Eaton 9SX 6000i Manual
PDF manual · 60 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Eaton 9SX 6000i manual using AI
Get instant AI answers from your Eaton 9SX 6000i manual
Ask anything about the Eaton 9SX 6000i. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend 9SX 6000i?
Yes NoFrequently Asked Questions
The Eaton 9SX 6000i provides true online double-conversion protection against outages, voltage sags and surges, frequency deviations, spikes and harmonics, ensuring continuous clean power to connected equipment.
Is this answer helpful?
Yes. The 9SX supports external battery modules (EBMs); up to four EBMs can be connected depending on the model to significantly extend runtime for prolonged outages.
Is this answer helpful?
Standard interfaces include USB and RS232 plus dry-contact relays. Optional network cards add SNMP/HTTP, Modbus and Gigabit Ethernet for remote management, email alerts and integration with Eaton Intelligent Power software.
Is this answer helpful?
Batteries typically last 3–5 years depending on use and temperature. Replace proactively around four years. For long storage, recharge the batteries every six months and follow Eaton guidance to maintain battery health.
Is this answer helpful?
The unit uses sealed lead-acid batteries; do not incinerate or dispose with household waste. Follow local WEEE and battery disposal regulations and use authorized recycling or hazardous waste facilities.
Is this answer helpful?
Yes. The 9SX is generator-compatible and has configurable bypass and synchronization settings to work properly with generator sources, subject to correct installation and settings.
Is this answer helpful?
Enable remote commands and install Eaton Intelligent Power software. Configure communication and shutdown command settings on the UPS (Com Settings) to allow software-driven startup/shutdown and to send status events to management systems.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- True online double-conversion topology ensures stable, regulated power under varying grid conditions.
- Advanced Battery Management (ABM) extends battery life and supports up to four external battery modules for extended runtime.
- Comprehensive communications: USB, RS232, dry-contact relays and optional SNMP/HTTP, Modbus and Gigabit network cards.
- High-efficiency mode reduces energy losses and heat while maintaining fast transfer (<10 ms) to online mode on failure.
- User-friendly LCD with event logs, diagnostics and flexible configuration for voltage, bypass and battery settings.
Disadvantages
- Internal batteries and EBMs are heavy—installation and replacement require multiple people and careful handling.
- Battery life typically 3–5 years and replacement costs are recurring for long-term protection needs.
- Advanced repairs and internal servicing require authorized technicians; limited user-serviceable parts.
- Initial battery charging and full runtime require long charge times (24–48 hours) after installation or storage.
- Complex configuration options may require technical expertise to optimize for specific site power and generator setups.
Product Specification
Type
Tower
Classification
VFI (On-Line)
Apparent Power
6000VA
Active Power
5400W
Voltage
208-240V
Input
Hardwired
Interfaces
USB, serial
Weight
144.29lb
Dimensions (WxHxD)
9.61x22.64x21.34in
Special Features
LCD
Manufacturer's Warranty
two years
Product Description
Eaton 9SX 6000i 6000VA, USB/serial Manual
The Eaton 9SX 6000i (6000VA) is a high-performance online double-conversion UPS built for demanding IT and industrial environments. Designed to deliver clean, continuous power, the 9SX series protects equipment from outages, voltage sags and surges, frequency variations and other grid anomalies. The 6000VA model supports extended runtime via external battery modules (EBMs), offers generator compatibility, and includes USB and RS232 serial communication for monitoring and graceful shutdown.
Key features and operation
Featuring true online double-conversion topology, the 9SX 6000i provides consistent voltage and frequency regulation independent of input fluctuations. Its advanced battery management (ABM) optimizes battery life and charging cycles, while optional EBMs expand autonomy for longer outages. The UPS supports a High Efficiency mode to reduce energy loss and heat, and configurable output segments to prioritize critical loads.
The front panel includes a graphical LCD with five-button navigation for status, measurements, event logs and configuration. Local programming covers voltage/frequency settings, battery tests, bypass thresholds, alarm behavior and communications. Built-in dry-contact relays and optional network cards (SNMP/HTTP, Modbus, Gigabit) enable remote monitoring, email alerts and integration with Eaton Intelligent Power software for automated shutdowns and historical event reporting.
Installation and maintenance
The 9SX 6000i is available in tower and rack formats and requires careful mechanical handling due to heavy battery modules—two-person lift and proper footwear are recommended. Installation instructions cover wiring, fuse sizing, grounding, EBM connections and rack mounting. Regular maintenance guidance emphasizes ambient temperature control (ideally under 25°C), periodic battery charging during storage, and battery replacement every 3–5 years. The UPS provides lifecycle monitoring and reminders for battery replacement.
Safety and compliance
The unit includes safety symbols, WEEE and battery disposal guidance, and warnings to prevent shock and improper disposal. Repairs and internal battery replacement should be performed only by authorized personnel. The 9SX complies with relevant international standards for safety, EMC and performance.
Why choose the Eaton 9SX 6000i
For businesses needing reliable, scalable power protection with robust communications and manageability, the Eaton 9SX 6000i balances efficiency, runtime expandability and comprehensive control. It’s suited for servers, network equipment, industrial controllers and other sensitive electronics where uptime and clean power are essential.
Notes
- Battery charging begins immediately when mains is connected; a full initial charge requires at least 24 hours (Eaton recommends up to 48 hours after long storage).
- Up to four EBMs can be connected for extended runtime (model-dependent configurations apply).
- Use the Eaton Intelligent Power software for automated safe shutdowns and centralized monitoring.
- Follow local regulations for disposal of sealed lead-acid batteries and electronic waste.
Search for 67,706 Manuals online
Type-in Brand or Model