Digitus DA-70613 Manual
PDF manual · 4 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Digitus DA-70613 manual using AI
Get instant AI answers from your Digitus DA-70613 manual
Ask anything about the Digitus DA-70613. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend DA-70613?
Yes No
Piper Kiehn
4 months ago
Does this socket fit standard frames if the horizontal alignment is off by a few millimeters?
Manual.ly
4 months ago
Thank you for your question. While our product is designed to be easy to install and functions perfectly, some users have noted that when installing into certain alternative frames, the horizontal alignment may sit approximately 5mm deeper than expected. We recommend checking your specific frame dimensions before installation or consulting with an electrician to ensure a perfect fit.
hcrist99
6 months ago
Is this outlet suitable for charging tablets and phones in the kitchen?
Frequently Asked Questions
No, this device must be installed by a qualified electrician to ensure safety and compliance with electrical standards.
Is this answer helpful?
The total output is 5.0V DC at 2.1A, providing a maximum of 10.5W combined across both ports.
Is this answer helpful?
No, the device is designed for indoor use only and should not be exposed to moisture or liquids.
Is this answer helpful?
Disconnect the power first, then gently wipe the surface with a damp towel. Do not use solvents.
Is this answer helpful?
Overloading may trigger the short-circuit protection, cutting off power to prevent damage or fire hazards.
Is this answer helpful?
Yes, it works with any device that charges via standard USB, provided the voltage and current requirements are met.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Integrated USB charging eliminates the need for separate adapters
- Flush-mount design maintains a sleek and unobtrusive appearance
- Built-in short-circuit protection ensures user safety during operation
- High energy efficiency reduces electricity consumption significantly
- Supports multiple device types including phones and tablets simultaneously
Disadvantages
- Requires professional installation which may add initial cost
- Not suitable for outdoor or humid environments due to safety risks
- Limited to specific wire gauge requirements for proper function
- Cannot be repaired by users if internal components fail
- Output capacity is fixed and cannot be upgraded later
Product Specification
Type
Schuko, USB
Mounting type
Flush-mounted
Socket locations
1
Protection class
IP20
Rated voltage/current
230V
Frame
white (RAL 9003), plastic, glossy
Bezel
white (RAL 9003), plastic, glossy
Features
2x USB-A charging ports, enhanced touch protection
Dimensions
2.17x2.17 in (WxH)
Depth
1.50 in
Product Description
Digitus Safety Socket for Flush-Mounting with 2 USB Ports - Read, Download & Print Free
Integrating modern technology with traditional electrical infrastructure has never been more seamless than with the Digitus Safety Socket designed specifically for flush-mounting. This innovative device transforms standard wall outlets into versatile charging stations without compromising on safety or aesthetic appeal. Ideal for homes and offices alike, this socket features two built-in USB ports that allow you to charge smartphones, tablets, and other small electronic devices directly from the wall, eliminating the need for bulky adapters cluttering your surfaces.
The installation process is straightforward but requires adherence to strict safety protocols. Before beginning any work, ensure the power supply is completely turned off to prevent accidents. The unit must be installed by a qualified electrician who can verify that the wiring meets the required specifications. Specifically, the wire cross-sectional area connecting to the power source should be between 1.5mm² and 2.5mm². Proper grounding is essential, and it is crucial not to ground through to another nearby outlet. For optimal performance and safety, installers are advised to place this unit at the end of a row of sockets rather than in the middle.
Constructed with durability in mind, this safety socket includes an integrated switch-mode power supply (SMPS) equipped with short-circuit protection. The device operates efficiently, consuming minimal power when idle while delivering a robust 5.0V DC output capable of handling up to 2.1A across both USB ports. Users should note that the total output from both USB outputs must not be exceeded to maintain safe operation. Cleaning the device is simple; just disconnect it from the power source and wipe it with a damp cloth. Never use solvents or submerge the unit in water.
This product is strictly intended for indoor use in dry environments. Attempting to repair the device yourself is dangerous and voids safety guarantees. Always rely on professional installation to ensure compliance with local electrical codes and manufacturer guidelines. By choosing the Digitus Safety Socket, you gain a reliable, efficient, and safe solution for modern connectivity needs.
Important Notes
- Do not overload the USB ports beyond their combined capacity.
- Installation must be performed by a certified electrician.
- Use only in dry indoor locations.
- Clean with a damp towel only after disconnecting power.
Pros and Cons
Pros
- Integrated USB charging eliminates the need for separate adapters.
- Flush-mount design maintains a sleek and unobtrusive appearance.
- Built-in short-circuit protection ensures user safety during operation.
- High energy efficiency reduces electricity consumption significantly.
- Supports multiple device types including phones and tablets simultaneously.
Cons
- Requires professional installation which may add initial cost.
- Not suitable for outdoor or humid environments due to safety risks.
- Limited to specific wire gauge requirements for proper function.
- Cannot be repaired by users if internal components fail.
- Output capacity is fixed and cannot be upgraded later.
Frequently Asked Questions
Can I install this myself?
No, this device must be installed by a qualified electrician to ensure safety and compliance with electrical standards.
What is the maximum power output for the USB ports?
The total output is 5.0V DC at 2.1A, providing a maximum of 10.5W combined across both ports.
Is this socket waterproof?
No, the device is designed for indoor use only and should not be exposed to moisture or liquids.
How do I clean the socket?
Disconnect the power first, then gently wipe the surface with a damp towel. Do not use solvents.
What happens if I overload the USB ports?
Overloading may trigger the short-circuit protection, cutting off power to prevent damage or fire hazards.
Does it work with all phone models?
Yes, it works with any device that charges via standard USB, provided the voltage and current requirements are met.
Search for 67,706 Manuals online
Type-in Brand or Model
beate26
9 months ago
Does this outlet fit flush with an existing wall frame? One review says the horizontal is about 5 mm deeper when installed in another frame.
Manual.ly
9 months ago
The about-5 mm offset usually comes from differences in the surrounding wall frame or mounting accessories, not from the outlet itself. To get a flush look, make sure the outlet is used with a compatible frame/adaptor for your specific system and that the flush-mount depth matches your wall box. If your existing frame positions the outlet deeper, you may need the matching frame kit or a suitable spacer/adapter to align it. If you tell us your frame type (brand/system) and mounting setup, we can help you identify the correct compatible part so it sits correctly.