung anschließen.
•
Gerät am Netzschalter (7) einschalten – das
Ansaugen kann bei max. Ansaughöhe bis zu
5 Minuten dauern.
•
Das Gerät schaltet bei Erreichen des Ab-
schaltdruckes von 3 bar ab.
•
Nach Abfall des Druckes durch Wasserver-
brauch schaltet das Gerät selbsttätig ein (Ein-
schaltdruck ca. 1,5 bar).
•
Nach Beendigung der Arbeit Gerät am Netz-
schalter (7) ausschalten.
7. Austausch der
Netzanschlussleitung
Gefahr!
Wenn die Netzanschlussleitung dieses Gerätes
beschädigt wird, muss sie durch den Hersteller
oder seinen Kundendienst oder eine ähnlich qua-
lifi zierte Person ersetzt werden, um Gefährdun-
gen zu vermeiden.
8. Reinigung, Wartung und
Ersatzteilbestellung
Das Gerät ist weitgehend wartungsfrei. Für eine
lange Lebensdauer empfehlen wir jedoch eine
regelmäßige Kontrolle und Pfl ege.
Gefahr!
Vor jeder Wartung ist das Gerät spannungsfrei zu
schalten, hierzu ziehen Sie den Netzstecker der
Pumpe aus der Steckdose.
8.1 Wartung
•
Bei eventueller Verstopfung des Gerätes
schließen Sie die Druckleitung an die Was-
serleitung an und nehmen den Saugschlauch
ab. Öffnen Sie die Wasserleitung. Schalten
Sie das Gerät mehrmals für ca. zwei Sekun-
den ein. Auf diese Weise können Verstop-
fungen in den häufigsten Fällen beseitigt
werden.
•
Im Druckbehälter befindet sich ein dehnbarer
Wassersack sowie ein Luftraum, dessen
Druck ca. 1,5 bar max. betragen soll. Wenn
nun Wasser in den Wassersack gepumpt
wird, so dehnt sich dieser aus und erhöht den
Druck im Luftraum bis zum Abschaltdruck.
Bei zu geringem Luftdruck sollte dieser wie-
der erhöht werden. Dazu ist der Kunststoff-
deckel am Behälter abzuschrauben und mit
Reifenfüllmesser über das Ventil der fehlende
Druck zu ergänzen.
Achtung: Vorher Wassersack komplett
entleeren über die Wasserablassschrau-
be (2).
•
Im Geräteinneren befinden sich keine weite-
ren zu wartenden Teile.
8.2 Ersatzteilbestellung:
Bei der Ersatzteilbestellung sollten folgende An-
gaben gemacht werden;
•
Typ des Gerätes
•
Artikelnummer des Gerätes
•
Ident-Nummer des Gerätes
•
Ersatzteilnummer des erforderlichen Ersatz-
teils
Aktuelle Preise und Infos fi nden Sie unter
www.isc-gmbh.info
Anl_GC_WW_6538_SPK1.indb 6Anl_GC_WW_6538_SPK1.indb 6 31.07.14 10:2631.07.14 10:26

Chat with your Einhell GC-WW 6538 manual using AI

Get instant AI answers from your Einhell GC-WW 6538 manual

Ask anything about the Einhell GC-WW 6538. Answers come from this manual, with the pages they are based on.

GC-WW 6538 Maintenance Schedule

Remind me when maintenance is due
Yearly
Check and adjust air pressure in pressure tank

Unscrew plastic lid and check air pressure; top up to approx. 1.5 bar using a tyre pump if too low after emptying water bag.

As needed
Clean clogged equipment

Connect discharge line to water, remove suction hose, open water valve, and switch on for two seconds several times to clear blockages.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend GC-WW 6538?

Yes No

Frequently Asked Questions

A

It is designed for domestic water supply tasks such as garden irrigation, lawn sprinklers, and drawing service water from rain barrels, cisterns, wells, or ponds. It works best with clear water and light service water.

Is this answer helpful?

A

No. It is not intended for drinking water. The unit is meant for clear water, rainwater, and light service water only. Using it for potable water is outside the intended application.

Is this answer helpful?

A

The maximum suction height is 8 meters. For best results, the suction line should be installed correctly, kept airtight, and fitted with a suitable valve or non-return valve.

Is this answer helpful?

A

Yes. The built-in pressure switch starts the pump when pressure drops to about 1.5 bar and stops it at around 3 bar. This helps maintain consistent water delivery without constant manual control.

Is this answer helpful?

A

A suction hose with spiral reinforcement, a non-return valve or suction valve, and a pre-filter are strongly recommended. These parts help reduce priming time and protect the pump from debris and sand.

Is this answer helpful?

A

Drain it completely, flush it with water if needed, and store it in a dry, frost-free place. Frost can damage the pump, so seasonal draining is important before long periods of non-use.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Strong 650 W motor for routine garden and household water tasks.
  • Automatic pressure control makes operation simple and convenient.
  • 20 L tank helps maintain steadier water pressure during use.
  • Suitable for rainwater, wells, ponds, and other service-water sources.
VS

Disadvantages

  • Not suitable for drinking water or aggressive liquids.
  • Requires careful priming and airtight hose connections.
  • Performance drops with smaller pressure hoses.
  • Needs protection from sand, debris, and frost to avoid damage.
M: OA-GPT-54-NAN

Product Specification

Power

650W

Flow rate

1,003.86 gal/h

Delivery height

118.11 ft

Suction height

26.25 ft

Pressure

52.21 psi

Pressure connection

1"

Suction connection

1"

Tank capacity

5.28 gal

Special features

incl. Tank

Cable length

55.12 in

Weight

23.10 lb

M: OA-GPT-54-NAN

Product Description

Einhell GC-WW 6538: Compact Power for Reliable Water Supply

The Einhell GC-WW 6538 Electric domestic waterworks is built for practical everyday water management around the home and garden. It is designed to move clear water efficiently for tasks like watering lawns, feeding sprinklers, filling irrigation systems, and drawing service water from rain barrels, cisterns, wells, ponds, or streams. In a blog-style sense, it stands out as a straightforward solution for anyone who wants a steady water source without relying on the main supply for every outdoor job.

With a 650-watt motor and a maximum pumping rate of 3,800 liters per hour, this model offers a balanced mix of efficiency and simplicity. The unit can reach a delivery head of up to 36 meters and a suction height of up to 8 meters, which makes it suitable for many domestic water transfer tasks. A 20-liter tank helps stabilize pressure, while the built-in pressure switch automatically starts and stops the system as water is used. That means less manual monitoring and a more convenient daily routine.

The Einhell GC-WW 6538 Electric domestic waterworks Manual also highlights helpful details for setup and care. It recommends a suction hose with a non-return valve and, ideally, a pre-filter to reduce priming time and protect the pump from sand or debris. This is especially useful when drawing water from natural or open sources. The appliance is intended for clear water, rainwater, and light service water only, and it should not be used with drinking water, aggressive liquids, or fluids containing abrasive particles.

Another strong point is safety. The integrated thermal protection helps prevent overload and allows the motor to cool down automatically before restarting. Combined with its IPX4 protection rating, the unit is well suited to typical outdoor use when installed correctly. The pressure settings are also practical: the pump switches on at around 1.5 bar and switches off at around 3 bar, creating a consistent water flow for connected applications.

Overall, this domestic waterworks is a useful pick for homeowners who want dependable pressure, simple operation, and a compact footprint. It is not a heavy industrial machine, but for garden irrigation and household water transfer, it delivers exactly what many users need: stable performance with manageable maintenance.

Notes

  • Prime the pump housing with water before first use.
  • Keep suction and pressure lines airtight for best results.
  • Store the unit dry and frost-free after seasonal use.
  • Clean filters regularly to maintain flow and reduce wear.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly