Manual.ly Logo

DAP Audio EM-16 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-54-NAN
page

/ 12

Loading...
f128a4871c65c1364b45b777737ed2adc4fa page b
9
Maintenance
The DAP Audio EM-16 requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections
with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.
Troubleshooting
DAP Audio EM-16
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1. If the device does not operate properly, set the switch on the EM-16 in OFF position.
2. Check the batteries, etc.
3. If all of the above appears to be O.K., Set the switch in ON position.
4. If you are unable to determine the cause of the problem, do not open the EM-16, as this may
damage the unit and the warranty will become void.
5. Return the EM-16 to your DAP Audio dealer.
Product Specification
Type: Dynamic, moving coil.
Polar pattern: Cardioid
Frequency Response: 50-16.000 Hz
Max. SPL: 138 dB (1% THD)
Power supply: 2x Battery UM3, AA1.5V (not included)
Carrier Frequency Range: 790-846 MHz
RF Output: 10 mW
Stability: ±0.005%
Frequency Deviation: ±48 kHz
LCD Display: Frequency, battery fuel gauge
Controls: Power On/Off, mode setting, AF Level Control,
Frequency Up/Down, Lock-on mode
Spurious Rejection: <-60 dBC
Dimensions: mic: Ø 50 mm x L 260 mm
Net. Weight: 0,262 kg
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: service@highlite.nl

Chat with your DAP Audio EM-16 manual using AI

Get instant AI answers from your DAP Audio EM-16 manual

Ask anything about the DAP Audio EM-16. Answers come from this manual, with the pages they are based on.

EM-16 Maintenance Schedule

As needed
Wipe cover with damp cloth

Disconnect power and wipe the unit with a damp cloth. Do not immerse in liquid or use alcohol.

Show in the manual (page 11)
As needed
Clean connections

Disconnect power and wipe DMX and audio connections with a damp cloth. Ensure they are dry before reconnecting.

Show in the manual (page 11)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend EM-16?

Yes No

Frequently Asked Questions

A

Choose based on your country or region. The EM-16 is offered as D143179 (790-814 MHz) and D143182 (822-846 MHz). Always match the frequency to local regulations and the frequency you intend to use.

Is this answer helpful?

A

Install the batteries, switch the unit ON, then use the supplied screwdriver to rotate the channel switch on the back. Select the channel that corresponds to the desired frequency. After setting, place the color cap back and use lock-on mode if available.

Is this answer helpful?

A

The EM-16 uses 2x UM3 (AA) 1.5V batteries. Open the back, insert the batteries with correct polarity, and turn the unit on. If the LED turns red, replace the batteries.

Is this answer helpful?

A

The guidance specifies using a suitable (optional) DAP receiver, mentioned as the DAP ER-216 (with model codes D143079 or D143082). Use the receiver that matches your planned frequency range.

Is this answer helpful?

A

Keep the receiver antenna visible from the transmitter position, reduce the distance between them, and angle the antennas about 45 degrees away from vertical while pointing them away from each other. Avoid placing antennas near metal surfaces or obstructions.

Is this answer helpful?

A

If troubleshooting does not resolve the issue, the instructions advise not opening the EM-16, as it may damage the unit and can void the warranty. Instead, return it to your DAP Audio dealer for service.

Is this answer helpful?

A

No. The safety information explicitly cautions to keep the device away from rain and moisture and to use it indoors only. This helps prevent electrical hazards and equipment damage.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • PLL synthesized UHF handheld with 16 switchable frequencies for fast channel selection
  • Dynamic, moving-coil cardioid microphone with wide 50-16000 Hz frequency response
  • High max SPL (138 dB at 1% THD) for loud stage sources without easy overload
  • Low-maintenance: clean with a damp cloth and keep connections dry and free of dirt
VS

Disadvantages

  • Indoor use only: keep away from rain and moisture to avoid damage and unsafe operation
  • Modifications and unauthorized handling can void warranty; no user-serviceable parts
  • Needs correct frequency planning by country; discrepancies with approved frequencies are not the manufacturer responsibility
  • Operates on 2x AA (UM3) batteries and they are listed as not included
M: OA-GPT-54-NAN

Product Specification

Type

Handheld transmitter

Frequency band

UHF

Carrier frequency range

822-846MHz

True Diversity

yes

Audio transmission range

50Hz-16kHz

Consisting of

Handheld transmitter

M: GO-GEM-FL-25

Product Description

DAP Audio EM-16 Wireless Handheld Microphone (DAP Audio EM-16 Manual)

The DAP Audio EM-16 is a professional wireless handheld microphone designed to bring dependable, studio-style sound to live events, presentations, and entertainment venues. Built for the UHF spectrum, it offers stable performance with PLL synthesized frequency control, making it a practical choice when you need a clear signal and reliable channel selection.

What makes the EM-16 stand out is its flexibility in frequency planning. Two available frequency ranges cover common regional allocations, and the handheld includes 16 switchable frequencies per unit. That means you can quickly align the microphone to an appropriate channel and reduce setup time during busy show schedules.

Sound-wise, the EM-16 uses a dynamic, moving-coil design with a cardioid pickup pattern. With a wide frequency response (50-16000 Hz) and a maximum SPL rating up to 138 dB (1% THD), it is well suited for loud stage moments while maintaining control and intelligibility. The system also includes practical onboard features like power control, AF level control, frequency up/down, and a lock-on mode for secure operation.

Getting started is straightforward. The included approach aligns with the guidance you will find in the DAP Audio EM-16 Manual, including battery installation, confirming the LED status, and setting the correct frequency and channel. For maximum performance, the recommended placement tips focus on keeping the receiver antenna visible from the transmitter position, minimizing distance, and positioning antennas away from metal surfaces and obstructions.

The EM-16 is also designed to be low-maintenance. Regular cleaning with a damp cloth, keeping connections clean, and ensuring everything is thoroughly dry before powering up helps maintain stable operation. Safety and use requirements are emphasized throughout, including indoor-only operation, avoiding moisture, and not opening the unit or performing unauthorized modifications.

Key takeaways

  • UHF wireless handheld microphone with PLL synthesized control and 16 switchable frequencies
  • Dynamic cardioid capsule with 50-16000 Hz response and up to 138 dB SPL handling
  • Two regional frequency-range options to help match local allocations and reduce interference
  • Fast setup workflow: select the correct frequency, install batteries, and use the lock-on mode
  • Low-maintenance design focused on safe cleaning and keeping connections dry and clean

Notes

  • Choose the correct model for your region (frequency range matters).
  • Keep the receiver antennas separated and avoid metal obstacles for stronger reception.
  • Use original packaging for returns and follow RMA instructions when required.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly