Manual.ly Logo

Eaton 9PX 3000i RT3U Manual

0.0 · 0 Ratings

PDF manual · 40 Pages

English

M: OA-GPT-5-NAN
page

/ 40

Loading...
506908a1c54f278109aa909b2c6568a79ab3 page 1
ENGLISH
9PX 1000i
9PX 1500i
9PX 2200i
9PX 3000i
9PX EBM 48V
9PX EBM 72V
Installation
and user manual
Copyright © 2016 EATON
All rights reserved.
9PX 1-3 KVA EU_EN

Chat with your Eaton 9PX 3000i RT3U manual using AI

Get instant AI answers from your Eaton 9PX 3000i RT3U manual

Ask anything about the Eaton 9PX 3000i RT3U. Answers come from this manual, with the pages they are based on.

9PX 3000i RT3U Maintenance Schedule

Remind me when maintenance is due
Every 6 months
Recharge battery during storage

If storing the equipment for a long period, recharge the battery every 6 months by connecting the UPS to utility power.

Show in the manual (page 31)
Every 4 years
Replace batteries

Replace batteries at least every 4 years to keep units running at peak efficiency and before expected service life ends.

Show in the manual (page 31)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend 9PX 3000i RT3U?

Yes No

Frequently Asked Questions

A

The UPS includes a USB port and an RS-232 serial port as standard. An internal slot supports optional cards (Network-MS, Modbus-MS, Relay-MS) for SNMP/HTTP, Modbus and isolated dry-contact relay outputs.

Is this answer helpful?

A

Yes. The 9PX supports up to four Extended Battery Modules (EBMs) to increase backup time. EBMs are hot-pluggable and automatically detected, or can be configured manually for custom setups.

Is this answer helpful?

A

Yes. When used with the HotSwap MBP maintenance bypass module, you can replace or service the UPS while connected loads remain powered by the AC mains, avoiding downtime.

Is this answer helpful?

A

The 9PX uses ABM® advanced battery management (cyclic charging) to extend battery life, supports automatic scheduled battery tests, deep-discharge protection, and provides battery replacement alerts based on measured wear and runtime metrics.

Is this answer helpful?

A

The UPS must be grounded, handled by at least two people for heavy units, and installed in dry, ventilated environments. Batteries contain lead-acid cells and must be replaced with identical types; dispose of batteries per local hazardous-waste regulations.

Is this answer helpful?

A

HE mode powers the load from bypass when bypass quality is within configured tolerances, improving efficiency. It’s recommended for IT equipment where short transfers (<10 ms) to inverter are acceptable; disable if bypass is unreliable.

Is this answer helpful?

A

Eaton Intelligent Power Software (available from Eaton) integrates with the UPS for real-time monitoring, event logging, and automated graceful shutdown of connected systems when battery reserve is low.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • True online double-conversion topology for continuous clean sine-wave output and tight voltage regulation (±1%).
  • Hardwired input plus USB and RS-232 ports with optional Network/MS and Modbus cards for flexible monitoring.
  • Supports up to four EBMs and HotSwap MBP for scalable runtime and maintenance without downtime.
  • ABM battery management, scheduled battery testing, and extensive user-configurable settings increase battery life and control.
  • Rack/tower convertible 3U form factor with programmable outlet groups and clear five-button graphical LCD.
VS

Disadvantages

  • Physical weight and size require at least two people for installation and careful rack handling.
  • Full benefit of features often requires optional communication cards and EBMs, increasing total cost.
  • Battery replacement recommended every 3–5 years; long-term maintenance and disposal responsibilities apply.
  • High Efficiency mode depends on bypass quality; improper bypass conditions may prevent HE operation.
  • Some advanced setups require familiarity with RS-232 pinouts, relay wiring, and RPO/ROO configuration.
M: OA-GPT-5-NAN

Product Specification

Type

Tower/Rackmount

Classification

VFI (On-Line)

Apparent power

3000VA

Active power

3000W

Voltage

200-240V

Input

1x Fixed connection

Outputs

1x Fixed connection

Interfaces

USB, serial

Runtime

10min (50%), 3min (100%)

Weight

60.41 lb

Dimensions (WxHxD)

17.32x5.12x19.09in

Rack units

3U

Special features

LCD, rack-mountable

Manufacturer's warranty

three years

M: OA-GPT-54-NAN

Product Description

Eaton 9PX 3000W RT3U — Reliable, Rack-Ready Power Protection

The Eaton 9PX 3000W RT3U is a high-performance, rack/tower convertible UPS designed for critical IT and network installations where dependable, continuous power is essential. Built on Eaton’s proven double-conversion online topology, this 3 kVA/3 kW unit delivers stable, filtered sine-wave output, superior voltage regulation (±1%), and exceptional efficiency—making it ideal for servers, storage, network appliances, and mixed loads in data centers and edge environments.

Featuring hardwired capability alongside USB and RS-232 serial communication ports, the 9PX RT3U integrates smoothly into monitoring and management systems. Optional connectivity cards (Network-MS, Modbus-MS, Relay-MS) add SNMP, Modbus, HTTP and dry-contact relay support for enterprise monitoring, while Eaton Intelligent Power Software enables graceful shutdowns, event logging, and comprehensive power analytics. Extended runtime is supported through up to four hot-swappable Extended Battery Modules (EBMs), allowing the system to scale backup time to meet business continuity needs.

Designed for real-world installations, the RT3U model supports HotSwap MBP maintenance bypass for service without downtime and provides configurable outlet groups to prioritize critical loads. ABM® battery management extends battery service life by using intelligent charge cycles and configurable battery tests. High Efficiency mode and energy-saving settings help lower operating costs while maintaining protection. The UPS includes an intuitive five-button graphical LCD for status, logging, measurements, and easy on-site configuration.

Safety and serviceability are core strengths: the unit incorporates clear alarms, automatic transfer to bypass for fault scenarios, and detailed maintenance guidance (battery replacement, storage and EBM handling). Eaton’s attention to environmental stewardship is reflected in recyclable packaging and end-of-life recycling instructions, and the product meets key certifications such as IEC/EN 62040 and UL1778.

Whether deployed in a centralized rack or at the network edge, the Eaton 9PX 3000W RT3U offers a balanced combination of power density, manageability, and scalability—ideal for organizations seeking resilient, monitored power protection with flexible communication options.

Notes

  • Supports hardwired input and standard USB and RS-232 communication; optional cards expand network integration.
  • Up to 4 EBMs supported for extended runtime; HotSwap MBP enables service without load interruption.
  • ABM battery management and configurable tests prolong battery life and improve readiness.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly