Manual.ly Logo

Dupla Thermik Set Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: QW-35-FL
page

/ 2

Loading...
713def625198a52f0ea2ba7e19e39f9473d1 page 2
Dupla Thermik Set 120 (20W) - Art. Nr. 80680
Dupla Thermik Set 240 (40W) - Art. Nr. 80681
Dupla Thermik Set 360 (60W) - Art. Nr. 80682
Merkmale: Transformator
• Sicherheitstrenntransformator
• Sekundärseitig Niederspannung 24 Volt
• Schutzisoliert-Spritzwasserschutz
• Integrierter Thermo-Schutz
Merkmale: Bodenkabel
• Betriebsspannung 24 Volt
• Material Silikon
Achtung! Das Kabel nicht an die Hausnetzspan-
nung 230 Volt anschließen!
Einsatzgebiet:
Bodenkonvektor zur Wurzelaktivierung, für
Aquarien bis 120 / 240 / 360 Liter.
Das DuplaThermik Set ist nicht zur Komplettbe-
heizung von Aquarien bestimmt. Zur Beheizung
benötigen Sie eine weitere Wärmequelle.
Betriebsvorbereitung:
1. Verlegen Sie das Kabel bogenförmig im Aquari-
um.
2. Bedecken Sie das Kabel mit Aquarienkies 2-3
mm. Empfehlung: Bodengrunddünger Dupla Root
verwenden.
3. Befüllen Sie das Aquarium mit Wasser.
4. Schließen Sie das Kabel an den Transformator an.
5. Stellen Sie den Transformator an einer geeigneten
Stelle des Aquarienunterschrankes auf.
6. Stecken Sie den Stecker der Netzanschlußleitung
in die Steckdose der Hausstromversorgung.
7. Das DuplaThermik Set ist jetzt betriebsbereit.
Wichtige Sicherheitshinweise !!!
• Das Gerät (Transformator) nur an Wechsel-
strom anschließen.
• Die auf dem Typenschild des Gerätes
angegebene Netzspannung
muss mit der des
Hausnetzes übereinstimmen.
• Den Transtormator nur an Steckdosen mit
Schutzkontakt anschließen.
• Den Transformator nicht in die Nähe von
Wärmequellen stellen.
• Den Transformator nicht in Wasser tauchen
oder mit Wasser in Berührung bringen.
• Den Stecker der Netzzuleitung nicht an der
Leitung aus der Steckdose ziehen.
• Die Netzzuleitung nicht über Ecken oder
Kanten legen oder hängen.
• Den Transformator nicht in Betrieb nehmen
wenn die Netzzuleitung oder das Gerät selber
beschädigt ist.
• Nur einwandfreie Verlängerungsschnüre
verwenden.
• Den Transformator von Kindern fernhalten.
• Tranformator nicht öffnen. Im Falle eines
Defektes wenden Sie sich an den Dupla
Vertragspartner.
• Das Set wurde ausschließlich für den
Gebrauch an Aquarien konzipiert. Jede
zweckentfremdete oder der Gebrauchsanwei-
sung zuwiderlaufende Benutzung führt zum
Erlöschen der Gewährleistungs/Garantiean-
sprüche. Für eventuelle Schäden wird keine
Haftung übernommen.
Technische Daten
Transformator
: Sicherheitstrenntransformator
Betriebsspannung: primär 230 Volt
sekundär 24 Volt
Netzzuleitung: 2 m
Integrierter Thermoschutz • Spritzwasserschutz
Kabel: Betriebsspannung: 24 Volt
Länge des Heizleiterkabels:
Dupla Thermik Set 120: 3 m
Dupla Thermik Set 240: 5 m
Dupla Thermik Set 360: 7 m
Material: Silikon
CE
Abbildungen sind unverbindlich.
Technische Änderungen vorbehalten.
Dupla Thermik Set
Dupla Thermik Set 120 (20W)
- no. de ref. 80680
Dupla Thermik Set 240 (40W)
- no. de ref. 80681
Dupla Thermik Set 360 (60W)
- no. de ref. 80682
Caractéristiques techniques du transformateur
• Transformateur de sécurité
• Basse tension 24 Volt
• Protégé contre les éclaboussures d’eau
• Fusible intégre
Caracteristiques techniques du cable chauffant
• Tension de fonctionnement 24 Volt
• Materiau silicone
Attention!
Le câble ne doit jamais être raccordé â la maison
â une tension de 230 Volt!
Domaine d’utilisation:
Chauffage au sol pour la stimulation de l’activit
des racines, pour aquarium de 120 / 240 / 360
litres.
Le DuplaThermik Set n’est pas prévu pour
un chauffage complet de l’aquarium. Il est
complémentaire â un chauffage.
Mise en place:
1. Placez le câble chauffant dans le fond de
l’aquarium.
2. Recouvrez le câble chauffant avec du quart
de 2-3 mm. Nous recommandons d’enrichir le
substrat avec l’engrais au sol Dupla Root.
3. Remplissez l’aquarium d’eau.
4. Branchez le câble au transformateur.
5. Placez le transformateur â un endrolt adapté
non humide dans le meuble de l’aquarium.
6. Branchez la prise de l’adaptateur électrique
7. Le DuplaThermik Set est pret â fonctionner.
Recommandations importantes!!!
• Ne brancher l’appareil (transtormateur) qu’à
du courant alternatif.
• Les données electriques indiquees sur la carte
type de l’appareil doivent correspondent â
celles de votre maison.
• Le transformateur doit être branché â une
prise avec prise de terre et fusible.
• Ne jamais placer le transformateur â proximité
d’une source de chaleur.
• Ne jamais pionger le transformateur dans
l’eau ou l’asperger.
• Ne jamais enlever la prise en tirant sur le l
électrique.
• Ne jamais placer le l électrique sur un coi ou
une partie tranchante.
• Ne jamais faire fonctionner le transformate
quand l’un des appareils est endommagé.
• N’utiliser que des rallonges électriques en
parfait état adaptées â cet usage.
• Ne pas laisser le transformateur â portée des
enfants.
• Ne jamais ouvrir le transformateur. Dans le cas
d’un mauvais fonctionnement, adressez vous
â votre revendeur Dupla.
• Le Set a été conçu pour un usage strictement
réservé au domaine de l’aquariophilie. Une
autre utilisation ou un autre empioi que
celui indiqué dans le mode d’empioi annule
immediatement la garantie de l’appareil. Des
dommages éventuels ne seront pas pris en
compte.
Donnees techniques
du transformateur:
Transformateur de sécurité
Tension de fonctionnement: primaire 230 Volt
secondaire 24 Volt
l électrique: 2 m
Fusible intégré
Protégé contre les éclaboussures
du câble chauffant:
Tension de fonctionnement: 24 Volt
Dupla Thermik Set 120: 3 m
Dupla Thermik Set 240: 5 m
Dupla Thermik Set 360: 7 m
Matériau: silicone
CE
lllustrations sans garanties.
Sous toutes réserves de modications techniques.
Dupla Thermik Set
Dupla Thermik Set 120 (20W)
- prod. no. 80680
Dupla Thermik Set 240 (40W)
- prod. no. 80681
Dupla Thermik Set 360 (60W)
- prod. no. 80682
Specifications: transformer
• Segregated buffer transformer
• Secondary circult: low voltage 24 Volt
• Protective insulation - splash water protection
• Integrated thermo protection
Specifications: floor cable
• Operating voltage 24 Volt
• Material: silicon
Beware!
Never connect the cable to the 230 Volt mains
power supply!
Area of application:
Floor convector for root activation, suitable for
aquariums of up to 120 / 240 / 360 litres.
The DuplaThermik Set is not designed to provide
the complete heating of aquariums. To achieve
total, all-round heating a further heating appli-
ance is required.
Preparation for use:
1. Install the cable in a curved layout in the aquari-
um.
2. Cover the cable with 2-3 mm of aquarium gra-
vel. Recommendation: use Dupla Root fertilizer.
3. Fill the aquarium with water.
4. Connect the cable to the transformer.
5. Install the transformer in a suitable location in
the aquarium stand.
6. Insert the plug of the mains power connection
cable into the mains power supply wall socket.
7. The DuplaThermik Set is now ready for use.
Important safety instructions !!!
• Connect the appliance (transformer) only to
alternating current.
• The line voltage indicated on the type plate
must correspond to the mains power voltage.
• Connect the transformer only to wall sockets
with an earthing contact.
• Do not place the transformer near heat
radiating appliances.
• Do not dip the transformer into water, avoid
any contact between transformer and water.
• Do not pull on the cord itself when removing
the mains power supply cord from the wall
socket.
• Do not position or feed the mains power
supply cord over sharp edges or corners.
• Do not operate the transformer if the mains
power supply cord or the appliance itself is
damaged.
• Extension cords used must be in perfect and
undamaged condition.
• Prevent children from having access to the
transformer.
• Do not open the transformer. In case of a
defect contact your ofcial Dupla sales agent.
• The DuplaThermik Set was designed for
exclusive use in aquariums. Any other
unauthorised application, or any use contrary
to the instructions provided, will invalidate all
warranties. The manufacturer will not be held
liable for any damage caused.
Technical specifications
transformer:
Segregated buffer transformer
Operating voltage: primary 230 Volt secondary
24 Volt
Integrated thermo protection
Splash water protection
Length of power support cable: 2 m
cable:
Operatinq voltage: 24 Volt
Length of oor heating cable
Dupla Thermik Set 120: 3 m
Dupla Thermik Set 240: 5 m
Dupla Thermik Set 360: 7 m
Material: silicon
CE
All diagrams and photos not binding.
Technical specications subject to change
without notice.
Dupla Thermik Set
Dupla Thermik Set 120 (20W) - cod. art. 80680
Dupla Thermik Set 240 (40W) - cod. art. 80681
Dupla Thermik Set 360 (60W) - cod. art. 80682
Caratteristiche del trasformatore
• Trasformatore di disinserimento di sicurezza
• Bassa tensione secondaria 24 Volt
• Antispruzzi con protezioni isolate
• Protezione termica integrata
Caratteristiche del cavetto per il fondo
• Tensione d’esercizio 24 Volt
• Materiale: Silicone
Attenzione!
Non collegare mai
il cavetto ad una presa di
corrente a 230 Volt!
Collocazione:
Sul fondo come convettore per l’attivazione delle
radici, per acquari da 120/240/360 litri.
Il DuplaThermik Set non è stato studiato per
il totale riscaldamento degli acquari, per tale
scopo avete bisogno di un’ulteriore fonte di
riscaldamento.
Preparazione alla messa in funzione:
1. Porre il cavo a forma di arco nel acquario.
2. Coprire il cavo con ghiala per acquari da
2-3 mm. Consiglio: usare il fertilizzante da
fondo Dupla Root.
3. Riempire l’acquarlo con l’acqua.
4. Collegare il cavo al trasformatore.
5. Appogglare il trasformatore in posizione
idonea nell’armadietto sotto l’acquarlo.
6. Inserire la spina elettrica nella presa.
7. Ora il DuplaThermik Set e pronto per l’uso.
Avvertenze di sicurezza !!!
• Collegare l’apparecchio (trasformatore) solo a
corrente alternata.
• La potenza indicata sull’apparecchio deve
essere identica a quella dell’alimentazione.
• Collegare il trasformatore solo a prese di terra.
• Non tenere il trasformatore vicino a fonti di
calore.
• Non mettere il trasformatore nell’acqua e non
farlo bagnare.
• Non strappare la spina dalla presa di corrente.
• Il cavo di corrente non deve fare angoli.
• Non accendere il trasformatore se lo stesso o
il relativo cavo di corrente sono danneggiati.
• Usare prolunghe intatte.
• Tenere il trasformatore fuori dalla portata dei
bambini.
• Non aprire il trasformatore. In caso di difetto
rivolgersi ai concessionari Dupla.
• Il Set è stato concepito solo per uso
acquarlolo, qualslasi altro tipo di utilizzo fa
decadere le sue prestazione e la garanzia,
Dupla declina ogni responsabilitä.
Dati tecnici del trasformatore:
Trasformatore di disinserimento di sicurezza
Tensione d’esercizio: primaria 230 Volt
secondaria 24 Volt
Lunghezza del conduttore freddo: 2 m
Protezione termica integrata
Protezione schizzi
del cavo:
Tensione d’esercizio 24 Volt
Materiale: silicone
Lunghezza del conduttore caldo:
Dupla Thermik Set 120: 3 m
Dupla Thermik Set 240: 5 m
Dupla Thermik Set 360: 7 m
CE
Le illustrazioni non sono vincolanti.
Modiche tecniche ammesse.
Dupla Thermik Set

Chat with your Dupla Thermik Set manual using AI

Get instant AI answers from your Dupla Thermik Set manual

Ask anything about the Dupla Thermik Set. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Thermik Set?

Yes No

Frequently Asked Questions

A

It is a substrate heating cable for root activation in aquariums up to 360 liters. It is not for full tank heating.

Is this answer helpful?

A

The operating voltage is 24 volts. The transformer converts 230 volts to 24 volts safely.

Is this answer helpful?

A

No. Never connect the cable to 230 volt mains power. Always use the provided transformer.

Is this answer helpful?

A

Lay the cable at the bottom, cover with 2-3mm gravel, add water, and connect to transformer.

Is this answer helpful?

A

The transformer is splash proof but should not be submerged in water. Keep it dry.

Is this answer helpful?

A

No. It is not designed for complete heating. You still need a main heater for the water.

Is this answer helpful?

A

Using it outside aquariums or opening the transformer voids the warranty and safety guarantees.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Low voltage 24V operation ensures safety
  • Durable silicone cable for flexibility
  • Promotes healthy root growth in plants
  • Integrated thermal protection included
VS

Disadvantages

  • Does not provide full tank heating
  • Requires additional heater for complete warmth
  • Transformer must be kept dry
  • Not suitable for direct mains connection
M: QW-35-FL

Product Specification

Type

Heating cable

Application

Aquarium, Terrarium

Features

Suction holder, unregulated

M: QW-35-FL

Product Description

Elevating Your Aquarium with Root Activation

Creating a thriving underwater ecosystem requires attention to detail, particularly regarding plant health and growth potential. The Dupla Thermik Set Substrate Heating Cable Manual highlights a specialized tool designed for serious aquarists who want to optimize their planted tanks. This system ensures healthy root development without disturbing the tank's overall water temperature balance significantly. Unlike standard heaters, this set focuses specifically on the substrate layer where plant roots absorb nutrients most efficiently.

Key Features of the System

The core component is a durable silicone heating cable designed to operate at a safe 24 volts. This low voltage ensures safety within the wet water environment during operation. The included transformer provides a safe separation transformer, converting standard mains voltage to a secure low voltage for the cable. This setup prevents electrical hazards while providing consistent warming to the gravel layer below. The product comes in three distinct power variants to suit different tank sizes effectively. You can choose from Set 120 for smaller tanks or Set 360 for larger volumes to match your specific needs.

Installation Process

Setting up the Dupla Thermik Set is relatively straightforward and requires minimal patience. First, lay the heating cable in a curved pattern across the bottom of the aquarium carefully. Next, cover the cable with a thin layer of gravel, approximately 2 to 3 millimeters thick to ensure proper heat distribution. It is recommended to mix aquarium fertilizer like Dupla Root into the substrate for better biological results. Once the cable is covered, fill the tank with water up to the desired level. Connect the cable to the transformer securely, which must be placed in a dry area within the aquarium cabinet. Finally, plug the transformer into a grounded socket.

Safety and Precautions

Safety is paramount when using any electrical components near water and aquatic life. The guidelines explicitly warn against connecting the cable to 230 volt mains power directly. Always ensure the transformer remains completely outside the water at all times. Do not place the unit near other heat sources to prevent overheating. Children should be kept away from the transformer, and it should never be opened for repair personally. Use only extension cords that meet voltage specifications for your safety. If damage occurs, contact an authorized dealer rather than attempting repairs yourself.

Conclusion

This substrate heating solution complements standard tank heating systems perfectly. It is not a replacement for a primary heater but rather an addition. Proper use ensures enhanced plant growth and nutrient uptake over time. By following the provided usage advice you maintain a safe and fertile environment for your aquatic plants. This investment supports a balanced aquascape in the long run. Aquascaping is an art form that rewards patience and care. With the correct equipment, you can achieve stunning visual results and maintenance success.

M: QW-35-FL

© Copyright 2026 Manual.ly