DAP Audio CS-520 Manual
PDF manual · 8 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your DAP Audio CS-520 manual using AI
Get instant AI answers from your DAP Audio CS-520 manual
Ask anything about the DAP Audio CS-520. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend CS-520?
Yes NoFrequently Asked Questions
The CS-850S is an 8-inch ceiling-mounted subwoofer for adding low-frequency support in public, commercial, hospitality, and multi-room audio installations. It is intended for indoor installed sound systems.
Is this answer helpful?
It is specified for a frequency response of 28 to 200 Hz. Its passive crossover filters high frequencies so the unit can concentrate on bass and low-mid bass reproduction.
Is this answer helpful?
Yes. The subwoofer provides selectable transformer taps for 70 V and 100 V distributed audio systems. Select the correct tap wire and common wire according to the planned amplifier load and required output level.
Is this answer helpful?
Yes. The transformer can be separated through the connection terminals, allowing the subwoofer to be used as an 8-ohm load with a compatible low-impedance external amplifier.
Is this answer helpful?
Plan for a 230 mm mounting opening and 180 mm mounting depth. Check above the ceiling for ducts, pipes, electrical cables, and other obstructions before making the cutout.
Is this answer helpful?
Yes. Remove the grille before painting and use light spray coats. Remove the cloth from the grille interior first, avoid brushes or rollers, and clear blocked holes with compressed air if needed.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- 8-inch ceiling subwoofer delivers low-frequency coverage from 28 to 200 Hz for discreet installed audio systems.
- Selectable 70 V and 100 V power taps support distributed speaker installations with different coverage requirements.
- Transformer can be disconnected for 8-ohm low-impedance amplifier connections.
- Paintable grille and frame help the white ABS design match the surrounding ceiling.
- Quick-turn mounting clamps and a supplied cutting template support efficient ceiling installation.
Disadvantages
- IP20 protection means the CS-850S is intended for dry indoor locations only.
- Installation needs a 230 mm cutout, 180 mm depth, safe ceiling clearance, and adequate structural support.
- Its open infinite-baffle arrangement means ceiling conditions and insulation can affect bass consistency.
- Electrical connections and servicing require qualified personnel.
- Improper polarity, excessive EQ, feedback, or damaged cables can reduce sound quality or harm equipment.
Product Specification
Shape
round
Principle
1-way
Color
white
Product Description
DAP Audio CS Manual: CS-850S Ceiling Subwoofer
The DAP Audio CS-850S is an 8-inch ceiling-installation subwoofer designed to bring controlled low-frequency reinforcement to public spaces, commercial interiors, hospitality venues, and multi-room audio systems. This DAP Audio CS Manual overview highlights a practical passive subwoofer that combines discreet installation with flexible system integration.
Built for frequencies from 28 to 200 Hz, the CS-850S supports fuller bass reproduction without taking up floor space. Its passive crossover filters higher frequencies to help keep bass output focused and reduce unwanted distortion. This makes it a useful companion for ceiling speaker installations where clearer low-end presence is needed for music, announcements, or ambient audio.
Flexible Audio System Connection
The CS-850S can be used in 70 V and 100 V distributed audio systems through selectable power taps. Installers can choose the appropriate output level for the coverage area and amplifier design. The unit also offers 8-ohm operation when the transformer is disconnected, allowing connection to a compatible low-impedance external amplifier.
With a 90 dB sensitivity rating and a 50 W maximum tap option, this ceiling subwoofer is suited to installations that need bass support while maintaining a clean visual appearance. Correct polarity and suitable speaker cable are important for consistent bass performance across a multi-speaker system.
Designed for Clean Ceiling Installation
The white ABS construction, removable grille, and paintable frame help the CS-850S blend into a broad range of interiors. Its 230 mm mounting opening and 180 mm mounting depth should be considered during planning. Three quick-turn mounting clamps secure the speaker against the ceiling, simplifying installation once the cutout and wiring are prepared.
Before fitting the unit, the installation area should be checked for pipes, electrical wiring, air-conditioning ducts, and other obstructions. The ceiling must also support the 3 kg speaker weight. Keeping the subwoofer away from nearby ceiling lights can help minimize vibration effects.
Sound and Placement Considerations
The CS-850S uses an infinite-baffle ceiling arrangement rather than a dedicated enclosure. Installation conditions can therefore influence bass response. Suitable, evenly applied insulation around ceiling speakers may reduce sound transfer into the ceiling void, limit vibration, and improve consistency between installed units.
For best results, use quality CL2 or CL3 speaker cable and maintain the same polarity throughout the system. Longer cable runs over 20 m benefit from 14-gauge cable, while shorter runs can use 16- or 18-gauge cable where permitted by local regulations.
Notes
- Intended for indoor use only with an IP20 rating.
- Installation, electrical connections, and service should be completed by qualified personnel.
- Paint the frame before installation, and use light spray coats on the removed grille to avoid blocked perforations.
- Avoid excessive input levels, microphone feedback, and extreme equalization that may cause distortion or speaker damage.
Search for 67,706 Manuals online
Type-in Brand or Model