Manual.ly Logo

DAP Audio Pure-10 Manual

0.0 · 0 Ratings

PDF manual · 16 Pages

English

M: QW-35-FL
page

/ 16

Loading...
304c731ef33545bf34feeea37c62d38ae36b page b
10
Pure-10 Passive 10” Full Range
Order code: D3740
Connection Cables
Take care of your cables, always holding them by the connectors and avoiding knots and twists when
coiling them: This gives the advantage of increasing their life and reliability. Periodically check your
cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely
by using unsuitable or faulty cables.
Speakon
Input is a Speakon connector for connecting a speaker-level signal.
Output is a Speakon connector paralleled with the input connector, for daisy-chaining speakers.
Wiring:
Pin 1+ = Signal (+)
Pin 1- = Ground (-)
Maintenance
The Pure-10 requires almost no maintenance. However, you should keep the unit clean. Disconnect the
mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use
alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the connections with a damp cloth.
Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
No Sound
Always check if all the cables and cords are connected. Always turn off power to the area before
checking the wires, to prevent electric shock.
If everything works properly and there is still no sound, revisit the manufacturer’s instructions to make sure
they were followed during installation. If everything was installed correctly and there is still no sound, you
may want to consider bringing in a professional to take a look at your speaker.
If the speakers do not operate properly, refer servicing to a technician.
Suspect two potential problem areas as: the power supply and the speakers.
01) Power supply. Check if the unit is plugged into an appropriate power supply.
02) The speakers. Return the Pure-10 to your DAP Audio dealer.
03) If all appears to be O.K., plug the unit in again.
04) If you are unable to determine the cause of the problem, do not open the Pure-10, as this may
damage the unit and the warranty will become void.
05) Return the device to your DAP Audio dealer.
Sound Warping
If the sound coming out of your speaker is loud enough, but seems to be warped or distorted, your treble
or bass levels may need to be adjusted.
If there are not many pieces of furniture in the room and the floor has no carpet or rug, then you will most
likely have to set your treble to minus. With very little in the room to absorb the sound, too much treble
can make the sound bounce off of fixtures in the room, making it tinny sounding.
With the bass, if the speaker is too close to a wall and is not aimed properly, then you will need to set the
bass to minus, to stop the low tones from bouncing off of the walls or large pieces of furniture.

Chat with your DAP Audio Pure-10 manual using AI

Get instant AI answers from your DAP Audio Pure-10 manual

Ask anything about the DAP Audio Pure-10. Answers come from this manual, with the pages they are based on.

Pure-10 Maintenance Schedule

Periodically
Check cables for damage or faults

Periodically check your cables to prevent problems like faulty contacts or ground hum. Hold cables by connectors and avoid knots when coiling.

Show in the manual (page 11)
As needed
Clean the speaker cover

Disconnect mains power and wipe the cover with a damp cloth. Do not immerse in liquid or use alcohol/solvents.

Show in the manual (page 11)
As needed
Clean audio connections

Disconnect electric power and wipe connections with a damp cloth. Ensure they are thoroughly dry before reconnecting equipment.

Show in the manual (page 11)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Pure-10?

Yes No

Frequently Asked Questions

A

The maximum sound pressure level reaches 124 dB at one meter distance.

Is this answer helpful?

A

Use Speakon cables to connect the IN to the OUT of the next unit for chaining.

Is this answer helpful?

A

Yes, it supports a 35mm pole mount interface for flexible positioning on stages.

Is this answer helpful?

A

Do not use indoors only. Water contact or liquids can damage the unit.

Is this answer helpful?

A

The warranty lasts for one year from the date of purchase.

Is this answer helpful?

A

No, modifying the device voids the warranty and may cause safety risks.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Robust birch plywood cabinet with scratch-resistant finish ensures durability on tour.
  • High power handling at 250W RMS and 500W peak for loud output performance.
  • Speakon connectors simplify daisy-chaining multiple units securely without hassle.
  • Wide frequency response from 55 Hz to 19 kHz with good sensitivity levels.
VS

Disadvantages

  • Passive design requires an external amplifier to function properly in use.
  • No built-in DSP or equalizer on board for tone shaping adjustments.
  • Warranty is void if user attempts internal modifications or repairs without help.
M: QW-35-FL

Product Specification

Amplification

passive

Impedance

8 Ohms

M: QW-35-FL

Product Description

Discover the Power of the DAP Audio Pure-10 Passive

A Versatile Audio Solution for Modern Stages

When looking for high-quality audio equipment, the DAP Audio Pure-10 Passive stands out as a robust choice for various applications across the globe. Whether you are managing a mobile sound setup for events or installing a fixed system in a venue, this speaker delivers exceptional clarity and power. Users searching for the DAP Audio Pure-passive Manual often find that this specific model meets rigorous standards for performance and durability required by professionals. The cabinet is constructed from high-grade birch plywood, ensuring it withstands the rough demands of touring and rental industries without showing damage easily. A scratch-resistant finish keeps it looking professional during transport and setup sessions.

Performance and Technical Specifications

With a continuous power handling capacity of 250 watts RMS and a peak power rating of 500 watts, this unit is designed to move a significant amount of air without distortion. The 10-inch full-range driver paired with a tuned bass-reflex system produces deep lows and very crisp highs for vocal clarity. Frequency response extends from 55 Hz to 19 kHz at -3 dB, ensuring a rich listening experience across the audible spectrum. The maximum sound pressure level reaches 124 dB, making it highly suitable for demanding environments where volume and headroom are critical. Sound technicians appreciate the 90 x 45 degree dispersion horn, allowing for wide horizontal coverage without sacrificing vertical detail or causing unnecessary feedback issues nearby.

Installation and Connectivity Options

Connecting this equipment is straightforward thanks to the Neutrik Speakon NL4 inputs and outputs found on the rear panel. These professional connectors allow for secure daisy-chaining of multiple units, streamlining the setup process for larger speaker arrays or line arrays. Proper grounding is essential to prevent electrical hum and ensure operator safety during live performances. Always consult the specific wiring diagram for your region when connecting to the mains power supply to avoid damaging the internal components. For vertical positioning, a 35mm pole mount interface is included, offering flexible positioning options for stages or ceilings.

Maintenance and Important Safety Notes

To maintain peak performance over the years, keep the unit clean using a soft damp cloth for exterior surfaces. Avoid using solvents or alcohol which could potentially damage the scratch-resistant protective finish on the shell. Never immerse the device in water or operate it during thunderstorms to prevent electrical hazards. Regular checks of power cords and interconnect cable integrity are vital for long-term reliability and safety. If issues arise such as noise or distortion, do not attempt internal repairs yourself as this strictly voids the manufacturer warranty. Instead, contact a qualified technician or your authorized dealer for official service procedures and repairs.

M: QW-35-FL

© Copyright 2026 Manual.ly