Manual.ly Logo

DeWalt DW055PL Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 20

Loading...
a4792d1083f34b42583909bb40d13ac066fc page 3
3
E
Contents
• User Safety
• Charging the Battery
• Using the Tool
• Warranty
• Specications
Retain all sections of this manual for future
reference.
User Safety
WARNING:
Carefully read the Safety Instructions
and Product Manual before using
this product. The person responsible
for the product must ensure that all
users understand and adhere to these
instructions.
WARNING:
The following label information is
placed on your laser tool to inform you
of the laser class for your convenience
and safety (Figure
B
).
Symbol Meaning
V Volts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser
WARNING: To reduce the risk of
injury, user must read this
instruction manual and the
safety manual.
WARNING: LASER RADIATION.
DO NOT STARE INTO BEAM.
Class 2 Laser Product.
The DW055PL tool emits a visible laser
beam, as shown in Figure
A
1
. The laser
beam emitted is Laser Class 2 and complies
with 21 CFR 1040.10 and 1040.11 except
for conformance with IEC 60825-1, Ed. 3,
as described in Laser Notice 56, dated May
8, 2019.
WARNING:
While the laser tool is in operation,
be careful not to expose your eyes
to the emitting laser beam (red light
source). Exposure to a laser beam
for an extended time period may be
hazardous to your eyes. Do not look
into the beam with optical aids.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identier: DW055PL
Responsible Party – U.S. Contact
Information
DEWALT
701 East Joppa Road
Towson, Maryland 21286
www.DEWALT.com

Chat with your DeWalt DW055PL manual using AI

Get instant AI answers from your DeWalt DW055PL manual

Ask anything about the DeWalt DW055PL. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend DW055PL?

Yes No

Frequently Asked Questions

A

Locate the port cover on the bottom of the tool and pull it up. Insert the flat side of the USB Recharge Cable into the port. Connect the USB end to a power outlet or computer. Wait approximately 2.5 hours for a full charge cycle.

Is this answer helpful?

A

The device measures from 6.5 inches to 55 feet, which translates to 0.165 meters up to 16.75 meters. Accuracy is typically 1/4 inch or 6mm.

Is this answer helpful?

A

It is a Class 2 laser product. You must not stare into the beam. Extended exposure may be hazardous. Do not look into the beam with optical aids like binoculars.

Is this answer helpful?

A

Yes, after taking a measurement, press and hold the button for 3 seconds. It will cycle between decimal feet, fractional feet, meters, and inches.

Is this answer helpful?

A

Battery life supports up to 1000 measurements. If not used, it lasts up to 30 days. The unit automatically turns off after 120 seconds of inactivity.

Is this answer helpful?

A

Warranty information is available on the official website. Retain all safety sections of the documentation for future reference regarding claims or support.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • USB rechargeable battery eliminates need for disposable units
  • Measures distances up to 55 feet with 1/16 inch resolution
  • IP54 rating provides resistance to dust and water splashes
  • Auto power off feature saves energy after 120 seconds
  • Lightweight at 1.12oz for easy one-hand operation
VS

Disadvantages

  • Class 2 laser requires caution and prohibits staring into beam
  • Limited to 55ft range compared to higher end models
  • Cannot be used with optical aids due to safety risks
  • Units must be manually changed by holding button for 3 seconds
  • Battery requires 2.5 hours for full charging cycle
M: qwen/qwen3.5-flash-20260224

Product Specification

Laser

620-690nm (red), Class 2

Measuring Range

52.49 ft

Accuracy

0.02 in/3.28 ft

Features

Soft grip, Automatic power-off after 2 min

Power Supply

Battery powered (3.7 V, Li-Ion)

Weight

1.13 oz

M: qwen/qwen3.5-flash-20260224

Product Description

Professional Measurement Solutions

Enhancing Workspace Efficiency with DeWalt Tools

Finding the right equipment for precise tasks remains a top priority for tradespeople and DIY enthusiasts alike. The DeWalt DW055PL Laser Distance Measurer brings enhanced accuracy to your workflow without cumbersome traditional tape measures. Operating this device safely requires attention to specific guidelines found within the official documentation. Users should understand the safety protocols regarding laser radiation before beginning any project. The tool emits a visible laser beam that calculates distance efficiently.

Range capabilities extend from 6.5in up to 55ft indoors. This metric allows for room sizing and construction planning with confidence. Measurement resolution reaches 1/16in or 1mm depending on settings. Display windows present clear data for immediate review. Power management features include an automatic switch off function after 120 seconds of inactivity. Battery life supports up to 1000 measurements on a single charge cycle. Charging involves connecting a USB Recharge Cable to the bottom port. This modern convenience eliminates the need for standard alkaline replacements. Fully charge before initial use for best results. Wait approximately 2.5 hours for a full cycle. Never use non-certified power adapters to prevent injury hazards.

Changing units between feet, meters, and inches takes mere seconds. Holding the activation button cycles through decimal, fractional, and metric displays. Re-measuring is straightforward as the display clears automatically for new inputs. Safety warnings emphasize not staring into the beam to prevent eye damage. Class 2 laser classification mandates adherence to operating limits. Weather resistance reaches IP54 for protection against dust and water splashes. Operating temperatures span from freezing up to 104 degrees Fahrenheit. Storage limits are slightly wider to handle varied environments. Do not use optical aids to view the beam directly.

Warranty terms are accessible online for registered owners. Contact information lists the corporate headquarters for support needs. Compliance with FCC rules ensures no harmful interference occurs during operation. Canada and EU directives confirm regulatory adherence for international markets. Lightweight design at 1.12oz ensures minimal fatigue during extended use. Dimensions fit easily into tool cases or pockets. This device represents a significant upgrade over analog methods. Reliability and speed define the user experience. Professionals can trust the consistency provided by this engineering feat. Home improvement projects benefit from reduced measurement errors. It helps you avoid costly material waste by ensuring exact fits. Unique identifiers track the specific serial numbers for security. Ensure you retain all safety sections for future reference.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly