Manual.ly Logo

DAP Audio Splash 8A Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: OA-GPT-54-NAN
page

/ 20

Loading...
c5765891cd00de4a6df45ff98bdfa884ef20 page 3
2
Splash Series Active / Passive
Ordercode: D3588 – D3595
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device have to:
- be qualified
- follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty. This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT!
The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the system.
Always disconnect power from the mains, when system is not used. Only handle the power-cord by
the plug. Never pull out the plug by tugging the power-cord.
Always operate the unit with the AC ground wire connected to the electrical system ground.
Avoid flames and do not put close to flammable liquids or gases.
Avoid ground loops! Always be sure to connect the power amps and the mixing console to the
same electrical circuit to ensure the same phase!
Avoid installing your equipment very near radio or TV sets, mobile phones, etc., as these can cause
RF (radio frequency) interference.
Before changing your grounds around, always turn your amplifiers down.
Before connecting or disconnecting the power cord, make certain the ON / OFF switch is in the OFF
position.
Before switching on or off make certain the sound system’s amplifiers are off or turned down: this will
avoid signal peaks, which are annoying and sometimes dangerous (particularly for speaker
enclosures).
Do not connect (parallel or series) an amplifier output with any other amplifier output.
Do not connect this device to a dimmer pack.
Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output.
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!

Chat with your DAP Audio Splash 8A manual using AI

Get instant AI answers from your DAP Audio Splash 8A manual

Ask anything about the DAP Audio Splash 8A. Answers come from this manual, with the pages they are based on.

Splash 8A Maintenance Schedule

Periodically
Check cables

Periodically check your cables for faults to prevent problems like faulty contacts and ground hum.

Show in the manual (page 11)
Every few days
Check power cord

Check the device and power cord from time to time to ensure it is never crimped or damaged.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Splash 8A?

Yes No

Frequently Asked Questions

A

It works well for small gigs, rehearsal rooms, bars, portable DJ setups, and fixed installations. Its compact size and monitor-friendly shape also make it useful as a floor monitor.

Is this answer helpful?

A

Yes. The 8A model is an active 2-way bi-amp speaker with built-in amplification, so it is designed for simple setup and direct use with audio sources or mixers.

Is this answer helpful?

A

It offers clear highs, focused mids, and solid output for its size. The contour function helps shape the playback response for music or general sound reinforcement.

Is this answer helpful?

A

Yes. The trapezoidal cabinet and angled shape make it suitable for stage-monitor use, especially in compact performance spaces where flexible positioning matters.

Is this answer helpful?

A

The active version uses combo XLR connections and includes a link output, which makes it easy to connect and pass signal to another speaker in the system.

Is this answer helpful?

A

It is quite portable thanks to its lightweight ABS housing, integrated handles, and compact dimensions. It is designed for users who need frequent transport and quick setup.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Compact ABS cabinet and monitor shape make transport, setup, and stage use easier.
  • Active bi-amp design offers simple operation with built-in controls for volume, contour, and sensitivity.
  • Combo XLR inputs and link output support flexible connections in live or installed systems.
  • Good SPL and feedback resistance make it useful for DJs, small bands, bars, and rehearsal spaces.
VS

Disadvantages

  • 8-inch format limits deep low-end output compared with larger cabinets.
  • Sound and features are practical rather than premium, so it may not suit demanding touring rigs.
  • Active version needs mains power, which can reduce placement flexibility in some setups.
  • Proper setup and cable quality matter, so it is less forgiving of poor system integration.
M: OA-GPT-54-NAN

Product Specification

Principle

2-Way

Tweeter

1x 1"/1.00in

Woofer

1x 8"/8.00in

Amplification

active

Frequency Range

68Hz-20kHz

Power

130W RMS

SPL max.

113dB

Dimensions

10.63x16.54x9.45in (WxHxD)

Weight

12.19 lbs

M: OA-GPT-54-NAN

Product Description

DAP Audio Splash 8A Piece: Compact Sound with Big Reach

The DAP Audio Splash 8A piece Manual points to a speaker family built for dependable everyday performance without unnecessary complexity. The Splash 8A combines a compact footprint with a confident sound profile, making it a practical choice for portable rigs, small venues, rehearsal spaces, and fixed installations that need reliability and easy handling.

A speaker designed to travel well

One of the strongest qualities of the Splash 8A is its lightweight yet rugged ABS cabinet. The trapezoidal monitor-style shape helps it work both as a front-of-house speaker and as a floor monitor, while the pole-mount option adds flexibility for different room layouts. Integrated handles make moving and positioning the cabinet easier, which is especially helpful for musicians, DJs, and technicians who set up often.

Sound and control

As an active 2-way bi-amp speaker, the Splash 8A is built for straightforward operation. It combines an 8-inch woofer with a 1-inch neodymium driver, delivering clear mids, crisp highs, and solid output for its size. The contour switch allows quick tonal shaping for playback, while volume, sensitivity, and ground lift controls help adapt the speaker to different sources and environments.

Why it stands out

The Splash series is aimed at users who want a simple setup with professional-style features. With combo XLR connections, link output, and good resistance to feedback, the Splash 8A fits DJ sets, rehearsal rooms, bars, mobile events, and small installations. Its clean design and practical control set make it easy to integrate into a larger sound system.

Beyond the 8A, the Splash line includes multiple active and passive sizes, so the same family can scale from compact rooms to larger spaces. That consistency is useful when building a matching speaker setup across several areas or when you need a dependable monitor option on stage.

Notes

  • Best suited for small to medium performance spaces.
  • Use quality cables and proper power matching for stable results.
  • The active model adds convenience, while the passive versions offer more system-building flexibility.

In short, the DAP Audio Splash 8A piece Manual describes a speaker that balances portability, durability, and accessible performance. It is a sensible option for anyone who wants a dependable audio tool that can handle daily use without feeling oversized or complicated.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly