Manual.ly Logo

Edelrid Cable Comfort 6.0 Manual

0.0 · 0 Ratings

PDF manual · 68 Pages

English

M: QW-35-FL
page

/ 68

Loading...
3c1e1e05f0561d12575b6fead0ddf62d228e page 9
Maximale Lebensdauer bei optimalen Lagerbedingungen
(siehe Punkt Lagerung):
- Ohne Benutzung: 10 Jahre
- Bei gelegentlicher, sachgerechter Benutzung (ca. 1–2 mal
monatlich) ohne erkennbaren Verschleiß: 5 Jahre
- Bei häufiger Benutzung (wöchentlich) ohne erkennbaren Ver-
schleiß: 3 Jahre
- Bei professioneller/gewerblicher Benutzung (wöchentlich bis
täglich): 2 Jahre
Treten folgende, festigkeitsmindernde Faktoren überdurch-
schnittlich stark/häufig auf, kann sich die maximale Lebens-
dauer um bis zu 50% reduzieren:
- Staub
- UV-Strahlung
- Nass-Trocken-Zyklen (z. B. Canyoning)
- Hitze (> 60°)
Häufiger oder extremer Gebrauch, Sturzbelastung
Bei Beschädigungen ist das PSA – Produkt sofort dem Gebrauch
zu entziehen und einer sachkundigen Person oder dem Hersteller
zur Prüfung mit schriftlicher Bestätigung dieser und/oder ggf.
zur Reparatur zuzuführen.
Bei folgenden Einflussfaktoren muss das Produkt umgehend
ersetzt werden:
- Beschädigung der Gurtbandkanten
- Abrieberscheinungen der Nähte
- Kontakt mit Chemikalien (Säure, Lauge, Reinigungsmittel …)
- Dynamische Sturzbelastung, Markierung der Auslöseposition
beachten (siehe Abb. 3)
Karabiner mit starken Scharten oder Riefen müssen ebenfalls
ausgetauscht werden, es muss jederzeit die Funktionsfähigkeit
des Karabiners gegeben sein, d.h. der Schnapper muss selbst-
ständig vollständig schließen.
Instandsetzungen dürfen nur in Übereinstimmung mit dem vom
Hersteller angegebenen Verfahren durchgeführt werden.
AUFBEWAHRUNG, TRANSPORT UND PFLEGE
Lagerung, Transport:
Dauerlagertemperatur ca. –10 °C bis +30 °C, trocken und vor
Tageslicht geschützt. Ohne mechanische Quetsch-, Druck-
oder Zugbelastung lagern.
Das Produkt ist vor direkter Sonnenstrahlung, Chemikalien
(
Säuren (Achtung: Batteriesäure!), Laugen, Reinigungsmittel, etc.),
korrosive Substanzen, Verschmutzungen, Staub und mechani-
scher Beschädigung zu schützen. Dafür sollte ein geeigneter
Transportbehälter verwendet werden.
Reinigung: Siehe Abb. 6.
Handelsübliche, nicht halogenhaltige Desinfektionsmittel sind
bei Bedarf anwendbar. Die Gelenke von Metallteilen sind regel-
mäßig nach der Reinigung mit säurefreiem Öl oder einem Mittel
auf Teflon- oder Silikonbasis zu schmieren.
Achtung: Bei Nichtbeachtung dieser Gebrauchsanleitung
besteht Lebensgefahr!
Konformitätserklärung:
Hiermit erklärt die EDELRID GmbH & Co. KG, dass sich dieser
Artikel in Übereinstimmung mit den grundlegenden Anforde-
rungen und den relevanten Vorschriften der EU Verordnung
2016/425 befindet. Die Original-Konformitätserklärung kann
unter dem folgenden Internet-Link abgerufen werden: http://
www.edelrid.de/...
Kennzeichnungen auf dem Produkt
Hersteller: EDELRID
Produktbezeichnung: Fangstoßdämpfer für die Verwendung auf
Klettersteigen nach EN 958:2017
CE XXXX: die Produktion der PSA überwachende Stelle

Chat with your Edelrid Cable Comfort 6.0 manual using AI

Get instant AI answers from your Edelrid Cable Comfort 6.0 manual

Ask anything about the Edelrid Cable Comfort 6.0. Answers come from this manual, with the pages they are based on.

