Manual.ly Logo

ECM Technika V Profi PID Manual

0.0 · 0 Ratings

PDF manual · 56 Pages

English

M: QW-35-FL
page

/ 56

Loading...
361080571003005bde5237499ff644c753b8 page 17
ENGLISH
Translation of the original German user manual 22
1 PRODUCT DELIVERY
1 portafilter 1 spout
1 portafilter 2 spouts
1 filter 1 cup
1 filter 2 cups
1 blind filter
1 tamper
1 metal hose 1/8” 3/8” BSPP
1 cleaning brush
1 user manual
2 GENERAL ADVICE
2.1 General safety notes
• Make sure that the local main supply voltage corresponds to the information given on the
type plate on the front panel of the espresso machine.
• The installation of the machine should be carried out by authorised specialists according
to the instructions in chapter 4.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Make sure the machine is disconnected from the power supply during service and when
replacing parts.
• Do not roll or bend the power cord.
• If the supply cord is damaged, it must be replaced by a service agent or similarly
qualified persons, in order to avoid a hazard.
• Do not use an extension cord/ do not use a multiple socket.
• Place the machine on an even and stable surface. Only use the machine on a water
resistant surface.
• Never place the machine on hot surfaces.
• Never submerse the machine in water; do not operate the machine with wet hands.
• Make sure that no liquid gets on the power plug of the machine or on the socket.
• The machine should only be used by experienced adult persons.
• The machine is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not expose the machine to inclement weather (frost, snow, rain) and do not use it
outdoors.
• Keep the packing out of reach of children.
• Only use original spare parts.
• Water tank machines or machines in water tank use: Do not operate the machine with
carbonated water, but with soft, potable water.
• Do not operate the machine without water.
• Please note that the surface of the machine, in particular the brew group and the steam
wand, become hot during operation and there is a risk of injury.
If you have any further questions or if you require any further information, please contact your specialised
dealer before starting up the espresso coffee machine.
Our machines comply with the relevant safety regulations.
Any repairs or changes of components must be carried out by an authorised specialty dealer. In case of non-
observance the manufacturer does not assume liability and is not liable to recourse.
See page 1 for your specialised dealer’s contact details. Authorised service points outside Europe can be
found in our dealer search on our website: www.ecm.de.
Important
You should use water with a hardness of max. 4° dH in order to protect your machine from
lime scale damage. When necessary, make use of a water softener in order to reach an
adequate hardness level.

Chat with your ECM Technika V Profi PID manual using AI

Get instant AI answers from your ECM Technika V Profi PID manual

Ask anything about the ECM Technika V Profi PID. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Technika V Profi PID?

Yes No

Frequently Asked Questions

A

The machine requires soft water with a maximum hardness of 4 degrees German hardness (4° dH) to prevent lime scale damage and ensure longevity.

Is this answer helpful?

A

Yes, the TECHNIKA V Profi PID can be connected to a direct water line using the provided hose and valve switch, in addition to using the built-in 3-liter water tank.

Is this answer helpful?

A

Press the minus and plus buttons simultaneously until 't1' appears, then press minus until 'CLn' shows. Use plus/minus to set the number of cycles (0-200), then wait for the menu to exit automatically.

Is this answer helpful?

A

No, you must never use carbonated water. Only soft, potable drinking water should be used to avoid damaging the internal pumps and boilers.

Is this answer helpful?

A

Depending on ambient temperature, the initial heat-up phase typically takes about 15 minutes until the boiler reaches approximately 120°C or 1.25 bar.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Precision PID temperature control allows for custom extraction profiles.
  • Dual functionality supports both water tank and direct plumbing connections.
  • Professional-grade steam wand produces excellent microfoam quickly.
  • Programmable cleaning reminders ensure consistent maintenance schedules.
  • Thermosyphon system provides stable heat retention for brewing.
VS

Disadvantages

  • Requires manual adjustment of brewing pressure by qualified technicians.
  • Descaling must be performed by professionals to prevent internal damage.
  • Water tank and accessories are not dishwasher safe.
  • Initial setup requires careful calibration of water pressure settings.
  • No automatic shut-off unless ECO mode is manually programmed.
M: QW-35-FL

Product Specification

Type

Double boiler

Power

1400W

Color

stainless steel

Coffee system

Ground coffee

Water tank capacity

3l

Features

Hot water and steam nozzle, boiler pressure gauge, pump pressure gauge, heated cup shelf, optional permanent water connection

Dimensions

12.8x15.4x18.7in (WxDxH)

Weight

61.73lbs

M: QW-35-FL

Product Description

Discover the ECM Technika V Profi PID: A Barista's Dream Machine

For the true coffee enthusiast, the ECM Technika V Profi PID represents the pinnacle of home espresso engineering. This machine is not merely an appliance; it is a gateway to crafting café-quality beverages right in your kitchen. Designed with precision and durability in mind, the TECHNIKA V Profi PID combines professional-grade components with user-friendly features, ensuring that every cup of espresso or cappuccino meets your exacting standards.

At the heart of this system lies a robust PID controller, offering unparalleled temperature stability. Whether you are pulling shots for a delicate single-origin bean or steaming milk for a rich latte, the ability to fine-tune extraction temperatures between 120°C and 127°C ensures optimal flavor extraction. The machine features a thermosyphon heating system that maintains consistent heat, while the anti-vacuum valve prevents boiler pressure loss during operation.

Versatility is another hallmark of this device. It supports both water tank operation with a generous 3-liter capacity and direct plumbing connections, allowing you to integrate it seamlessly into any kitchen setup. The included dual-spout portafilter accommodates both single and double shots, while the powerful steam wand delivers dry, high-pressure steam for rapid milk texturing. Safety is prioritized with grounded electrical requirements, clear pressure gauges for monitoring boiler and pump status, and comprehensive guidelines for safe operation.

Maintenance is straightforward yet critical for longevity. The programmable cleaning reminder (CLn) alerts you when the brew group requires attention, typically after 90 to 140 cycles. Regular descaling with soft water (max 4° dH hardness) protects the internal components from lime scale damage. The machine also features an ECO mode to automatically power down after periods of inactivity, saving energy without sacrificing readiness.

Whether you are upgrading from a basic model or seeking a reliable workhorse for daily use, the ECM Technika V Profi PID delivers exceptional performance. Its compact footprint belies its powerful capabilities, making it an ideal choice for those who demand perfection in every sip.

M: QW-35-FL

© Copyright 2026 Manual.ly