Manual.ly Logo

ECM S-Manuale 64 Manual

0.0 · 0 Ratings

PDF manual · 29 Pages

English

M: OA-GPT-54-NAN
page

/ 29

Loading...
d50c2b3864818695c140db48df91553dc032 page 11
Bedienungsanleitung/ Instruction manual 16
1 INCLUDED WITH DELIVERY
1 Grinder with bean hopper and lit
1 Catching tray for grounds
1 Safety screw fixture for bean hopper
1 Instruction manual
2 GENERAL ADVICE
2.1 General safety notices
• Make sure that the local main supply voltage corresponds to the information given on the type
plate on the front panel of the coffee grinder.
• Always fasten the bean hopper with the saftey screw.
• Carry out the installation of the grinder according to the instructions.
• Plug the grinder into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Always remove the electrical plug from the outlet prior to conducting maintenance or cleaning
work on the grinder.
• Do not use an extension cord/ do not use a multiple socket.
• Place the grinder on an even and stable surface.
• Never place the grinder on hot surfaces.
• Never immerse the grinder into water; do not operate the grinder with wet hands
• The grinder should only be used by experienced adult persons.
• The grinder is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not expose the grinder to inclement weather (frost, snow, rain) and do not use it outdoors.
• Keep the packing out of reach of children.
• Use original spare parts only.
• Do not exceed the maximum allowable continuous grinding time of 5 minutes. Afterwards, allow
the grinder to cool off before the next operation.
If you have any further questions or if you require any further information, please contact your specialised dealer
before starting up the coffee grinder.
Our machines comply with the relevant safety regulations.
Any repairs or changes of single components must be carried out by an authorised specialty dealer.
In case of non-observance the manufacturer does not assume liability and is not liable for recourse.
Ask for authorised service points outside of Europe.
See page 1 for your specialised dealer’s contact details.
2.2 Proper use
The S-Automatik 64 has to be used for whole, unground, roasted, cleaned coffee beans only. The grinder is not
intended for commercial use.
Use of the grinder other than for the above mentioned purpose is strictly prohibited. The manufacturer cannot be
held responsible for damages due to unsuitable use of the machine and is not liable for recourse.
This appliance is intended to be used in households and similar applications such as:
• staff kitchen areas in shops, offices and other working environments
• farm houses
• by clients in hotels, motels and other residential type environments
• bed and breakfast type environments

Chat with your ECM S-Manuale 64 manual using AI

Get instant AI answers from your ECM S-Manuale 64 manual

Ask anything about the ECM S-Manuale 64. Answers come from this manual, with the pages they are based on.

S-Manuale 64 Maintenance Schedule

Remind me when maintenance is due
Monthly
Clean the grinding mechanism with ECM Grinder Cleander

Use special cleaner every 4 weeks. Grind granules 3-4 times until brown, then brush or vacuum burrs.

Show in the manual (page 12)
Before refilling
Clean the bean hopper

Wipe with a damp cloth before each refill to remove coffee oil residues that affect flavor.

Show in the manual (page 13)
Occasionally
Clean the housing and tray

Wipe the exterior housing and catching tray occasionally with a damp cloth.

Show in the manual (page 13)
Usage-based
Replace the burrs

Contact an authorized dealer for replacement after grinding 400-500 kg of coffee.

Show in the manual (page 16)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend S-Manuale 64?

Yes No

Frequently Asked Questions

A

Use whole roasted coffee beans only. The grinder is not meant for pre-ground coffee or caramelized beans, since those can affect performance and damage the intended grinding process.

Is this answer helpful?

A

Make adjustments while the grinder is running. Turn the adjustment wheel in small steps: clockwise for a finer grind and counter-clockwise for a coarser one. Testing in small increments gives the best result.

Is this answer helpful?

A

A single shot grinds one portion with one quick activation. A double shot uses two quick presses and produces two portions. The automatic version can also be programmed for both amounts.

Is this answer helpful?

A

Routine cleaning is recommended, and a deeper clean with grinder cleaner is suggested about every four weeks. The hopper and housing should also be wiped regularly to reduce oil buildup.

Is this answer helpful?

A

Set the grind coarser, run the grinder briefly, and then readjust the setting. If the chute is blocked, unplug the grinder first and clear the grounds carefully with a suitable tool.

Is this answer helpful?

A

No. The instructions limit continuous grinding time and recommend cool-down breaks afterward. This helps protect the motor and maintain stable performance over time.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 64 mm burrs support consistent espresso grinding with solid flavor clarity.
  • Manual and automatic versions offer flexible control for different brewing habits.
  • Small-step grind adjustment helps users fine-tune shot quality with precision.
  • Cleaning and troubleshooting guidance make long-term care easier to manage.
VS

Disadvantages

  • Not suitable for already ground coffee, caramelized beans, or general-purpose use.
  • Requires regular cleaning to avoid residue buildup and flavor impact.
  • Some maintenance steps, like burr cleaning, are technical and time-consuming.
  • Continuous grinding must be limited, so the machine needs cool-down breaks.
M: OA-GPT-54-NAN

Product Specification

Operating Mode

Mains Operation (450W)

Color

silver

Grinder

adjustable grinder (stepless)

Capacity

1.10 lb (Beans)

Special Features

adjustable grinding quantity

M: OA-GPT-54-NAN

Product Description

ECM S-Manual 64 Manual: Precision Grinding for Espresso Lovers

The ECM S-Manual 64 Manual highlights a grinder designed for coffee drinkers who care about control, freshness, and reliable espresso preparation. Built around a polished stainless-steel body and 64 mm steel burrs, this grinder is made to deliver a steady grind that supports balanced extraction and a richer cup. It is a compact machine, but it brings a professional feel to home brewing and other small-use settings where consistency matters.

What stands out most is the grinder’s practical approach to daily coffee making. The manual version uses a contact spring to start grinding, while the automatic version adds a display, programmed portion control, and a quantity counter. That makes it easy to choose between a quick single shot, a double shot, or a longer manual grind when a recipe calls for more flexibility. The grind setting can be adjusted in small steps, helping users fine-tune the result based on bean type, roast level, humidity, and personal taste.

The machine is clearly built with espresso in mind. It is intended for roasted coffee beans only, and the text emphasizes proper use, safe handling, and regular care. The bean hopper is secured with a safety screw, the grinder should stand on a stable surface, and the power cord should be treated carefully. These details may sound simple, but they reflect the grinder’s focus on dependable everyday operation rather than flashy extras.

Maintenance is another strong part of the experience. Regular cleaning helps preserve flavor, prevent old residue from affecting aroma, and keep the burrs performing well. The instructions also describe what to do if beans jam, if the chute becomes blocked, or if the grind setting shifts over time. In other words, the ECM S-Manual 64 Manual is not just about grinding coffee; it is about keeping the brewing routine smooth, repeatable, and predictable.

Notes

  • Use only roasted, unground coffee beans.
  • Adjust grind size while the grinder is running for better precision.
  • Clean the hopper and grinding parts regularly to protect flavor.
  • For repairs or burr replacement, use authorized service support only.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly