Manual.ly Logo

D.A.S. Action Series Manual

0.0 · 0 Ratings

PDF manual · 19 Pages

English

M: OA-GPT-5-NAN
page

/ 19

Loading...
5073ed0e00be249ae8eeadda386860df5d1a page e
RIGGING
This manual contains needed information for
flying DAS Audio line array systems, description of
the elements and safety precautions. To perform
any operations related to flying the system, read
the present document first, and act on the
warnings and advice given. The goal is to allow the
user to become familiar with the mechanical
elements required to fly the acoustic system, as
well as the safety measures to be taken during
set-up and teardown.
Only experienced installers with adequate
knowledge of the equipment and local safety
regulations should fly speaker boxes. It is the
user's responsibility to ensure that the systems to
be flown (including flying accessories) comply with
state and local regulations.
The working load limits in this manual are the
results of tests by independent laboratories. It is
the user's responsibility to stay within safe limits. It
is the user's responsibility to follow and comply
with safety factors, resistance values, periodical
supervisions and warnings given in this manual.
Product improvement by means of research and
development is on going at D.A.S. Specifications
are subject to change without notice.
It is common practice to apply 5:1 safety
factors for enclosures and static elements. For
slings and elements exposed to material fatigue
due to friction and load variation the following
ratios must be met; 5:1 for steel cable slings, 4:1
for steel chain slings and 7:1 polyester slings.
Thus, an element with a breaking load limit of
1000 kg may be statically loaded with 200 kg (5:1
safety factor) and dynamically loaded with 142 kg
(7:1 safety factor).
When flying a system, the working load must
be lower than the resistance of each individual
flying point in the enclosure, as well as each box.
Hanging hardware should be regularly inspected
and suspect units replaced if in doubt. This is
important to avoid injury and absolutely no risks
should be taken in this respect. It is highly
recommended that you implement an inspection
and maintenance program on flying elements,
including reports to be filled out by the personnel
that will carry out the inspections. Local
regulations may exist that, in case of accident,
may require you to present evidence of inspection
reports and corrective actions after defects were
found.
Warnings
Absolutely no risks should be taken with
regards to public safety. When flying enclosures
from ceiling support structures, extreme care
should be taken to assure the load bearing
capabilities of the structures so that the installation
is absolutely safe. Do not fly enclosures from
unsafe structures. Consult a certified professional if
needed. All flying accessories that are not supplied
by DAS Audio are the user's responsibility. Use at
your own risk.
Introduction
Flyable action 500 series models feature 6
internal steel angles, with 2 mounting threads
each, so that 12 flying points are available (2 on
each side, 3 on the top panel and 3 on the bottom
panel and 2 on the rear panel). Eyebolt flying
points are factory sealed with M10 screws, which
are replaced with eyebolts on the flying points as
required. Flying with eyebolts is very economical
and safe, and is specially recommended for fixed
installations where the boxes are permanently
fixed.
The illustration shows the internal metal
hardware of an enclosure with eyebolt flying.
14
Manual del Usuario / action 500 series / User’s Manual

Chat with your D.A.S. Action Series manual using AI

Get instant AI answers from your D.A.S. Action Series manual

Ask anything about the D.A.S. Action Series. Answers come from this manual, with the pages they are based on.

Action Series Maintenance Schedule

Remind me when maintenance is due
Yearly
Inspect flying elements and hardware

Hanging hardware should be regularly inspected. Implement an inspection and maintenance program with reports filled out by personnel.

Show in the manual (page 14)
Yearly
Check wall mounting installation

Installation should be checked thoroughly at regular intervals to replace all deteriorated elements.

Show in the manual (page 16)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Action Series?

Yes No

Frequently Asked Questions

A

All Action 500 series products include a 24-month warranty from the date of purchase covering manufacturing defects. Warranty service must be performed by the manufacturer or authorized service centers and requires a copy of the purchase invoice.

Is this answer helpful?

A

Yes. Models include internal steel rigging points rated per flying point. Flying must be done only with recommended hardware and by qualified personnel, following the manual’s working load limits, safety factors, and angle restrictions to ensure public safety.

Is this answer helpful?

A

No. Action 500 series enclosures are rated IP-20 and should not be exposed to rain or heavy moisture. They are intended for indoor use or protected outdoor environments; avoid placing liquids on or near the units.

Is this answer helpful?

A

No. The Action passiv models are passive loudspeakers and require external power amplification. Proper amplifier selection and biamp configurations (where applicable with subs) are necessary for optimal performance.

Is this answer helpful?

A

Use M10 eyebolts and appropriately rated slings or carabiners as specified. Each eyebolt point is rated (typically 200 kg) only when load is applied in-plane; capacity drops with angle. Follow the manual’s guidance and safety factors for slings and chains.

Is this answer helpful?

A

Yes. The two Speakon input connectors are wired in parallel to facilitate easy parallel connection of multiple enclosures. Ensure amp load and cable runs are within safe limits when chaining units.

Is this answer helpful?

A

Regular inspection of flying hardware, connectors, handles, and grilles is recommended. Replace any suspect rigging elements, keep units clean with a dry cloth (no solvents), and follow local regulations requiring inspection records for installations.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Robust birch plywood construction with durable black finish for touring and installs.
  • Range of models (8"–2x15" and subs) suits monitors, mains, and subwoofer needs.
  • Built-in rigging points and tripod/pole mounts provide flexible installation options.
  • Titanium-diaphragm compression drivers deliver clear high-frequency response.
  • Speakon parallel wiring simplifies chaining multiple enclosures.
VS

Disadvantages

  • Passive design requires external amplification and proper drive configuration.
  • IP-20 rating prohibits outdoor exposure to rain or heavy moisture.
  • Flying and rigging demand qualified installers and careful load calculations.
  • No user-serviceable internal parts; warranty repairs must be authorized.
  • Eyebolt working load drops significantly at angles over 45°, limiting rigging options.
M: OA-GPT-5-NAN

Product Specification

Principle

2-way

Tweeter

1x 1"/1"

Amplification

passive

Dispersion angle

90°x60°

M: OA-GPT-54-NAN

Product Description

D.A.S. Action passiv, Stück — Manual Overview

The D.A.S. Action passiv, Stück series delivers a range of passive loudspeaker enclosures engineered for professional sound reinforcement. Built from birch plywood and finished in durable black paint, the Action 500 family includes compact stage monitors and full-range systems tailored for live sound, installs, and touring. Each enclosure uses high-quality transducers — from 8" and 12" low-frequency drivers to 15" and dual 15" configurations — paired with titanium-diaphragm compression drivers for clear, powerful high frequencies.

Product Highlights and Use Cases

These passive cabinets are designed for flexibility and reliability. Models like the ACTION-508 and ACTION-512 offer multi-angle enclosures for monitor use and tripod-mount capability via a 35 mm socket, while the ACTION-M512 focuses on low-profile stage monitoring. Larger systems such as the ACTION-515 and ACTION-525 provide greater low-end punch and higher SPL for front-of-house and larger venues. Subwoofer options (ACTION-S18 and ACTION-S218) deliver deep bass in biamped setups and allow pole-mounted full-range speakers.

Rigging features are built in for flown installations: internal steel angles with multiple M10-rated flying points let experienced installers safely suspend arrays when following load and angle guidance. The product line emphasizes professional safety practices, specifying working load limits per flying point, safety factors for slings and chains, and the necessity of qualified rigging personnel.

Design & Practical Details

The cabinets include corrosion-resistant steel grilles, ergonomic handles, and stand- or pole-mount options. Speakon input connectors are wired in parallel for easy chaining of multiple enclosures. Operating conditions are specified (15–35°C, max 75% relative humidity) and units are IP-20 rated — not suitable for exposure to rain. Warranty coverage is two years for manufacturing defects, with authorized-service restrictions.

Safety & Maintenance Notes

Follow the manual’s rigging and safety precautions: use rated hardware, respect angle-dependent working loads (eyebolts lose capacity at angles >45°), and implement periodic inspections of flying hardware. Do not open units — no user-serviceable parts inside — and avoid mounting near magnet-sensitive equipment. Dispose of units per WEEE regulations.

Notes:

  • Designed for professional audio applications: FOH, monitoring, installs, and touring.
  • Multiple models cover compact venues to high-power systems.
  • Rigging requires trained personnel and adherence to specified safety factors.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly