Manual.ly Logo

Eden 114 Manual

5.0 · 1 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-54-NAN
page

/ 2

Loading...
b62283e95f6f47d0ecd55dfee6334b26797c page 1
REINIGUNG
Trennen Sie zunächst sämtliche Unterwassergeräte von der Stromquelle bevor Sie irgendeine Arbeit in
Angriff nehmen. Entfernen Sie das Motorgehäuse (s. Abb. 3) und nehmen Sie den Vorfilter heraus. Ziehen
Sie den Rotor aus seiner Halterung. Waschen Sie alle Teile sorgfältig mit einer nicht-metallischen Bürste.
Falls erforderlich, entfernen Sie eventuelle Kalkablagerungen, indem Sie die Pumpenteile für einige
Stunden in Essig oder Zitronensaft legen. Setzen Sie die Pumpe zusammen indem Sie alle Teile wieder
an ihren richtigen Platz bringen.
AUSWECHSELN DER BUCHSEN
Sollten die Laufgeräusche der Pumpe nach längerer Laufzeit zu laut werden, wechseln Sie bitte die
Buchsen wie folgt aus: Öffnen Sie die Pumpe und entfernen Sie die alten Buchsen (s. Abb. 4) Setzen Sie
die neuen, bei Ihrem Fachhändler erhältlichen Buchsen ein. Achten Sie darauf, daß die Führungslöcher
nach innen zeigen und drücken Sie sie an, bis sie an dem dafür vorgesehenen Platz festsitzen (s. Abb. 4).
GARANTIE
Für dieses Produkt gewähren wir ab dem Kaufdatum eine 24 monatige Garantie auf Material
und werkseitige Montage. Das Gerät wurden nach den IEC EN 60 335-2-41 Sicherheitsvorschriften
konstruiert, nach sorgfältigen Arbeitsmethoden und unter Verwendung von Materialien höchster
Qualität hergestellt. Damit ist eine dauerhaft hohe Zuverlässigkeit und Leistungsstärke garantiert.
Die Garantie erstreckt sich nicht auf unsachgemäße Handhabung, Beschädigung aller Art und
technische Veränderungen. Insbesondere für verschmutzte Geräte wird kein Ersatz geleistet.
Die Garantie wird gewährt, wenn das Gerät in allen Teilen vollständig und zusammen mit der
Empfangsbestätigung oder Rechnung eingereicht wird. Im Garantiefall schicken Sie das Gerät
zusammen mit dieser Urkunde und dem Rechnungsbeleg an Ihren Händler zurück. Bei gerechtfer-
tigtem Garantieanspruch behalten wir uns vor, das Gerät zu reparieren oder zu ersetzen. Ansprüche
und Folgeschäden, die aus unsachgemäßem Gebrauch, mangelnder Pflege oder Missachtung der
Sicherheitsvorschriften entstehen, sind von der Garantie ausgenommen. Verschleißschäden an
Verschleißteilen (z. B. Rotor) fallen nicht unter unseren Garantieschutz.
ACHTUNG !
Dieses Gerät ist nicht dafür bestimmt, durch Personen (einschließlich Kinder) mit eingeschränkten
physischen, sensorischen oder geistigen Fähigkeiten oder mangels Erfahrung und/oder mangels
Wissen benutzt zu werden, es sei denn, sie werden durch eine für Sicherheit zuständige Person
beaufsichtigt oder erhielten von ihr Anweisungen, um sicherzustellen, daß sie nicht mit dem
Gerät spielen.
WICHTIGE GEBRAUCHSBESTIMMUNGEN
♦
Nur für den Einsatz in Aquarien:
Die Pumpen 112 - 114 - 126 - 128 und 130 haben ein 2-poliges Kabel und dürfen nur in
Aquarien eingesetz werden:
♦
Nur für den Einsatz im Innenbereich:
Die Pumpen 112G - 114G - 126G - 128G und 130G mit 3-poligem Kabel von 1,5 bis 3 Meter
Länge sind nur für den Einsatz im Innenbereich geeignet.
SICHERHEITSVORSCHRIFTEN
♦
Prüfen Sie vor Anschluß des Gerätes, ob die Betriebsspannung (siehe Aufdruck) mit der
Netzspannung übereinstimmt.
♦
Betrieb nur mit installiertem Fehlerstromschutzschalter (max. = 0.03 A Empfindlichkeit!).
♦
Die Pumpen 112G - 114G - 126G - 128G und 130G dürfen nur an einer Steckdose mit
Schutzleiterkontakt angeschlossen werden.
♦
Vor jeglichem Wasserkontakt und Eintauchen der Hände sind alle im Wasser befindlichen
Geräte vom Netz zu trennen.
♦
Das Netzkabel dieses Gerätes kann weder repariert noch ausgetauscht werden; bei Beschädigung
muß das Gerät durch ein neues ersetzt werden.
♦
Geräte mit dem aufgedruckten Symbol
muß das Gerät durch ein neues ersetzt werden.
muß das Gerät durch ein neues ersetzt werden.
muß das Gerät durch ein neues ersetzt werden.
sind ausschließlich für den Gebrauch in Zimmern
und innenräumen.
♦
Vorsicht! Der Betrieb in Schwimmbecken oder Badewannen ist nicht gestattet.
♦
Die Pumpe darf nur für Flüssigkeiten bis zu einer Temperatur von 35°C verwendet werden.
♦
Bitte bewahren Sie diese Vorshriften für eine eventuelle spätere Kontrolle sorgfältig auf.
NEUER ROTOR “WHIRLER”
Um höchste Sicherheit und Laufruhe zu bieten wurde diese Pumpe mit einem einzigartigen neuen
Rotorsystem ausgestattet. Die Welle ist in das Laufrad integriert und dreht sich in zwei selbstschmirenden
Spezialbuchsen um der Abnutzung entegenzuwirken und mögliche Vibrationen zu absorbieren.
Bringen Sie die Saugnäpfe an die Pumpe an (s. Abb. 1)
REGULIERUNG
Die Pumpenleistung ist in 6 Stufen regulierbar. Um die entsprechende Pumpenleistung einzustellen,
drehen Sie den Kontrollhebel gegen min. und max. (s. Abb. 2) bis die Anzeige über die gewünschte
Fördermenge auf dem Display erscheint.
WARTUNG
Der Motor ist vollständig versigelt, durch einen Selbstschutz gegen Überhitzen abgesichert und weit-
gehend wartungsfrei. Bei Störungen zunächst die Stromzufuhr, die Anschlüsse und den Schutzschalter
der elektrischen Anlage kontrollieren, Falls alles in Ordnung ist, muß die Pumpe gereiningt werden.
Waschen Sie in regelmäßigen Abständen den Filter, den Rotor und das Pumpengehäuse (s. Abb. 3) um
Verunreinigungen und Kalkablagerungen zu vermeiden.
NETTOYAGE
Avant de mettre vos mains dans l’eau, débranchez tous les appareils électriques immergés. Deboiter le
couvercle de la pompe et enlever la crépine avec le système de régulation du débit (fig. 3). Sortir la
turbine de son emplacement. Rincer le tout sous l’eau claire à l’aide d’une brosse non métallique.
Les dépôts calcaires qui résistent peuvent être enlevés en laissant l’unité immergée dans du vinaigre ou
du jus de citron pendant quelque heures.
REMPLACEMENT DES PALIERS DE LA TURBINE
Si nécessaire (quand par example la pompe devient trop bruyante) ouvrir
la pompe et enlever les paliers (fig. 4) Emboiter les nouveaux paliers dans les ergots
correspondants (fig. 5).
GARANTIE
Le matériel et l’assemblage de cette unité, sont garanti pendant 24 mois de la date d’achat. L’unité
a été fabriquée en conformité aux Normes de Sécurité IEC EN 60 335-2-41 avec les technologies les
plus modernes en utilisant des matériaux de qualité pour garantir la puissance, la fiabilité et une
longue satisfaction. Cette garantie ne couvre pas les défauts dus à altération, négligence, mauvaise
utilisation, modifications techniques ou le mauvais entretien. La garantie sera reconnue unique-
ment si l’unité est retournée dans son intégrité, accompagnée par la preuve ou facture d’achat.
Pour utiliser cette garantie retourner l’unité au fournisseur avec ce bon de garantie complété et
la preuve d’achat. Nous nous réservons le droit de remplacer ou réparer les unités retournées sous
garantie. Cette garantie ne couvre pas les défauts causés par emploi non convenable, par négligen-
ce ou la non-observance des normes de sécurité. Les pièces (ex. la turbine) sujets à l’usure ne sont
pas couvertes par cette garantie.
ATTENTION !
Cet appareil n’est pas destine à être utilisé par des personnes (enfants et compris) aux capacités
physiques, sensorielles ou intellectuelles limitées ou d’expérience ou de connaissance, à moins
qu’elles ne se trouvent sous la surveillance d’une personne responsable de la sécurité ou obéissent
à ses recommandations sur la manière d’utiliser l’appareil.
Veillez surveiller les enfants afin de pouvoir être certain qu’ils ne jouent pas avec l’appareil.
TRéS IMPORTANT:
♦
L’usage des pompes 112 - 114 - 126 - 128 et 130 avec cables bipolaires, doit être strictement
réservé aux aquariums.
♦
Les pompes 112G - 114G - 126G - 128G et 130G avec cables tripolaires de 1,5 ou 3 mètres
doivent être réservées à un usage intérieur (petites fontaines etc.).
PRECAUTIONS D’EMPLOI
♦
Vérifier que la tension de votre circuit corresponde bien au voltage indiqué sur l’etiquette.
♦
A’ n’utiliser qu’avec un disjoncteur différentiel = 0.03A.
♦
Si l’appareil est muni d’un cable avec mise à terre, il faut le brancher à une prise reliée à la
terre.
♦
Debrancher toutes les installations électriques avant de mettre vos mains dans l’eau.
♦
Le cable de cet appareil ne peut être ni réparé ni remplacé. En cas de dommage il faut remplacer
l’unité complète.
♦
Si l’unité porte ly symbole symbole elle doit être utilisée seulement à l’interieur.
♦
Avertissement: à ne pas utiliser dans piscines ou salles de bain.
♦
Cet appareil est à utiliser dans des eaux à température de 35°C maxi.
♦
Conservez ces instructions afin de pouvoir vous y reporter ultérieurement.
“WHIRLER”
Pour garantir son caractère particulièrement fiable et silencieux, cette pompe est equipée d’un nouveau
système de turbine. L’axe tourne en restant solidaire de l’aiment gràce à des paliers en matériau spécifi-
que, autolubrifiant et resistant à l’usure, qui assure aussi l’absorbption des vibrations.
Fixer les ventouses sur la pompe comme indiqué en fig. 1.
REGULATION DU DEBIT
La pompe est equipée d’un robinet de régulation de débit à six positions, avec indica-
teur du débit. Tournez le robinet vers min. pour diminuer le débit ou vers max. pour
l’augmenter, jusqu’à ce que la valeur désirée du debit apparaisse dans la fenêtre
d’indication (fig. 2).
ENTRETIEN
Le moteur est entièrement encapsulé et protegé contre les surchauffes, il n’a pas besoin d’entretien. Si
l’unité ne fonctionne pas, vérifier avant tout le branchement électrique, le disjoncteur etc., si tout est
parfait l’appareil devrait simplement être à nettoyér!
Il est recommandé de nettoyer régulièrement la crépine, la turbine et la chambre à eau (fig. 3) en
prenant soin d’éliminer tous les dépôts.
Regular cleaning of the strainer, the rotor/impeller and the pump chamber (fig. 3) is recommended to
remove any debris and lime-scale, which could block the unit.
CLEANING
Prior to any work on the unit, disconnect all electrical equipment from the mains.
Remove the pump cover (fig. 3) and take off the strainer. Pull the rotor from its location. Carefully rinse
all components under running water cleaning with a non-metallic brush such as toothbrush. If neces-
sary remove lime-scale by leaving the components immersed in vinegar or lemon juice for few hours.
Reassemble the unit so that all components are placed in their original position.
REPLACING THE BUSHINGS
If the pump becomes too noisy after prolonged running, replace the bushings as follows.
Open the pump and remove old bushings (fig. 4). Replace with new bushings from your dealer just by
pushing them with your thumb until they stop in their seats. Take care that holes for shaft are oriented
toward the inside (fig. 5).
WARRANTY
With this product we offer you a guarantee of 24 months from the date of purchase on materials
and manufacturing faults. This unit has been manufactured according to the IEC EN 60 335-2-41
Safety Standards, using high quality materials and the most accurate manufacturing processes to
grant the highest satisfaction and long lasting. This guarantee does not cover any mishandling,
damage or technical modification to the unit. No replacement will be given for units that have
not been properly maintained. The guarantee will be honoured only if the unit is returned in its
whole and together with the receipt or proof of purchase. In case of returning under guarantee,
please return it accompanied by this certificate of guarantee and the proof of purchase to your
supplier. We do reserve the right to repair or replace the unit. The guarantee does not cover cases of
damages that may result from misuse, tampering and negligence or from not observing of the Safety
Warnings. This guarantee does not cover parts subjected to natural wearing and tear (i.e. rotors).
VERY IMPORTANT NOTICE !
This equipment is not intended for use by persons (including children) with limited physical, sen-
sory or mental abilities or for persons with no experience or knowledge unless they are supervised
by a person responsible for safety or unless they have received from such a person instructions
on how to use the equipment. Children should be supervised to ensure that they do not play with
the equipment.
VERY IMPORTANT - RESTRICTION ON USE OF PUMPS
♦
Pumps 112 - 114 - 126 - 128 and 130 have a 2-core cable and must be used only indoor and in aquariums.
♦
Pumps 112G - 114G - 126G - 128G and 130G having 3-core 1.5 or 3 metres long cable, are only for indoor use.
♦
Only pumps having 10 mts long cable can be used outdoor.
SAFETY INSTRUCTIONS
♦
Important:
♦
Consult a qualified electrician if you have any doubts about wiring this product to the mains supply.
♦
Check that the voltage shown on the label of the unit corresponds to the voltage of the mains supply.
♦
The models 112G - 114G - 126G - 128G and 130G must be connected to an earthed socket.
♦
Only pumps fitted with 10 metres of cable are intended for outdoor use. These should be connected
to the mains by either a weatherproof cable connector, or connected to the fixed wiring of the mains
system by means other than a conventional plug and socket.
♦
Connect the unit only to power supplies with residual current circuit breaker (RCCD) with sensitivity
of 30 mA.
♦
The models fitted with 1.5 - 3 mtr cable supplied with an earthed plug and must be connected to an
earthed socket only.
♦
Always disconnect all electrical appliances from the mains before placing your hands in the water.
♦
The line cord cannot be replaced or repaired. Should the cord become damaged the appliance must
be discarded.
♦
Units marked with on the label are for indoor use only.
♦
This unit must not be used in swimming pools or bathrooms.
♦
This appliance has been designed for use in fluids up to 35°C.
♦
It is necessary to conform to the regulations of the local electricity authority, which will state that
“cable buried under the ground must be protected by armoured conduit”.
FOR UK ONLY
The leads of this unit must be connected as follows: Blue or Black to Neutral or Black-coloured terminal.
Brown to Live or Red-coloured terminal. Earthed units have a Green or Green/Yellow earth wire and this
must be connected to the Earth terminal
on the plug or connector.
NEW STYLE “WHIRLER” ROTOR
For superior reliability and quietness this unit is equipped with a unique new rotor system. Unlike other
products the shaft is integral part of the impeller and rotates in two special self-lubricating bushes to
withstand wear and tear and absorb possible vibrations.
Mount the rubber feet on the pump as per fig. 1.
ADJUSTING THE FLOW
The pump has a 6-position flow control dial. Rotate the valve toward min. or max. indicator (fig. 2) until
the desired flow appears on the display.
MAINTENANCE
The motor is fully encapsulated and self protected against overheating and needs no particular care. If
the pump fails to work, first check the electrical supply, connections, circuit breaker etc. If these are
correct, the pump needs to be cleaned.
EDEN S.R.L.
Via delle Industrie, 16
36050 - Cartigliano - VI - Italy
Tel. +39 0424 590866 - Fax +39 0424 827342
www.edensrl.com • e-mail: [email protected]
Warranty
Garantie
Garantie
Garanzia
Garantia
COD. 3303-0100_REV. 03
Entsorgung:
(nach RL2002/96/EG)
Gerät darf nicht dem normalen Hausmüll
beigefügt werden, sondern muss fach-
gerecht entsorgt werden.
Wichtig für Deutschland: Gerät über Ihre
kommunale Entsorgungsstelle entsorgen.
Gestion des d
é
ch
e
ts:
(directive RL2002/96/EG)
Cet appareil ne doit pas être jeté dans les
poubelles domestiques mais dans les con-
tainers spécialement prévus pour ce type
de produits.
Disposal:
(in accordance with RL2002/96/EC)
The product must not be added to
normal household waste. It must be
disposed of properly.

Chat with your Eden 114 manual using AI

Get instant AI answers from your Eden 114 manual

Ask anything about the Eden 114. Answers come from this manual, with the pages they are based on.

114 Maintenance Schedule

Regular
Clean filter rotor and housing

Wash the strainer, rotor and pump chamber regularly with a non-metallic brush to remove debris and lime-scale.

As needed
Replace bushings if noisy

If the pump becomes too noisy after prolonged running, replace the bushings by pushing new ones into place with holes facing inward.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend 114?

Yes No
0
User Pic

Nina Keller

10 months ago

Is the aquarium pump actually reliable, and how fast is the delivery?

0
User Pic

Manual.ly

10 months ago

Yes. Customers report the pump works flawlessly in daily aquarium use. Delivery is also described as quick and correct, with no issues once it arrives. If you have specific performance needs, make sure the pump matches your tank size and desired flow rate before ordering.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It is designed to circulate water in aquariums and help maintain steady movement through a tank setup. Some related versions are also intended for indoor decorative water features, but the core use is aquarium circulation.

Is this answer helpful?

A

The pump includes a six-position flow control. Turn the control toward minimum or maximum until the desired output appears on the indicator. This lets you match the flow to the tank’s size and inhabitants.

Is this answer helpful?

A

Unplug all equipment first, remove the pump cover and strainer, then take out the rotor. Rinse the parts with clean water and a non-metallic brush. For mineral buildup, soak components in vinegar or lemon juice.

Is this answer helpful?

A

Noisy operation may mean the bushings are worn. Open the pump, remove the old bushings, and install new ones from a dealer, making sure the shaft openings face inward and sit firmly in place.

Is this answer helpful?

A

No. It is not meant for swimming pools or bathrooms. It should be used only within the limits stated by the manufacturer, including temperature limits and the correct indoor or aquarium application.

Is this answer helpful?

A

Yes, it includes a 24-month warranty against material and manufacturing defects. However, damage from misuse, poor maintenance, technical changes, or normal wear parts such as the rotor is not covered.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Quiet Whirler rotor design helps reduce vibration and running noise.
  • Six-level flow control allows better tuning for different aquarium needs.
  • Sealed, overheating-protected motor reduces routine maintenance demands.
  • Simple cleaning process makes upkeep manageable for most users.
VS

Disadvantages

  • Power cable cannot be repaired or replaced, so damage may require full replacement.
  • Wear parts like the rotor are not covered by warranty.
  • Not suitable for swimming pools or bathrooms.
  • Some versions are restricted to indoor or aquarium-only use.
M: OA-GPT-54-NAN

Product Specification

Type

Submersible pump

Suitability

Freshwater, Saltwater, Aquaristics

Flow rate

52.83-158.50 gal/h

Net pump head

4.27 ft

Connections

0.47 in hose connection (inner diameter)

Power consumption

11W

Dimensions

1.79x3.07x2.44 in (WxHxD)

Special features

4.92 ft supply cable, Suction cups

Manufacturer's warranty

three years

M: OA-GPT-54-NAN

Product Description

Eden 114 Aquarium Water Pump

The Eden 114 Aquarium Water Pump is designed for dependable water circulation in aquariums and, in certain versions, suitable indoor water features. Built with a sealed motor and a six-step flow adjustment system, it focuses on quiet operation, steady performance, and simple day-to-day use. If you are looking for the Eden 114 Aquarium Water Pump Manual, the key takeaways are easy maintenance, safe operation, and clear guidance on cleaning and care.

Reliable circulation for everyday aquariums

This pump uses the brand’s "Whirler" rotor concept, which helps reduce vibration and noise while supporting smooth movement of water. The integrated shaft and self-lubricating bushings are intended to improve durability and limit wear over time. For aquarium owners, this means more stable water movement with less distraction from mechanical sound.

Easy flow control and practical maintenance

One of the strongest features is the adjustable flow output. With six positions, users can fine-tune circulation to match the needs of fish, plants, and tank size. This flexibility makes the pump useful in a variety of setups, from gentle aquarium filtration support to moderate water movement where stronger flow is preferred.

Maintenance is also straightforward. The pump can be cleaned by disconnecting it from power, removing the cover and strainer, and rinsing the parts with a non-metallic brush. If limescale builds up, a soak in vinegar or lemon juice can help restore performance. The motor is sealed and protected against overheating, so routine care is mostly about keeping the internal parts clean.

Safety, usage limits, and long-term value

The Eden 114 is built with important safety rules in mind. It is meant for aquarium use, with some models intended only for indoor applications. The instructions emphasize using a residual current device, matching voltage correctly, and avoiding use in pools or bathrooms. It also supports water temperatures up to 35°C, which fits common aquarium conditions.

A 24-month warranty covers material and manufacturing defects, though normal wear parts such as the rotor are excluded. That makes it a solid choice for users who want a practical pump with clear upkeep expectations and dependable daily service.

Notes

  • Always disconnect power before touching the pump or any submerged equipment.
  • Regular cleaning helps prevent clogging and lime-scale buildup.
  • Replacement bushings are available through dealers if noise increases after long use.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly