Manual.ly Logo

EASYmaxx 04370 Manual

0.0 · 0 Ratings

PDF manual · 60 Pages

English

M: OA-GPT-54-NAN
page

/ 60

Loading...
274c90a79ed23950d87012aed8767c06121f page c
DE 12
4. Die Taste Speed drücken, um das Gerät einzuschalten. Der Lüfter beginnt auf Stufe
1 zu arbeiten. Der 1. Balken leuchtet konstant.
Das Gerät befi ndet sich voreingestellt im Kühl-Modus (blauer Balken). Die
Rotation und der Timer sind jeweils deaktiviert.
5. Die Taste Cold Warm (15) drücken, um in den Heiz-Modus zu wechseln. Der rote
Balken leuchtet und der obere Teil des Gerätes dreht sich um 180° um die eigene
Achse, bis der Warmluft-Austritt (9) nach vorne zeigt. Der Heizvorgang beginnt erst,
wenn sich der obere Teil vollständig gedreht hat.
Bei der Umstellung von Heiz- auf Kühl-Modus, stoppt der Heizvorgang und das
Gerät verbleibt zunächst für ca. 15 Sekunden in der Position, um das Gerät
herunterzukühlen. Anschließend dreht sich der obere Teil des Gerätes in die
Kühlposition.
6. Bei Bedarf die Geschwindigkeitsstufe, Rotation und den Timer einstellen (siehe
Kapitel „Funktionsübersicht“). BEACHTEN: Wurde ein Timer eingestellt, schaltet
sich das Gerät nach Ablauf der Zeit automatisch in Standby.
7. Die Taste Speed mehrmals drücken, um das Gerät auszuschalten.
8. Soll das Gerät nicht mehr verwendet werden, den Ein- / Ausschalter auf die
Position O stellen und den Netzstecker aus der Steckdose ziehen.
Reinigung und Aufbewahrung
BEACHTEN!
■ Zum Reinigen keine ätzenden oder scheuernden Reinigungsmittel verwenden.
Diese können die Oberfl äche beschädigen.
• Das Gerät bei Bedarf abstauben oder es ggf. mit einem feuchten Tuch abwischen.
Anschließend mit einem trockenen Tuch trockenwischen.
• Das Gerät arbeitsbereit halten. Regelmäßig (alle 3 bis 6 Monate) bzw. bei Bedarf
den Lamellen-Einsatz (7) wechseln (siehe Kapitel „Lamellen-Einsatz anfeuchten
und Wassertank befüllen“).
• Bei längerem Nichtbegrauch bzw. vor dem Verstauen eventuell vorhandenes Rest-
wasser aus dem Wassertank (1) entfernen.
• Das Gerät bei Nichtgebrauch vor Staub geschützt an einem sauberen, trockenen,
für Kinder und Tiere unzugänglichen Ort aufbewahren.

Chat with your EASYmaxx 04370 manual using AI

Get instant AI answers from your EASYmaxx 04370 manual

Ask anything about the EASYmaxx 04370. Answers come from this manual, with the pages they are based on.

04370 Maintenance Schedule

Remind me when maintenance is due
Every 3 to 6 months
Replace lamella insert

Change the lamella insert regularly or as needed. Moisten it in cold water before reinserting.

Show in the manual (page 12)
As needed
Replace remote control batteries

Replace batteries when the remote control power starts to wane. Use two 1.5 V AAA batteries.

Show in the manual (page 10)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend 04370?

Yes No

Frequently Asked Questions

A

Moisten the lamella insert and fill the water tank with cold tap water (up to 700 ml). Insert the components correctly, then start the device; it is preset to cooling mode with a blue indicator. If the air feels not cold, check that the lamella insert is moist and the tank is not empty.

Is this answer helpful?

A

The remote can control functions similar to the control panel. However, the remote Speed button manages only fan speed intensity levels (it changes the speed sequence). To place the unit into standby via remote, press the Standby button; this switches directly without cycling through all phases.

Is this answer helpful?

