Manual.ly Logo

D.A.S. Vantec Series Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: QW-35-FL
page

/ 16

Loading...
54ed3ae9259ba4c768c010820c0da6246fca page 3
3
Precauciones de Seguridad
Safety Precautions
Cajas acústicas pasivas / Passive loudspeaker enclosures
Manual del Usuario / vantec series / User’s Manual
Conserve y lea todas estas instrucciones.
Siga todas las advertencias.
El signo de exclamación dentro de un triángulo indica la
existencia de componentes internos cuyo reemplazo puede
afectar a la seguridad.
Keep these instructions.
Heed all warnings. Follow all instructions.
The exclamation point inside an equilateral triangle indicates the
existence of internal components whose substitution may affect
safety.
El doble cuadrado indica equipo de Clase II. The double square indicates Class II device.
Limpie con un paño seco. No use limpiadores con disolventes.
Las especificaciones se encuentran en la etiqueta de la parte
posterior del producto.
The specifications can be found on the rear label of the product.
Clean only with a dry cloth. Do not use any solvent based
cleaners.
No existen partes ajustables por el usuario en el interior de este
equipo. Cualquier operación de mantenimiento o reparación
debe ser realizada por personal cualificado. Es necesario el
servicio técnico cuando el aparato se haya dañado de alguna
forma, tal como que haya caído líquido o algún objeto en el
interior del aparato, haya sido expuesto a lluvia o humedad, no
funcione correctamente o haya recibido un golpe.
No user serviceable parts inside. Refer all servicing to qualified
service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally or has been dropped.
Equipo diseñado para funcionar entre -25ºC y 45ºC. La
humedad relativa máxima del 95%.
Working temperature ranges from -25ºC to 45ºC. The maximum
relative humidity of 95%.
No exponga este equipo a la lluvia o humedad. No exponga el
equipo a salpicaduras ni coloque sobre él objetos que
contengan líquidos, tales como vasos y botellas. Equipo IP-20.
Do not expose this device to rain or moisture. Do not place any
objects containing liquids, such as bottles or glasses, on the top
of the unit. Do not splash liquids on the unit. IP-20 equipment.
No emplace altavoces en proximidad a equipos sensibles a
campos magnéticos, tales como monitores de televisión o
material magnético de almacenamiento de datos.
Do not place loudspeakers in proximity to devices sensitive to
magnetic fields such as television monitors or data storage
magnetic material.
Este símbolo indica que el presente producto no puede ser
tratado como residuo doméstico normal, sino que debe
entregarse en el correspondiente punto de recogida de equipos
eléctricos y electrónicos.
This symbol on the product indicates that this product should
not be treated as household waste. Instead it shall be handed
over to the applicable collection point for the recycling of
electrical and electronic equipment.
El cableado exterior conectado al equipo requiere de su
instalación por una persona instruida o el uso de cables flexibles
ya preparados.
The outer wiring connected to the device requires installation by
an instructed person or the use of a flexible cable already
prepared.
El equipo cuenta con dos conectores de entrada en paralelo
para facilitar la conexión de varias cajas en paralelo.
Note that the two Speakon input connectors are wired in parallel
to provide easy parallel connection of several enclosures.
El colgado del equipo sólo debe realizarse utilizando los herrajes
de colgado recomendados y por personal cualificado. No
cuelgue la caja de las asas.
The appliance should be flown only from the rigging points and
by qualified personnel. Do not suspend the box from the
handles.
VANTEC-12------------->115 cm
VANTEC-15------------->105 cm
VANTEC-12------------->115 cm
VANTEC-15------------->105 cm
Para las cajas con vaso para trípode, la altura máxima de
seguridad desde el suelo a la base de la caja montada sobre
trípode modelo TRD-2, con pies a 55 cm del eje del trípode, es:
For enclosures with tripod socket, the maximum safety height
from floor to bottom of enclosure when mounting on a TRD-2
tripod, with legs spread 55cm from the central pole, is:
55 cm

Chat with your D.A.S. Vantec Series manual using AI

Get instant AI answers from your D.A.S. Vantec Series manual

Ask anything about the D.A.S. Vantec Series. Answers come from this manual, with the pages they are based on.

Vantec Series Maintenance Schedule

Regularly
Inspect hanging hardware and replace suspect units

Hanging hardware should be regularly inspected. Replace suspect units if in doubt to avoid injury. Implement an inspection and maintenance program on flying elements.

Show in the manual (page 14)
As needed
Clean enclosure with a dry cloth

Clean only with a dry cloth. Do not use any solvent based cleaners.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Vantec Series?

Yes No

Frequently Asked Questions

A

All products are warrantied for a period of two years from the date of purchase. The warranty covers manufacturing defects but excludes damage from incorrect use.

Is this answer helpful?

A

Yes, the VANTEC-12 and VANTEC-15 models feature a 35 mm tripod socket allowing for stand mounting with angles of 0 or -10 degrees.

Is this answer helpful?

A

Yes, models feature built-in rigging points. However, flying must be done by qualified personnel following the recommended safety factors and local regulations.

Is this answer helpful?

A

The equipment is designed to function between -25 and 45 degrees Celsius with a maximum relative humidity of 95 percent.

Is this answer helpful?

A

Servicing must be performed exclusively by the manufacturer or an authorized service center. User repairs will void the warranty.

Is this answer helpful?

A

The units are IP-20 rated and should not be exposed to rain or moisture. Outdoor use requires additional weather protection.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Durable Birch plywood construction provides high rigidity and low resonance.
  • Titanium diaphragm compression drivers offer high frequency clarity.
  • Parallel Speakon inputs simplify daisy-chaining multiple speaker cabinets.
  • Integrated rigging points allow for safe overhead suspension installation.
  • Wide power handling range suits various venue sizes and demands.
VS

Disadvantages

  • Heavy weight requires careful transportation and rigging planning.
  • Passive design necessitates separate external amplifier equipment.
  • Rigging installation requires qualified personnel for safety compliance.
  • IP-20 rating means the unit is not waterproof or moisture resistant.
  • Warranty claims require valid proof of purchase and authorized service.
M: QW-35-FL

Product Specification

Amplification

Passive

M: QW-35-FL

Product Description

Professional Audio Reliability with D.A.S. Vantec

Introduction to the Series

The D.A.S. Vantec Passive pc Manual is frequently consulted by sound engineers seeking reliable equipment for professional environments. These speakers are designed for sound reinforcement where clarity and power are essential for live performances. The series integrates advanced acoustic engineering with rugged construction methods to withstand heavy touring schedules. Whether in a dark club, a stadium, or on a stage, the Vantec series provides the definition needed for a successful performance. The design heritage reflects real-world experience in high-profile venues.

Build Quality and Design

Constructed from high-grade Birch plywood, the cabinets offer superior rigidity and acoustic stability without resonating unwanted frequencies. An environmentally friendly black paint finish protects the exterior from scuffs and wear during extensive touring routes. Steel grilles safeguard the internal components from physical impact and corrosion using powder coat finishes. Two bar handles facilitate movement during setup and teardown processes across various venues with different stage layouts.

Acoustic Performance and Models

Acoustically, the system utilizes a two-way configuration for optimal sound distribution throughout the room. Titanium diaphragm drivers handle high frequencies with exceptional detail and durability compared to standard competitors. Low frequencies are powered by transducers sized up to 18 inches for deep bass response and punch. The VANTEC-215 features dual 15-inch drivers for increased Sound Pressure Level capability in large spaces. Subwoofer models like the VANTEC-218 utilize long excursion drivers for maximum low-end power and precise reproduction.

Safety and Rigging

Safety is paramount during operation and installation to protect the public and crew members. The manual details strict safety precautions regarding mounting and rigging on suspension structures. Flying points must be inspected regularly for signs of wear or metal fatigue. Working load limits are strict and based on independent laboratory testing results. Personnel must follow local regulations when deploying overhead loads above the audience. Hanging should only be done by qualified staff using recommended hardware and slings.

Electrical Specifications and Configuration

Electrical specifications include parallel Speakon inputs for flexible wiring and daisy-chaining of additional cabinets. Users should match amplifiers to power handling ratings carefully to avoid damage to the voice coils. Impedance loads and frequency ranges vary significantly by model selection and system configuration. Proper gain staging ensures optimal performance without distortion or overheating the compression drivers. Systems can be bi-amplified or bi-amped depending on the signal routing requirements.

Maintenance and Warranty

Maintenance should be handled by qualified technicians only to preserve safety standards and performance metrics. The warranty covers manufacturing defects for two years from the official purchase date. Proof of invoice is required for any claims to be processed effectively by the manufacturer. Internal components are non-serviceable by the user due to high voltage risks and safety regulations. Always store the unit dry and at ambient temperatures to prevent paint or internal damage.

Operating Conditions

The equipment is designed to function between negative twenty-five degrees and forty-five degrees Celsius. Maximum relative humidity is ninety-five percent without condensation exposure. Liquid exposure should be avoided at all times as the unit is IP-20 rated. Outdoor use requires additional protection beyond the unit rating and weather conditions. Always protect against direct sunlight and moisture ingress to ensure longevity.

Conclusion

Reviewing the D.A.S. Vantec Passive pc Manual is crucial for new operators to ensure compliance. It ensures safety compliance and proper usage parameters for the hardware throughout its lifecycle. Following these guidelines extends the lifespan of the equipment significantly for future events.

M: QW-35-FL

© Copyright 2026 Manual.ly