Manual.ly Logo

Edifier TWS NB2 Pro Manual

0.0 · 0 Ratings

PDF manual · 7 Pages

English

M: QW-35-FL
page

/ 7

Loading...
c41cde7a96af64473921fe0e8f8e42cdff06 page 1
EN
1. Product Description and Accessories
2. Power on/o
3. Charge
4. User guide
5. FAQs
6. Maintenance
Input: 5V 60mA (earbuds)
5V 1A (charging case)
Note:
•
There are different size of ear tips attached in the package, please select the
suitable ones to wear.
•
Images are for illustrative purposes only and may differ from the actual
product.
Warning: The rechargeable batteries that provide power for this product must
be disposed properly for recycling. Do not dispose of batteries in fire to prevent
an explosion.
• If it is not used for long periods of time, please charge the product with
lithium battery every three months.
• Keep the product away from humid places to avoid affecting internal circuit.
Do not use the product during intense exercise or with much sweat to
prevent sweat from dropping into the product to make damage.
• Do not put the product in places exposed to sun or with high temperature.
High temperature will shorten service life of electronic components, damage
battery and make plastic components deformed.
• Do not put the product in cold places to avoid damaging internal circuit
board.
• Do not dismantle the product. Non-professional personnel may damage the
product.
• Do not drop, strongly vibrate, strike the product with hard object to avoid
damaging internal circuit.
• Do not use drastic chemicals or cleaner to clean the product.
• Do not use sharp objects to scratch product surface to avoid damaging shell
and affecting facade.
When charging the charging case, the indicator is o.
• Please ensure the charging case is correctly connected with power source.
No sound
• Check if the earbuds are operating.
• Check if the earbuds volume are at an appropriate level.
• Check if the earbuds are correctly connected with mobile phone.
• Check if the earbuds are operating within a normal working range.
The call quality of the earbuds are not good.
• Check if mobile phone is in an area with strong signal.
• Please ensure the earbuds are within effective distance (10m) and no
obstacle between the earbuds and mobile phone.
When playing music, cannot control pause/play/next track via the earbuds.
• Please ensure the paired device support AVRCP (Audio/Video Remote
Control Profile) profile.
The tapping function is too sensitive or not sensitive.
• Please ensure you are tapping in the effective tap zone with a moderate
intensity or at an appropriate angle. You can also adjust to a desired tapping
sensitivity via the EDIFIER CONNECT APP.
After one earbud alone is connected to another mobile phone, there is no
sound from the other earbud when used again.
• When one earbud alone is connected to another mobile phone, the
interconnection between the left and right earbuds may have been
disconnected. To restore the two earbuds mode, double click the pairing
button on the case to resume interconnection between the left and right
earbuds. Then try again.
There is a delay problem when playing game.
• Please triple click the left earbud to switch to game mode and then start
playing game.
In-ear detection function is not sensitive or too sensitive.
• To ensure every wearing of the earbuds by user can be recognized, the
recognition of in-ear detection have been slightly raised. If not used, please
place the earbuds back into the case for charging and storage; it is better
not to place the earbuds alone in the pocket or on the desk for long periods
of time, so as to avoid interference with the in-ear detection function or
missing of the earbuds. You can also set the automatic in-ear detection
function to other functions or close it via the EDIFIER CONNECT APP.
True Wireless Earbuds with Active Noise Cancellation
www.edifier.com
TWS NB2 Pro
● The earbuds will power on
when the case is opened.
● The earbuds will power o
when the case is closed.
Green light is steady lit once
● Bluetooth connection
•
Place the earbuds in the case, and press
and hold the button on the case for
around 3 seconds to enter Bluetooth pairing.
•
Set mobile phone to search for and
connect to "EDIFIER TWS NB2 Pro".
•
Bluetooth pairing: the white
and green lights flash rapidly.
•
After pairing is successful, the
green light will flash slowly.
Tap zone
Button
Accessories:
Ear tips x 3 pairs, Storage bag x 1, Charging cable x 1
● Interconnection of the left and right earbuds/clear pairing
records
Place the earbuds in the case, and double click the button on the case (the white
light flashing rapidly) to clear pairing records and enter the TWS pairing of the left
and right earbuds. When successful, the earbuds will automatically enter Bluetooth
pairing state, and the white and green lights will flash rapidly.
● Functional operation
Note:
•
Noise reduction mode switch: noise reduction mode(effective when both
earbuds are used), ambient sound mode, and normal mode.
•
Sound effect mode switch: standard mode, spatial audio mode, and game mode.
Accept/end a call:
double click
Noise reduction mode switch:
double click
Sound effect mode switch:
triple click
Accept/end a call:
double click
Pause/play:
double click
Next track:
triple click
Tap zone
● In-ear detection function
•
Music control: Music will be played/paused when one earbud is inserted or
removed.
•
Noise reduction control: In noise reduction mode, the noise reduction will be
enabled when both earbuds are inserted, and will be disabled when one earbud
is removed.
•
You can also set or close the in-ear detection function via the EDIFIER CONNECT
APP.
● Charge the earbuds
•
Place the earbuds in the case and close the case for charging.
● Charge the charging case
•
Connect the included charging cable to the case for charging.
•
Indicator steady lit = charging
Indicator off = fully charged
● Battery level indicator on the charging case
•
Open/close the case to show the case’s battery level;
if indicator flashes three times: full battery level
if indicator flashes twice: medium battery level
if indicator flashes once: low battery level
EDIFIER TWS NB2 Pro
• Battery level indicator (next to the
charging port)
Model: EDF200026
Edif ier International Limited
P.O. Box 6264
General Post Off ice
Hong Kong
www.edif ier.com
2021 Edif ier
International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without
prior notice.
Products of EDIFIER will be customized for different applications. Pictures
and illustrations shown on this manual may be slightly different from
actual product. If any difference is found, the actual product prevails.

Chat with your Edifier TWS NB2 Pro manual using AI

Get instant AI answers from your Edifier TWS NB2 Pro manual

Ask anything about the Edifier TWS NB2 Pro. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend TWS NB2 Pro?

Yes No

Frequently Asked Questions

A

Place the earbuds in the case, hold the button for three seconds until white and green lights flash rapidly. Search for 'EDIFIER TWS NB2 Pro' on your phone and connect.

Is this answer helpful?

A

If interconnection breaks, place both earbuds in the case and double-click the pairing button to restore the link between left and right units.

Is this answer helpful?

A

Triple-click the left earbud to switch to Game Mode, which minimizes audio delay for a better gaming experience.

Is this answer helpful?

A

Yes, you can adjust the tapping sensitivity directly through the EDIFIER CONNECT application on your smartphone.

Is this answer helpful?

A

Music plays when inserted and pauses when removed. This function can be adjusted or disabled via the companion app settings.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Active Noise Cancellation effectively blocks external noise
  • Dedicated game mode reduces audio latency significantly
  • Intuitive touch controls for calls and music playback
  • In-ear detection automatically pauses music when removed
  • Compatible with EDIFIER CONNECT app for customization
VS

Disadvantages

  • Touch sensitivity may require adjustment via the app
  • Interconnection between earbuds can disconnect if one pairs separately
  • Battery life may vary depending on ANC usage intensity
  • Charging case indicator turns off during charging process
  • Requires specific AVRCP profile support for track skipping
M: QW-35-FL

Product Specification

Type

In-Ear Headphones

Form Factor

True Wireless, Ear Hook-Free

Principle

Closed-Back

Microphone

Integrated

Wireless

Bluetooth 5.0, AAC

Controls

Touch Control, Auto-Pause/Play

Battery Life

7h (with ANC), 9h (without ANC), 25h (with Charging Case)

Battery

USB-C Charging Port, Charging Case (500mAh), 1h Charging Time, Fast Charging (15min for 2h Usage)

Frequency Range

20Hz-20kHz

Impedance

24 Ohm

Sensitivity

94dB

Drivers

10mm

Device Features

Active Noise Cancellation (ANC), Ambient Mode, Water Resistant (IP54)

Weight

0.18oz (per earbud)

M: QW-35-FL

Product Description

Discover the Edifier TWS NB2 Pro

The Edifier TWS NB2 Pro represents a significant leap in true wireless audio technology, designed for users who demand superior sound quality and advanced noise cancellation. These earbuds feature Active Noise Cancellation (ANC) that effectively filters out ambient distractions, allowing you to immerse yourself in your music or calls without interruption. Whether you are commuting, working in a busy office, or relaxing at home, the NB2 Pro adapts to your environment with its intelligent noise reduction modes.

Designed with user comfort in mind, the package includes three pairs of ear tips in different sizes to ensure a perfect fit for every ear shape. The earbuds automatically power on when removed from the charging case and power off when placed back inside, streamlining your daily routine. A green indicator light confirms successful pairing, while the case displays battery levels through flashing lights, ensuring you never run out of power unexpectedly.

Connectivity is seamless via Bluetooth, supporting stable connections up to ten meters. The earbuds support multiple sound effect modes including Standard, Spatial Audio, and a dedicated Game Mode which reduces latency for an enhanced gaming experience. You can control playback, answer calls, and switch modes using intuitive touch controls on the earbuds themselves. For further customization, the EDIFIER CONNECT app allows you to adjust tap sensitivity and manage the in-ear detection function.

Key Features Overview

This product combines style with substance, offering a robust build that withstands daily use while maintaining a sleek aesthetic. The charging case supports fast charging capabilities, providing ample power for extended listening sessions. With features like automatic in-ear detection, the music pauses instantly when you remove an earbud, adding a layer of convenience to your workflow.

Important Notes

  • Always dispose of rechargeable batteries properly for recycling.
  • Avoid exposing the product to extreme temperatures or moisture.
  • Do not attempt to disassemble the device as it may cause permanent damage.
  • Ensure your paired device supports AVRCP profiles for full media control.
M: QW-35-FL

© Copyright 2026 Manual.ly