A

When you change to heating, the warm-air outlet is positioned forward and the heating begins only after the upper rotating part completes its repositioning. When switching back to cooling, heating stops and the device remains briefly to cool down before moving into the cooling position.

Is this answer helpful?

A

No. Do not cover the device while it is running, and do not hang items over it to dry. Covering can cause overheating. Keep at least 30 cm clearance above and around the unit and avoid placing it near curtains or other flammable materials.

Is this answer helpful?

A

If the unit is tilted beyond about 45 degrees (plus/minus 10 degrees), a safety switch moves it to standby. Place it on a stable, level surface. Also note that a timer setting will automatically switch the device to standby after the selected time.

Is this answer helpful?

A

The remote needs two 1.5 V AAA batteries (not included). Insert them with correct polarity (+/-). Replace them when remote performance declines.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Cooling, humidification, and supplementary heating in one standing unit.
  • Adjustable airflow intensity with multiple levels plus rotation (swing).
  • Timer options with automatic switch to standby after the set time.
  • Safety switch triggers standby if the device is tilted beyond about 45 degrees.
VS

Disadvantages

  • Heating is supplementary, not a complete replacement for a full heater.
  • Cooling depends on water and a properly moistened lamella insert.
  • Must not be covered during operation and requires clearance around the unit.
  • Not suitable for operation with external timer devices or separate remote systems.
M: OA-GPT-54-NAN

Product Specification

Operating Mode

Mains Operation (12W)

Color

black, white

Speed Levels

4

Features

Remote control, non-slip, heating function, automatic shut-off, switchable air cooler with 0.74 qt water tank

Dimensions

5.91x12.99 in (Diameter x Height)

M: GO-GEM-FL-25

Product Description

EASYmaxx Cooling & Heating Standing Fan/Air Cooler Manual

Overview

The EASYmaxx Cooling & Heating Standing Fan/Air Cooler Manual powered standing unit is designed to help you manage indoor comfort with a two-in-one approach: cooling with humidification and supplementary heating. It is aimed at everyday, private household use in well-insulated rooms or for occasional comfort boosts, rather than replacing a full heating or air-conditioning system.

With a standing design, easy-to-read controls, and a remote option, the unit lets you adjust airflow intensity in multiple steps, enable or disable rotation, and set a timer (2H, 4H, 6H, 8H). In cooling mode, the lamella insert is moistened and paired with a filled water tank to support evaporative humidification alongside the cold-air flow.

Cooling, heating, and humidification in practice

Before cooling, you moisten the lamella insert and fill the water tank with up to 700 ml of cold tap water. When you switch from cooling to heating, the device stops heating briefly to cool down and then repositions for warm air output. A built-in calibration routine aligns the airflow outlet orientation so the cold or warm outlet faces the correct direction when you start.

For operation, place the fan on a dry, level, sturdy surface with at least 30 cm clearance above and around the unit. Avoid covering the device during use, keep it away from flammable materials, and do not operate it near baths, showers, or swimming pools.

Key results

  • Cooling and supplementary heating with automatic repositioning of cold or warm outlets.
  • Evaporative humidification in cooling mode using a moistened lamella insert and up to 700 ml water.
  • Multiple airflow levels plus rotation (swing) control and a timer with auto-standby.
  • Safety shutoff: the unit switches to standby if tilted beyond about 45 degrees (plus/minus 10 degrees).

Pros and cons

Pros

  • Convenient cooling plus supplementary heating for quick seasonal comfort.
  • Remote control with up to about 5 m range and simple mode controls.
  • Timer settings and rotation (swing) improve comfort flexibility.
  • Automatic standby for tilted positioning enhances day-to-day safety.

Cons

  • Heating is supplementary (max 800 W) and cooling power is limited (max 12 W).
  • Cooling relies on water and a moistened lamella insert, requiring maintenance.
  • Not intended for small rooms with people who cannot leave without help unless continuously supervised.
  • Do not use with external timers or separate remote-control systems.

Notes

  • Use only suitable, properly installed power outlets and keep the mains cable clear of trip hazards.
  • For best results, keep the lamella insert updated (regularly every 3 to 6 months or as needed) and remove residual water before storage.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly