Eaton 9SX 5000i Manual
PDF manual · 60 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Eaton 9SX 5000i manual using AI
Get instant AI answers from your Eaton 9SX 5000i manual
Ask anything about the Eaton 9SX 5000i. Answers come from this manual, with the pages they are based on.
9SX 5000i Maintenance Schedule
The UPS automatically tests batteries every week in constant charge mode or at each ABM cycle. The test discharges batteries for 10 seconds under load.
If the UPS is stored for a long period, energize it for at least 24 hours once every 6 months to charge the battery and avoid irreversible damage.
Batteries are rated for 3-5 year service life. Replace batteries at least every 4 years to keep units running at peak efficiency.
In ABM cycling mode, the UPS performs an automatic battery test at each cycle to ensure battery health and capacity.
Keep the area around the equipment clean and dust free. If the atmosphere is very dusty, clean the outside of the system with a vacuum cleaner.
Free maintenance reminders
Timed to your purchase date. Always free, unsubscribe anytime.
Ask a Question
Do you recommend 9SX 5000i?
Yes NoFrequently Asked Questions
The internal sealed lead-acid batteries are rated for a 3 to 5-year service life at 25 degrees Celsius. Service life decreases by half for every 10 degrees above this temperature. It is recommended to replace batteries every 4 years to maintain peak efficiency.
Is this answer helpful?
Yes, the 9SX 5000i can support up to four Extended Battery Modules. Connecting these modules allows you to significantly increase the backup time to meet the specific duration requirements of your critical equipment.
Is this answer helpful?
If the internal temperature becomes too high, the UPS will generate an alarm. If the temperature rises further, it will automatically transfer the load to Bypass mode to prevent damage. If Bypass is unavailable, the unit may shut down. You should clear vents and remove heat sources immediately.
Is this answer helpful?
Yes, the unit features utility frequency independence and generator compatibility. It can operate effectively with generator power sources, ensuring your equipment remains protected even during grid outages where generators are the primary power source.
Is this answer helpful?
After replacing the batteries, you must manually reset the Life Cycling Monitoring. Navigate to the Control menu on the front panel display, select Reset battery life, and confirm the action to initialize the new 4-year cycle.
Is this answer helpful?
No, the manual explicitly states that this system is not intended for use in a computer room as defined by ANSI/NFPA 75 standards. It is designed for general commercial and industrial environments within specified temperature ranges.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- True online double-conversion technology ensures zero transfer time and clean power output.
- ABM technology significantly extends battery service life and optimizes recharge efficiency.
- Supports up to four Extended Battery Modules for customizable runtime extensions.
- Standard USB and RS-232 ports allow for immediate software integration and monitoring.
- Selectable High Efficiency mode reduces energy consumption and heat generation.
Disadvantages
- Requires a mandatory 24-hour charging period after initial installation before full backup time is available.
- Heavy weight necessitates two-person handling or specialized lifting equipment for safe installation.
- Batteries have a limited service life of 3-5 years and must be replaced periodically.
- High-capacity models require hardwired connections rather than simple plug-in cables.
- Initial setup requires careful configuration of input voltage and bypass settings.
Product Specification
Type
Tower
Classification
VFI (On-Line)
Apparent Power
5000VA
Real Power
4500W
Voltage
200V-240V
Input
Fixed Connection
Interfaces
USB, Serial
Weight
144.40lbs
Dimensions (WxDxH)
9.61x22.64x21.34in
Features
LCD, HID Support
Manufacturer Warranty
two years
Product Description
Eaton 9SX 5000i: Reliable Power Protection
The Eaton 9SX 5000i Uninterruptible Power Supply stands as a robust guardian for critical electronic equipment, designed to shield sensitive data and hardware from the unpredictable nature of utility power. This unit is part of the acclaimed 9SX range, engineered with precision to handle power failures, surges, sags, and frequency variations that can otherwise lead to costly downtime or permanent damage.
At its core, the 9SX 5000i utilizes true online double-conversion technology. This ensures that your connected devices receive clean, stable power regardless of input quality. The system operates independently of utility frequency, making it compatible with generators and suitable for diverse environments. A standout feature is the ABM technology, which intelligently manages battery charging cycles. This not only extends the lifespan of the batteries but also optimizes recharge times and provides early warnings before the end of useful life.
For users seeking flexibility, the 9SX 5000i offers selectable High Efficiency modes. This allows the unit to bypass internal conversion when utility power is stable, significantly reducing energy consumption and heat output in the rack environment. Communication is seamless through standard RS-232 and USB ports, enabling easy integration with Eaton Intelligent Power Software for real-time monitoring and automatic system shutdowns during prolonged outages.
Installation is straightforward for both tower and rack configurations. The unit supports up to four Extended Battery Modules, allowing for significant runtime extension to match specific operational needs. Whether protecting servers, medical equipment, or industrial controls, the 9SX 5000i delivers outstanding reliability backed by worldwide agency approvals.
Key Features
- True online double-conversion for pure sine wave output.
- Advanced Battery Management (ABM) for extended battery life.
- Flexible connectivity with USB, RS-232, and optional cards.
- Scalable runtime via multiple Extended Battery Modules.
- User-friendly graphical LCD with intuitive navigation.
Important Notes
- Batteries require a 24-hour charge after initial connection to reach full capacity.
- Always ensure proper grounding and use qualified personnel for installation.
- Dispose of lead-acid batteries according to local hazardous waste regulations.
- Avoid installing near liquids or in excessively damp environments.
Search for 67,706 Manuals online
Type-in Brand or Model