Cable Comfort 6.0 Maintenance Schedule

Remind me when maintenance is due
Yearly
Inspect the via ferrata set

The product must be checked at least once a year by a qualified person to ensure safety and serviceability.

After cleaning
Lubricate metal part joints

Regularly lubricate the joints of metal parts with acid-free oil or Teflon/silicone-based lubricant after cleaning.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Cable Comfort 6.0?

Yes No

Frequently Asked Questions

A

The Edelrid Cable Comfort 6.0 stretch is approved exclusively for users with a total weight between 40 kg and 120 kg, including all climbing equipment. Users outside this range must use an additional rope system for safety.

Is this answer helpful?

A

You must check the product for damage before and after every single use. Additionally, it must undergo a formal inspection by a qualified person at least once a year to ensure continued safety and functionality.

Is this answer helpful?

A

If the damping system has been subjected to a dynamic fall load beyond its strain limit, the entire set must be replaced immediately. Do not attempt to reset or reuse it after activation.

Is this answer helpful?

A

No, it is strictly forbidden to modify the connecting arms using knots or to alter the braking mechanism. Any unauthorized modification voids safety guarantees and may lead to severe accidents.

Is this answer helpful?

A

Products made from synthetic fibers age even when not used. Intense UV radiation accelerates this process and can reduce the maximum service life by up to 50 percent depending on exposure levels.

Is this answer helpful?

A

Yes, but the rental provider is responsible for inspecting the product before each issuance and after return. Professional use reduces the maximum service life to two years regardless of visible wear.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High-quality synthetic materials resist aging and provide long-term durability.
  • Effective shock absorption system reduces impact forces significantly during falls.
  • Includes self-locking carabiners that meet strict EN 12275 Type K safety standards.
  • Flexible design allows for comfortable movement and easier clipping on steep terrain.
  • Clear labeling indicates weight limits and manufacturing dates for easy tracking.
VS

Disadvantages

  • Strict weight limit excludes users under 40 kg or over 120 kg without extra safety gear.
  • Shorter lifespan for frequent commercial or professional use compared to occasional users.
  • Requires annual professional inspection which adds to long-term maintenance costs.
  • Cannot be modified or repaired by the user; must be sent to the manufacturer.
  • Sensitive to extreme temperatures and chemicals, requiring careful storage and handling.
M: QW-35-FL

Product Specification

Weight range

88-265 lbs

Weight

1.27 lb

Features

Belt fall damper, vortex

M: QW-35-FL

Product Description

Discover the Edelrid Cable Comfort 6.0 Stretch

The Edelrid Cable Comfort 6.0 stretch is a premium via ferrata set designed for climbers who demand both safety and comfort on vertical adventures. This equipment represents a significant step forward in personal protective gear, specifically engineered to absorb shock effectively while maintaining flexibility during dynamic movements. Whether you are tackling classic alpine routes or modern sport climbs, this set provides the reliability needed to focus entirely on the ascent.

Constructed from high-performance synthetic fibers such as polyamide, polyester, Dyneema, Aramid, and Vectran, the Cable Comfort 6.0 ensures durability against harsh environmental conditions. The design incorporates a specialized damping system that activates upon impact, reducing the force transmitted to the climber's body. This feature is crucial for minimizing injury risk during falls, ensuring that the energy is dissipated safely according to EN 958 standards.

Safety is paramount with this product. It is strictly intended for users with a total weight between 40 kg and 120 kg, including all gear. For those outside this range, additional rope securing systems compliant with EN 892 or EN 1891 are mandatory. The set includes self-locking carabiners of Type K, which prevent accidental opening and ensure continuous connection to the cable. Proper usage requires keeping one carabiner attached to the via ferrata cable at all times when switching positions.

Maintenance and longevity are key aspects of owning this gear. Even without use, the materials age due to UV exposure and climate factors. Under optimal storage conditions, the maximum service life ranges from two years for professional daily use to ten years if unused. Regular inspections by qualified personnel are required annually, and immediate replacement is necessary after any fall load or visible damage like abrasion or chemical contact. Always store the set in a dry, cool place away from direct sunlight and aggressive substances.

Important Notes

  • Never modify the connecting arms or braking mechanism.
  • Inspect before every use for wear or damage.
  • Replace immediately if the damping system shows signs of activation.
  • Avoid contact with acids, alkalis, and extreme heat above 60°C.
M: QW-35-FL

© Copyright 2026 Manual.ly