Manual.ly Logo

Dennerle Crystal-Line CO2 Long-term Test Maxi Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 2

Loading...
eb2c05552c66fbe9bfdcfb926c2da3821f5d page 1
Crystal-Line
CO
2
Langzeittest Mini / Maxi
Z
ur permanenten, exakten Kontrolle des CO
2
-
Gehaltes im Aquarium
Herzlichen Glückwunsch zum Kauf dieses hochwertigen Aquaristikproduktes aus dem Hause DENNERLE. Bitte beachten Sie die Anwendungshinweise,
damit das Produkt seine volle Leistung entfalten kann. DENNERLE wünscht Ihnen viel Spaß und Freude an Ihrem Aquarium!
S
icherheitshinweise
Glasgeräte stets vorsichtig behandeln. Glasbruch kann zu Verletzungen führen. Von Kindern fernhalten.
1 So funktioniert der Crystal-Line CO
2
-Langzeittest
Das CO
2
diffundiert aus dem Aquarienwasser in den Testbehälter und löst sich im CO
2
Special-Indicator. Je nach CO
2
-Gehalt reagiert der Indikator
mit einer Farbänderung:
• Blau = zu wenig CO
2
• Grün = CO
2
optimal (ca. 20 mg/l)
• Gelb = zu viel CO
2
Im Gegensatz zu herkömmlichen CO
2
-Tests, bei denen der Indikator mit Aquarienwasser gemischt wird, arbeitet der Crystal-Line CO
2
-Langzeittest
m
it dem direkt gebrauchsfertigen DENNERLE Special-Indikator. Vorteile: Der Test zeigt den CO
2
-
Gehalt immer richtig an – unabhängig von anderen
Säuren im Aquarienwasser (z.B. Huminsäuren). Auch Änderungen der Karbonathärte durch Aufhärtung, Verdunstung oder Wasserwechsel haben
keinen Einfluss mehr auf die Messgenauigkeit.
1. Saugernippel des Testbehälters
etwas anfeuchten und Sauger
vorsichtig
aufstecken.
2. Indikator in der Ampulle herunter-
schütteln, so dass sich kein
Indikator im Ampullenhals befin-
det. Ampulle durch Abdrehen der
Verschlusslasche öffnen.
3. Gesamten Ampullen-Inhalt in den
Testbehälter füllen.
4. Testbehälter vorsichtig umdrehen
und mit Hilfe des Saugers an einer
gut sichtbaren Stelle mit leichter
Wasserströmung senkrecht im
Aquarium befestigen.
5. Farbvergleichs-Skala außen auf
die Aquarienscheibe kleben.
Bitte beachten: Weil das CO
2
eine gewisse Zeit braucht, um in den Indikator hinein zu diffundieren, reagiert die Farbanzeige auf Änderungen
des CO
2
-Gehaltes jeweils mit einigen Stunden Verzögerung. Erhöhen Sie die CO
2
-Zugabemenge deshalb immer nur in kleinen Schritten über
mehrere Tage verteilt, bis der optimale CO
2
-Gehalt eingestellt ist.
3 Die richtige CO
2
-Menge
DENNERLE empfiehlt für prächtigen Pflanzenwuchs einen CO
2
-Gehalt von 20 bis 25 mg/l. Da die benötigte Blasenzahl von verschiedenen Fakto-
ren abhängt, muss die CO
2
-Zugabemenge für jedes Aquarium individuell ermittelt werden.
Faustregel für die Grundeinstellung einer CO
2
-Düngeanlage:
Beginnen Sie mit ca. 10 Blasen pro Minute pro 100 l Aquarienwasser, das heißt
für ein 200 l-Aquarium zum Beispiel mit 2 x 10 = 20 Blasen pro Minute. Kontrollieren Sie die CO
2
-Zugabe und den CO
2
-Gehalt im Aquarienwasser
regelmäßig und passen Sie die CO
2
-Zugabemenge gegebenenfalls an.
4 Verwendung als pH-Langzeittest
Unter der Voraussetzung, dass sich keine anderen, maßgeblich pH-beeinflussenden Substanzen im Wasser befinden (z.B. Huminsäuren, Nitrat, pH
Minus-Präparate) kann man mit dem Crystal-Line CO
2
-Langzeittest auch den pH-Wert im Aquarium überwachen.
Dazu:
• Karbonathärte des Aquarienwassers messen (Tests im Fachhandel).
• Entsprechende Farbvergleichs-Skala außen an die Aquarienscheibe kleben.
An der Farbskala kann man nun direkt den pH-Wert des Aquarienwassers ablesen.
Karbonathärte regelmäßig messen und immer entsprechende Farbskala verwenden!
5 CO
2
Special-Indicator austauschen
Um stets eine möglichst schnelle und exakte Farbreaktion zu gewährleisten, empfehlen wir, den
Testbehälter alle 4-6 Wochen
mit frischem CO
2
Special-Indicator zu füllen. Der verbrauchte
Indikator kann über die Hauskanalisation entsorgt werden.
8 Crystal-Line Ersatzteile und nützliches Zubehör (beim Fachhandel erhältlich)
2985
CO
2
-Langzeittest Mini
2986
CO
2
-Langzeittest Maxi
2980
CO
2
-Diffusor-Topf Mini
2
981
C
O
2
-
Diffusor-Topf Maxi
2982
CO
2
-Diffusor-Pfeife Mini
2983
CO
2
-Diffusor-Pfeife Maxi
2987
CO
2
-Rücklaufsicherung
2984
CO
2
-Blasenzähler
2990
CO
2
-Schlauch, transparent, 2 m
2
989
L
onglife-Sauger, transparent, groß, 2 Stück
2988
Longlife-Sauger, transparent, klein, 2 Stück
3041
CO
2
Special-Indicator, 5 Ampullen
Vertrieb: DENNERLE GmbH, D-66957 Vinningen
Kundenservice: DENNERLE GmbH, Industriestrasse 4, D-66981 Münchweiler
www.dennerle.de
Crystal-Line
Mini / Maxi Test CO
2
longue durée
Pour le contrôle permanent et précis du taux de CO
2
dans l'aquarium
D
F
Nous vous remercions de votre confiance. Vous avez acheté un produit d’aquariophilie de première qualité conçu par DENNERLE. Veuillez respecter les
consignes d’utilisation pour que le produit soit pleinement efficace. DENNERLE vous souhaite beaucoup de plaisir et de bonheur avec votre aquarium !
Instructions de sécurité
Manipuler toujours les appareils en verre avec précaution. Le bris de verre peut provoquer des blessures. Tenir hors de portée des enfants
.
1 Fonctionnement du test CO
2
longue durée Crystal-Line
Le CO
2
passe de l’eau de l'aquarium dans l´entonnoir-test et se dissout dans l’indicateur spécial CO
2
. Selon le taux de CO
2
, l'indicateur spécial
réagit par un changement de couleur :
• bleu = manque de CO
2
• vert = CO
2
optimal (env. 20 mg/l)
• jaune = excès de CO
2
Contrairement aux tests CO
2
conventionnels où l’indicateur est mélangé à l’eau de l'aquarium, le test CO
2
longue durée Crystal-Line travaille avec
l’indicateur spécial CO
2
de DENNERLE qui est directement prêt à l’emploi. Avantages : Le test indique toujours le taux de CO
2
exact, indépendam-
ment d’autres acides contenus dans l’eau de l’aquarium (p.ex. des acides humiques). Même les changements dans la dureté carbonatée, par
durcissement, évaporation ou changement d’eau, n’ont plus aucune influence sur la précision des mesures.
1. Humidifiez légèrement les
embouts et fixez-y prudemment
les ventouses.
2. Secouezl’ampoule pour faire des-
cendre l’indicateur, de manière à
ce qu’aucun indicateur ne se
trouve dans le col de l’ampoule.
Ouvrez l'ampoule en tournant le
collier de fermeture.
3. Versez tout le contenu de l’am-
poule dans l´entonnoir-test.
4. Retournez prudemment l´enton-
noir-test pour faire couler l´indica-
teur dans la boule de récupération
et, à l'aide de la ventouse, fixez-le
à la verticale dans un endroit bien
visibledel'aquarium,avecunléger
courant d'eau.
5. Collez l'échelle colorimétrique sur
la face extérieure de la vitre de
l'aquarium.
Important : Comme le CO
2
a besoin d'un certain temps pour diffuser jusque dans l'indicateur, l'affichage couleur réagit toujours avec quelques
heures de retard aux changements du taux de CO
2
. C’est pourquoi vous devez toujours augmenter la quantité de CO
2
ajoutée par petits paliers,
répartis sur plusieurs jours, jusqu’à obtenir le taux de CO
2
optimal.
3 La bonne quantité de CO
2
DENNERLE recommande, pour une végétation superbe, un taux de CO
2
de 20 à 25 mg/l. Comme le nombre de bulles nécessaire dépend de plusieurs facteurs,
vous devez déterminer individuellement la quantité de CO
2
à ajouter dans chaque aquarium.
Règle approximative pour le réglage de base d’une installation de fumure CO
2
: Commencez avec environ 10 bulles à la
minute par 100 litres d'eau d'aquarium, donc pour un aquarium de 200 litres avec 2 x 10 = 20 bulles à la minute. Contrôlez régulièrement l’ad-
jonction de CO
2
et la teneur en CO
2
dans l'eau de l’aquarium et adaptez éventuellement la quantité de CO
2
ajoutée.
4 Utilisation comme test pH longue durée
A condition que l'eau ne contienne pas d'autres substances qui influencent fortement le pH (p. ex. des acides humiques, des nitrates, des préparations pour diminuer le pH),
le test CO
2
longue durée Crystal-Line permet aussi de surveiller le pH de l'aquarium.
Pour ce faire :
• Mesurez la dureté carbonatée de l'eau de l'aquarium (tests disponibles en animalerie).
• Collez l'échelle colorimétrique correspondante sur la face extérieure de la vitre de l'aquarium.
L
'échelle colorimétrique permet alors de lire directement le pH de l'eau de l'aquarium.
Mesurez régulièrement la dureté carbonatée et utilisez toujours l'échelle colorimétrique correspondante !
5 Remplacement de l'indicateur spécial CO
2
Afin de garantir toujours une réaction de couleur très rapide et précise, nous vous recommandons de remplacer toutes les 4 à 6 semaines
l'indicateur spécial CO
2
dans l´entonnoir-test. Vous pouvez jeter l’indicateur usé dans les canalisations.
6
Nettoyage du test CO
2
l
ongue durée
Nettoyez le test à l'eau chaude, à l'aide d'une éponge douce. N’utilisez pas de produits de nettoyage ! Si de l’eau d’aquarium ou de
distribution pénètre dans l´entonnoir-test, rincez-le bien à l’eau distillée, puis laissez-le sécher. Remplissez-le seulement ensuite d´une
nouvelle solution indicatrice.
7
Remarques particulières
• L'indicateur spécialCO
2
n'est pas nocif et ne contient pasde solvantschimiques. Évitez néanmoins tout contact prolongé avecla peau et lesyeux.
• Le liquide indicateur qui s'écoule par mégarde dans l'eau de l'aquarium est sans danger pour les poissons, plantes et autres occupants.
• Protégez l'indicateur spécial CO
2
du soleil, de la chaleur et du gel. Stockez toujours les ampoules à l'abri de la lumière. Le niveau de rem-
plissage est lié au processus technique.
8 Pièces de rechange et accessoires utiles Crystal-Line (disponibles dans les magasins spécialisés)
2985 Mini-Test CO
2
longue durée
2986 Maxi-Test CO
2
longue durée
2980 Mini-Pot de diffusion CO
2
2981 Maxi-Pot de diffusion CO
2
2982 Mini-Pipe de diffusion CO
2
2983 Maxi-Pipe de diffusion CO
2
2987 Protection anti-retour CO
2
2984 Compte-bulles CO
2
2990 Tuyau CO
2
, transparent, 2 m
2989 Ventouses Longlife, transparentes, grande taille, 2 pièces
2988 Ventouses Longlife, transparentes, petite taille, 2 pièces
3041 Indicateur spécial CO
2
, 5 ampoules
Distribution : DENNERLE GmbH, D-66957 Vinningen
Service après-vente : DENNERLE GmbH, Industriestrasse 4, D-66981 Münchweiler • www.dennerle.de
Crystal-Line
Mini/Maxi CO
2
long-term test
For the continuous, exact control of CO
2
content in the aquarium
GB
Congratulations on buying this high-quality aquarium product from DENNERLE. Please observe the instructions for use, so as to make full use of
the product’s potential. DENNERLE wishes you lasting enjoyment from your aquarium!
Safety instructions
Always treat glass equipment with due care. Broken glass may cause injuries. Keep away from children.
1 How the Crystal Line CO
2
long-term test works
The CO
2
diffuses out of the aquarium water into the test container and dissolves in the special CO
2
indicator. The colouring of the indicator varies
according to the CO
2
content:
• Blue = not enough CO
2
• Green = CO
2
level ideal (approx. 20 mg/l)
• Yellow = too much CO
2
In contrast to conventional CO
2
tests, in which the indicator is mixed with aquarium water, the Crystal Line CO
2
long-term test uses the ready-to-
use special indicator from DENNERLE. Advantages: The test indicates the CO
2
content correctly at all times – independently of other acids in the
aquarium water (e.g. humic acids). Measuring accuracy now also remains unaffected by any changes in carbonate hardness as a result of increa-
ses in the hardness of the water, evaporation or water changing.
1. Moisten the nipple of the test
container slightly
and attach
suction clip with due care.
2. Shake the indicator down in the
ampoule so that there is no
indicator in the neck of the am-
poule. Open ampoule by twisting
off the sealing tab.
3. Pour the entire contents of the am-
poule into the test container.
4. Carefully turn the test container
around and use the suction clip to
secure it in an upright position at
a clearly visible point in the aqua-
rium where a gentleflow of water
prevails.
5. Stick the colour matching scale to
the outside of the front pane.
6 CO
2
Langzeittest reinigen
Mit warmem Wasser und weichem Schwamm. Keine Reinigungsmittel verwenden! Falls Aquarienwasser oder Leitungswasser in das Innere
des Testbehälters gelangt ist: Mit destilliertem Wasser gut ausspülen und trocknen lassen. Dann erst mit frischem Indikator füllen.
7 Besondere Hinweise
• Der CO
2
Special-Indicator ist ungefährlich und frei von chemischen Lösungsmitteln. Trotzdem längeren Hautkontakt und Augenkontakt
vermeiden.
• Versehentlich ins Aquarienwasser gelangter Indikator ist für alle Fische, Pflanzen und andere Aquarienbewohner harmlos.
• CO
2
Special-Indicator vor Sonne, Hitze und Frost schützen. Ampullen stets lichtgeschützt lagern. Füllhöhe technisch bedingt.
2
CO
2
-Langzeittest füllen und in Betrieb nehmen
2 Remplissage et mise en service du test CO
2
longue durée
2 Filling and using the CO
2
long-term test

Chat with your Dennerle Crystal-Line CO2 Long-term Test Maxi manual using AI

Get instant AI answers from your Dennerle Crystal-Line CO2 Long-term Test Maxi manual

Ask anything about the Dennerle Crystal-Line CO2 Long-term Test Maxi. Answers come from this manual, with the pages they are based on.

Crystal-Line CO2 Long-term Test Maxi Maintenance Schedule

Remind me when maintenance is due
Every 4-6 weeks
Replace CO2 special indicator

Fill the test container with fresh CO2 special indicator every 4 to 6 weeks to ensure fast and exact color reaction.

As needed
Clean test container

Clean with warm water and a soft sponge. Do not use cleaning agents. Rinse with distilled water if tap water enters.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Crystal-Line CO2 Long-term Test Maxi?

Yes No

Frequently Asked Questions

A

CO2 diffuses from the aquarium water into the test container and dissolves in the special indicator gel. The color changes based on the concentration without mixing water with the solution.

Is this answer helpful?

A

Blue means too little CO2, green indicates optimal levels around twenty milligrams per liter, and yellow signals too much CO2 that could stress aquatic life.

Is this answer helpful?

A

To guarantee the quickest and most exact color response, fill the test container with fresh special CO2 indicator every four to six weeks.

Is this answer helpful?

A

The special indicator is harmless for all fish and plants if accidentally spilled into the water, though prolonged skin contact should be avoided.

Is this answer helpful?

A

Yes, provided there are no other pH-affecting substances like humic acids. You must measure carbonate hardness and use the matching color scale to read the pH directly.

Is this answer helpful?

A

Begin with approximately ten bubbles per minute per one hundred liters of water and adjust gradually over several days based on color changes.

Is this answer helpful?

A

Clean with warm water and a soft sponge. Do not use cleaning agents. Rinse thoroughly with distilled water if aquarium water entered the inside before refilling.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Independent of carbonate hardness changes and humic acids for consistent accuracy.
  • Ready-to-use ampoules eliminate mixing errors and save time on setup.
  • Color scale allows for easy external viewing without tank disturbance.
  • Indicator liquid remains harmless to fish and plants if accidentally spilled.
  • Replaces multiple consumable drop tests saving money over time.
VS

Disadvantages

  • Glass vessel requires careful handling to avoid breakage injuries.
  • Indicator requires replacement every four to six weeks for optimal performance.
  • Color reaction has a delay of several hours for diffusion.
  • Accurate pH monitoring requires knowledge of carbonate hardness first.
  • Ampoules must be stored away from light and heat to maintain integrity.
M: qwen/qwen3.5-flash-20260224

Product Specification

Application

CO2 supply, Plant fertilization, Water parameters

Type

CO2 continuous test (crystal glass), CO2/pH indicator solution

Specifications

2x 1.3ml test liquid, 2x 1 month duration

Suitability

Freshwater

Consumables

Dennerle CO2 Special-Indicator + pH

M: qwen/qwen3.5-flash-20260224

Product Description

Dennerle Crystal-Line CO2 Long-term test maxi Manual Overview

Achieving perfect plant growth in your aquarium requires precise monitoring of carbon dioxide levels, and the Dennerle Crystal-Line CO2 Long-term test maxi Manual represents the ultimate tool for hobbyists seeking uncompromising accuracy without unnecessary complexity. This innovative testing device ensures permanent and exact control of gas concentrations directly within your tank environment, eliminating guesswork from your daily routine. Unlike traditional drop tests that require mixing water with a liquid indicator, this system utilizes a unique closed loop design where CO2 naturally diffuses through a specialized gel indicator contained within a transparent vessel. The result is a stable color readout that remains unaffected by interference from other water parameters such as humic acids or fluctuating carbonate hardness caused by evaporation or water changes.

Color interpretation remains incredibly intuitive for all skill levels. Blue signals insufficient gas concentration, which might stunt plant development. Green indicates the optimal range around 20 milligrams per liter required for lush vegetation and healthy fish. Yellow warns critically of excess levels that could stress aquatic life. Installation is straightforward using a sturdy suction cup attached securely to the glass, allowing the included color scale to be glued externally for continuous observation from the outside. Users receive pre-filled ampoules containing the ready-to-use indicator solution, which eliminates the risk of mixing errors often found in DIY test solutions. Maintenance is simple, involving refreshing the indicator every four to six weeks to ensure rapid and reliable reaction times during use. Disposing of used liquid is safe via standard household drainage protocols.

For beginners establishing a new setup, Dennerle suggests a general rule of starting CO2 supplementation with approximately 10 bubbles per minute for every 100 liters of water volume in the tank. Adjustments should be made gradually over several days since the diffusion process naturally causes a slight delay of several hours before the color changes reflect new settings. This product is essential for maintaining delicate biological balance, preventing fish stress while maximizing photosynthesis. Additional accessories like specialized diffuser pots and bubble counters complement the system for total aquarium management. Whether using the Mini or Maxi version, the high reliability of Dennerle products guarantees peace of mind for every aquarist. Regular monitoring helps prevent catastrophic mistakes in aquascaping or livestock health that cost time and money. The versatility extends to monitoring pH values when carbonate hardness data is known, adding dual functionality to your equipment. Trust this high-quality aquarium product for lasting enjoyment of your aquatic environment and plant success. Safety instructions emphasize treating glass equipment with care. The indicator liquid stays harmless to inhabitants even if accidentally spilled, though prolonged skin contact should be avoided. Store ampoules shielded from direct sunlight. The Maxi model often suits larger tanks better due to visibility. Consistency in testing allows aquarists to track seasonal changes. By adhering to these guidelines, your aquarium ecosystem thrives under stabilized conditions. This testing method saves money over time compared to consumable drop test bottles used daily. It integrates seamlessly with existing CO2 dosing equipment found in specialist retailers. Ultimately, investing in reliable monitoring tools separates successful aquascaping from struggling setups. The Dennerle brand commitment to quality ensures that every component performs exactly as described without hidden variables affecting your results.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly