Manual.ly Logo

Cornered Audio C3 Manual

0.0 · 0 Ratings

PDF manual · 8 Pages

English

M: OA-GPT-5-NAN
page

/ 8

Loading...
36b884d4d11ba02ccb5930424b0bbf9a6a64 page 1
Lorem ipsum 01
02 Lorem ipsum
HOW TO
CORNER
YOURSELF
WITH GREAT
SOUND
Contents of the manual are subject to change without notice. CORNERED Audio does not accept any
liability for loss or damage caused or alleged to be caused directly or indirectly by these instructions.
CORNERED Audio makes no guarantee of any kind with regard to these instructions.
Copyright 2010 CORNERED Audio ApS, Denmark.
Introduction to Cornered C3

Chat with your Cornered Audio C3 manual using AI

Get instant AI answers from your Cornered Audio C3 manual

Ask anything about the Cornered Audio C3. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend C3?

Yes No

Frequently Asked Questions

A

The C3 is recommended with amplifiers in the 40–100 watt range into 8 ohms. Larger, well-controlled amplifiers are preferable to small ones, as underpowered amps driven into clipping can damage the tweeter. Maintain clean, undistorted signal for best results.

Is this answer helpful?

A

Yes. For corners under 90°, place the cabinet as deep into the corner as possible. For angles over 90°, mount on the side wall and leave a small air gap behind the cabinet; visually the finish remains acceptable and acoustic performance remains good.

Is this answer helpful?

A

Use at least 1.5 mm² for short runs; 2 mm² (14 AWG) is suitable up to 20 meters, 4 mm² (11 AWG) for runs beyond 20 meters. Avoid thin, high-capacitance cables. The rear cable tube accepts up to 10 mm outer diameter—strip outer jacket if using thick multi-core pro cable.

Is this answer helpful?

A

Remove the front cover to access the cable tube and screw terminals, run speaker cable through the rear tube, connect red (+) to red and black (-) to black, then mark and drill through the two mounting holes, use 4 mm rawl plugs and 3 mm screws, mount the speaker and replace the cover.

Is this answer helpful?

A

The C3’s low-frequency response begins around 70 Hz. For deep bass or home theater LFE content, adding a subwoofer is recommended. If using a sub, apply a 24 dB Linkwitz-Riley high-pass filter at 80–100 Hz to protect the speakers and achieve smooth integration.

Is this answer helpful?

A

Clean the cabinet with a soft, dry microfiber cloth. Vacuum the front grille or wipe gently with a well-wrung lint-free cloth and mild cleaner. Do not press or alter the tweeter dome when cleaning behind the grille, as this can affect sound quality.

Is this answer helpful?

A

Yes. Two cabinets back-to-back yield about 180° coverage; three around a corner provide 270°; four can be hung for 360° dispersion. This modular capability makes the C3 suitable for professional installations requiring broad, uniform coverage.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Versatile 90-degree triangular cabinet fits corners, walls, shelves, and center/rear channel use
  • Wide dispersion (approx. 120x120°) creates a natural 3D soundstage and consistent coverage
  • Lightweight aluminum cabinet reduces power compression and allows one-person installation
  • Compatible with common amplifiers (8 Ω nominal, 40–100 W recommended) and easy to drive
  • Modular mounting enables coupling multiple cabinets for 180°, 270°, or 360° coverage
VS

Disadvantages

  • Frequency response starts at 70 Hz — may require a subwoofer for deep bass-heavy systems
  • Cable tube limits outer diameter to 10 mm; very thick pro cables need preparation
  • Front cover must be removed to access terminals — not ideal after final mounting without planning
  • Sensitivity ~86 dB — may need more amplifier power for extremely large rooms
  • Screw-mount installation requires wall integrity and accurate drilling for secure mounting
M: OA-GPT-5-NAN

Product Specification

Design

2-way

Tweeter

2x 1 in

Woofer

1x 6.50 in

Amplification

passive

Frequency Range

70Hz-25kHz

Power Handling

80W RMS, 320W Peak

Impedance

8Ω

Sensitivity

86dB

Max. SPL

111dB

Dispersion Angle

120°x120°

Dimensions

19.76x9.13x6.57in (WxHxD)

Weight

5.96 lb

M: OA-GPT-54-NAN

Product Description

Cornered Audio C3 — Compact Corner Speaker with Big Performance

The Cornered Audio C3 is a compact, triangular 90-degree speaker engineered to sit discreetly in corners, on walls, shelves, or as center/rear channels in a surround setup. Its unique wedge-shaped cabinet blends minimalist design with wide sound dispersion to create a natural three-dimensional soundstage that fills the room while staying visually unobtrusive. Ideal for living rooms, media centers, and multi-speaker installations, the C3 pairs approachable aesthetics with reference-minded engineering.

Inside its slim aluminum cabinet the C3 houses a 4" woofer and a 1" dome tweeter, tuned for an extended frequency response (70 Hz–25 kHz) and a sensitivity around 86 dB. With an 8 ohm nominal impedance and a recommended amplifier range of 40–100 W, the speaker is easy to drive and matches most quality amplifiers. The cabinet’s construction also helps dissipate heat and reduce power compression, enabling reliable performance at elevated levels.

Installation is straightforward: run speaker cable through the discrete rear cable tube, connect screw-type terminals behind the removable front grille, and mount using the two pre-aligned screw holes. The C3 accepts up to 10 mm cable diameter in the tube and works in corners even if the angle is not exactly 90 degrees—mount deeper in tight corners or offset on side walls for >90° corners. Cabinets can be combined: two back-to-back for 180° coverage, three around a corner for 270°, or four suspended for full 360° dispersion.

For best results, place left and right speakers about 2–5 meters apart and avoid obstructions between speakers and listening position to preserve imaging and tonal balance. Use speaker cable of at least 1.5 mm2 (2 mm2 recommended for longer runs) and ensure amplifier channels remain clean—larger, well-controlled amplifiers are preferred over small ones to avoid clipping. Routine care is simple: wipe cabinets with a soft dry microfiber cloth and gently vacuum or lightly wipe the grille. Follow local regulations for recycling when disposing of the product.

Notes:

  • Cable tube limits outer diameter to 10 mm; remove outer insulation for very thick pro cables and feed individual conductors to terminals.
  • Avoid phase reversal: ensure red (+) amplifier output connects to red (+) terminal to preserve bass and imaging.
  • If used with subwoofer, apply a 24 dB Linkwitz-Riley high-pass filter at 80–100 Hz for optimal crossover behavior.

Overall the Cornered Audio C3 delivers an elegant, space-saving solution for homeowners and professionals looking to blend wide dispersion and reliable performance in compact packages.

M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly