Cornered Audio LS1 Manual
PDF manual · 11 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Cornered Audio LS1 manual using AI
Get instant AI answers from your Cornered Audio LS1 manual
Ask anything about the Cornered Audio LS1. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend LS1?
Yes NoFrequently Asked Questions
The Cornered Audio LS1 handles 250 watts IEC standard power. It can handle peak power of up to one thousand watts for short durations.
Is this answer helpful?
Yes, they can be mounted vertically on a wall or horizontally below the TV. You must use the mounting holes and screws provided in the instructions.
Is this answer helpful?
We recommend an amplifier between 250 to 500 watts. Avoid small amplifiers as they might clip and damage the tweeter under stress.
Is this answer helpful?
Do not wet the dome tweeter. Use a soft dry cloth. Wiping it carefully with a well-wrung lint-free cloth is okay but avoid changing geometry.
Is this answer helpful?
Yes, you can couple cabinets together. They can be mounted back to back for 180 degrees or four units for 360 degree dispersion.
Is this answer helpful?
The nominal impedance is 8 ohm. This makes them an easy load for most quality amplifiers in both professional and home environments.
Is this answer helpful?
Do not mix with household waste. Use separate collection systems for electronic products as required by regional legislation for recycling.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Unique triangular design fits corners and walls
- High power handling up to one thousand watt peaks
- Natural three-dimensional soundstage reproduction
- Easy installation with accessible cable terminals
- Aluminum cabinet reduces weight and power compression
Disadvantages
- Requires specific amplifier size to avoid distortion
- Corner fit may need adjustment if walls not 90 degrees
- Limited color options of black, white, or aluminum
- Requires drilling into wall structure for mounting
- Tweeter dome requires careful cleaning only
Product Specification
System Type
2-way
Tweeter
2x 1" (25.4mm)
Woofer
1x 6.5" (165.1mm)
Amplification
Passive
Frequency Range
70Hz-20kHz
Power Handling
250W RMS, 1000W Peak
Impedance
8 Ohm
Sensitivity
92dB
Max SPL
122dB
Dispersion Angle
90x60 deg
Dimensions
19.76 x 9.13 x 6.57" (W x H x D)
Weight
14.11 lbs
Product Description
Experience Cornered Audio LS1 Excellence
Transform your living space with the unique design of the Cornered Audio LS1. This speaker system offers a one-of-a-kind ninety-degree triangular shape that fits discreetly into corners, on walls, or ceilings. It is not just about looks. The engineering delivers excellent sound quality that reproduces a natural three-dimensional soundstage. Listening to music becomes a favorite activity with this setup. The design integrates well with any interior decor style while maintaining high performance standards.
Installation is straightforward if you follow guidelines carefully. Connect cables before mounting the unit to access terminals easily. The discreet cable terminals are located on the front baffle behind the front cover. You must remove the cover to access them. Ensure the amplifier is off. Run the cable through the rear tube. Connect positive to positive terminals. Connect negative to negative for proper phase alignment. The Cornered Audio LS1 Manual provides detailed steps for this process to ensure safety and longevity.
Finding the perfect spot is crucial for a wide frequency response. Place speakers minimum two meters and maximum five meters apart. Avoid obstacles between the speakers and listening position for optimal tonal balance. This setup creates a clear picture of each musician. The LS1 supports high frequency dispersion at ninety-by-ninety degrees. Aluminum cabinets are light yet durable and work as a large cooling surface for power compression management.
Choose a suitable amplifier to power the handling capabilities effectively. A powerful experience awaits with high SPL ratings up to one hundred eighteen decibels. Avoid small amplifiers that might clip and distort significantly. Keep tone controls near neutral position. Clean the cabinet with a dry microfiber cloth. Do not wet the dome tweeter as it can change geometry. Dispose of electronics properly according to local rules for environmental safety.
This unit features high power handling for professional applications consistently. The dispersion is wide ensuring uniform response across the room. Coupling cabinets increases coverage significantly up to three hundred sixty degrees if needed. You can achieve 360 degree dispersion with multiple units hung from the ceiling. Color options include black, white, or aluminum finish to match your decor. Enjoy the great looking experience provided by Cornered Audio designs for your home theater. The LS1 model specifically handles peak power at one thousand watts. It supports eight ohm nominal impedance which is an easy load for amplifiers. The sensitivity is ninety-two decibels at two point eight three volts per meter. This ensures efficient performance without needing excessive gain. Professional installers appreciate the aluminum construction reducing weight compared to wood. It works as a cooling surface reducing power compression. You can couple units together for surround setups or single front channels. The manual emphasizes checking wall structures for solid support before drilling holes. Warranty information is available through local distributors for service requests. Proper disposal prevents environmental harm.
Search for 67,706 Manuals online
Type-in Brand or Model