Manual.ly Logo

Dupla CO2 Plus Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: QW-35-FL
page

/ 16

Loading...
301ef4e929f640f1a2849aeaa8419edbb730 page 4
4
CO
²
Armatur Plus
Thank you for choosing to purchase the CO
²
Armatur Plus. With the CO
²
Armatur Plus you have obtained a product of the highest quality and reliability.
Strict and continual quality checks and manufacture according to ISO 9001 ensure a product with a long service life. These operating instructions are part of the
product. They include important information on commissioning and operation. Keep the operating instructions for future reference.
Special features of the CO
²
Armatur Plus:
· high control accuracy through precision pressure reducer
· finely adjustable operating pressure setting
1
· pressure-tight fine precision needle valve
2
for high-precision bubble count setting
· large, easily readable working
3
and cylinder pressure gauge
4
· integrated overpressure safety valve
5
· wear-free seal to the cylinder valve
6
· incl. integrated check valve to protect the CO
²
fitting
· corrosion-resistant thanks to material finishing
· fine filter in cylinder connection and fine needle valve
· for all CO
²
cylinders with external cylinder valve
· low pressure has factory setting of 0 bar
· optimum operating pressure setting at 1 – 1.5 bar
· incl. quiet energy-efficient solenoid valve
7
for optimum CO
²
regulation
The CO
²
Armatur Pro with pre-assembled solenoid valve can be used for semi-automatic control by means of a timer switch or for fully automatic control by means
of a pH value regulation, e.g. via pH-Control (item no.: 80286) or Twin-Control (item no.: 80289). Controlled via a timer switch, the Solenoid Valve Pro will interrupt
the supply of CO
²
by closing when it is switched currentless and in this way can save up to 50 % of the CO
²
consumption. Since plants do not consume CO
²
at night,
the solenoid valve should here be synchronised with the light control for the aquarium. Combined with a pH value regulation, the CO
²
supply is optimised because
only the exact amount consumed is added to the aquarium. Thanks to its innovative electronic diode circuit, the CO
²
solenoid valve operates very quietly, is energy-
efficient and generates very little heat.
Special instructions: Replacing the depot and work on the CO
²
Armatur Pro must only be carried out when the device is pressureless.
Starting up: Make sure that the stainless steel needle valve
1
is closed before connecting the CO
²
Armatur Pro to the CO
²
Depot. Insert the cylinder connection
2
into the opening of the cylinder valve and tighten the union nut
3
hand-tight, possible using a 30 mm open-ended spanner. Connect the hose connection
spout
4
of the
CO
²
Armatur Pro to the
CO
²
Reactor or
CO
²
Atomiser using a
CO
²
tight hose. Completely open the cylinder valve and check the
CO
²
cylinder pressure
on the cylinder pressure gauge
5
. This is around 60 bar at room temperature. The preset operating pressure (operating pressure gauge
7
) set by the factory is 0 bar.
Note: The solenoid valve must be open, thus supplied with power, for the following steps to be carried out, because otherwise an exact setting of the
operating pressure is not possible.
For initial use, use the pressure adjustment screw 8 to set a operating pressure of around 1 – 1.5 bar. You can read off the set pressure
at the operating pressure
gauge
7
. Then use the adjustment screw on the stainless steel needle valve
8
to roughly define the desired bubble count. After approx. 1 day (running-in period)
you can use pressure adjustment screw
6
for further fine adjustment of the bubble count. The bubble count is proportional to the defined operating pressure. If
you have set a bubble count of around
10 bubbles per minute at a operating pressure of 1 bar, you can double the bubble count simply by increasing the operating
pressure
to 2 bar and halve the bubble count by reducing the operating pressure by half. This allows a convenient and precise bubble count setting. Turn the
pressure adjustment screw
6
anticlockwise to reduce the operating pressure.
1
5
2
6
7
3
4

Chat with your Dupla CO2 Plus manual using AI

Get instant AI answers from your Dupla CO2 Plus manual

Ask anything about the Dupla CO2 Plus. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend CO2 Plus?

Yes No

Frequently Asked Questions

A

Refill frequency depends on your tank size and run time. A standard 5-liter bottle typically lasts 1 to 3 months in a medium-sized aquarium running 8 hours daily. Monitor your drop checker color to determine if refills are needed sooner.

Is this answer helpful?

A

Yes, when used correctly. The system includes a solenoid valve to stop CO2 flow at night, preventing dangerous accumulation. Always monitor pH levels and ensure adequate surface agitation to maintain oxygen exchange.

Is this answer helpful?

A

No, these cylinders are designed for professional refilling only. You must return empty bottles to authorized dealers or gas suppliers. Attempting to refill them yourself is extremely dangerous and violates safety regulations.

Is this answer helpful?

A

The check valve prevents water from siphoning back into the CO2 line if the pump fails or pressure drops. This protects the regulator from water damage and ensures the system remains dry and functional.

Is this answer helpful?

A

While not strictly mandatory, a reactor significantly increases CO2 dissolution efficiency. Without one, bubbles may escape directly into the air. A reactor forces gas through water, maximizing absorption for better plant nutrition.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Precise fine-adjustment valve allows for accurate bubble rate control
  • Durable construction ensures long-term reliability in humid environments
  • Intuitive manual operation suitable for beginners and experts alike
  • Promotes rapid plant growth and reduces algae competition
  • Robust safety features including protective caps and secure valves
VS

Disadvantages

  • Requires careful handling due to high-pressure gas contents
  • Cylinders must be refilled periodically as they are not refillable at home
  • Initial setup cost is higher than DIY yeast-based systems
  • Needs regular leak checks to ensure safe operation
  • Heavy cylinders require careful transport using a cart
M: QW-35-FL

Product Specification

Range

CO2 supply, plant fertilization

Energy consumption

N/​A

M: QW-35-FL

Product Description

Elevate Your Aquarium with Dupla CO2 Systems

Creating a vibrant, thriving planted aquarium requires more than just good lighting and nutrients; it demands the perfect balance of carbon dioxide. The Dupla CO2 Armatur und Druckflasche set is the cornerstone for aquarists seeking professional-grade results without the complexity of industrial setups. This comprehensive kit combines a high-quality pressure cylinder with a precision regulator armature, ensuring that your aquatic plants receive a consistent supply of CO2 to fuel photosynthesis.

The heart of this system lies in its ability to maintain stable gas pressure. Whether you are running a small nano tank or a large community setup, the Dupla pressure bottle delivers reliable performance. The included armature features a fine-adjustment valve, allowing hobbyists to dial in the exact bubble rate needed for their specific biotope. This level of control prevents the common pitfalls of under-dosing or over-dosing, promoting healthy plant growth while minimizing the risk of stress to fish and invertebrates.

Safety is paramount when handling pressurized gases, and the Dupla design reflects this priority. The cylinders are built to rigorous standards, featuring robust valves and protective caps to prevent accidental damage during transport or storage. The manual operation of the system is intuitive, making it accessible even for beginners who have never worked with compressed gas before. By providing a steady stream of CO2, this equipment transforms dull, slow-growing tanks into lush underwater jungles teeming with life.

Beyond aesthetics, proper CO2 injection improves water quality and stability. It helps lower pH levels naturally and encourages faster nutrient uptake by plants, which in turn reduces algae blooms. The Dupla kit is designed for long-term use, with durable components that resist corrosion from humidity and condensation. Regular maintenance is straightforward, ensuring years of trouble-free operation. For those looking to take their planted tank hobby to the next level, this combination of reliability and ease of use makes it an essential investment.

M: QW-35-FL

© Copyright 2026 Manual.ly