Manual.ly Logo

Clage DSX Touch Manual

0.0 · 0 Ratings

PDF manual · 358 Pages

English

M: gpt-5.6-terra
page

/ 358

Loading...
06565f21f6f479e973fb53d9200326f34049 page 28
40
EN
DSX Touch
• Plastic surfaces and fittings should only be wiped with a damp cloth. Do not use
abrasive or chlorine-based cleaning agents or solvents.
• For a good water supply, the outlet fittings (e.g. jet regulators and shower heads)
should be unscrewed and cleaned at regular intervals. Every three years, the electri-
cal and plumbing components should be inspected by an authorised professional in
order to ensure proper functioning and operational safety at all times.
Cleaning and maintenance
2. How to use
This instantaneous water heater features an automatic air bubble protection to prevent
it from inadvertently running dry. Nevertheless, the appliance must be vented before
using it for the first time. Each time the appliance is emptied (e.g. after work on the
plumbing system, if there is a risk of frost or following repair work), the appliance must
be re-vented before it is used again.
1. Disconnect the instantaneous water heater from the mains (e.g. via deactivating the
fuses).
2. Unscrew the jet regulator on the outlet fitting and open the cold water tap valve to
rinse out the water pipe and avoid contaminating the appliance or the jet regulator.
3. Open and close the hot water tap until no more air emerges from the pipe and all
air has been eliminated from the water heater.
4. Only then should you re-connect the power supply again (e.g. via activating the
fuses) to the instantaneous water heater and screw the jet regulator back in.
5. The appliance activates the heater after approx. 10seconds of continuous water
flow.
Venting after maintenance work

Chat with your Clage DSX Touch manual using AI

Get instant AI answers from your Clage DSX Touch manual

Ask anything about the Clage DSX Touch. Answers come from this manual, with the pages they are based on.

DSX Touch Maintenance Schedule

Remind me when maintenance is due
Every three years
Inspect electrical and plumbing components

Have an authorised professional inspect electrical and plumbing components to ensure proper function and operational safety.

Show in the manual (page 40)
At regular intervals
Clean outlet fittings

Unscrew and clean outlet fittings such as jet regulators and shower heads regularly to maintain good water flow.

Show in the manual (page 40)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: gpt-5.6-terra

Ask a Question

0/1000

Do you recommend DSX Touch?

Yes No

Frequently Asked Questions

A

The heater allows outlet temperatures from 20 C to 60 C. In the comfort range from 35 C to 43 C, adjustments can be made in 0.5 C steps for finer control. For shower installations, the maximum temperature should be limited to 55 C.

Is this answer helpful?

A

Yes. The DSX Touch supports up to eight user profiles. Each profile can store individual preferred temperatures for applications such as handwashing, showering, bathing, and hot water.

Is this answer helpful?

A

It can be controlled from the integrated touch display, the included Bluetooth remote control, or the CLAGE Smart Control app on a compatible smartphone or tablet. App connectivity can use Bluetooth or Wi-Fi.

Is this answer helpful?

A

Yes. Eco mode limits preset temperatures to efficient values and limits water flow to 8 l/min. The unit also records water consumption, electricity consumption, and estimated costs to help users review usage patterns.

Is this answer helpful?

A

Yes. The DSX Touch accepts inlet temperatures up to 70 C and can be used for top-up heating in systems with preheated water, including solar applications. If inlet water is already warmer than the selected setting, the heater does not add energy.

Is this answer helpful?

A

The appliance can be configured during commissioning for 18 kW, 21 kW, 24 kW, or 27 kW operation. The correct setting depends on the available electrical installation, cable sizing, and circuit protection.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Degree-accurate electronic temperature control from 20 C to 60 C helps maintain stable outlet temperatures.
  • Touch display, Bluetooth remote control, and Smart Control app provide several convenient control methods.
  • Up to eight user profiles can save personal temperatures and application preferences.
  • Eco mode, adjustable flow limits, and consumption statistics support more conscious water and energy use.
  • Selectable 18, 21, 24, or 27 kW output and inlet temperatures up to 70 C provide installation flexibility.
VS

Disadvantages

  • Requires professional electrical and plumbing installation with suitable three-phase power supply.
  • Wi-Fi features and remote app access depend on compatible devices, network setup, and secure credentials.
  • Consumption statistics are informative only and are not suitable for billing purposes.
  • The fill-up automatic function requires supervision and confirmation before water flow resumes.
  • The supplied remote control uses AAA alkaline batteries and must be protected from moisture.
M: gpt-5.6-terra

Product Specification

Energy efficiency class

A (A+ to F)

Energy consumption

484 kWh/year

Rated power

18-27 kW (400 V)

Rated current

26-39 A

Temperature control

68-140°F

Inlet temperature

max. 158°F

Capacity

13.53 fl oz

Design

closed (pressure-resistant)

Installation type

under- or over-sink installation

Connection

1/2 in

Display

touchscreen

Special features

electronic control, bare-wire heating system, air detection system, remote control, suitable for solar thermal systems, dynamic flow rate control (Servotronic), app control (Wi-Fi, Bluetooth), voice control (Amazon Alexa)

Protection rating

IP25

Noise level

15 dB(A)

Dimensions

9.41 x 18.43 x 3.78 in (W x H x D)

Weight

9.92 lb (filled with water)

M: gpt-5.6-terra

Product Description

Clage DSX Touch Electric Instantaneous Water Heater

The Clage DSX Touch Electric Instantaneous Water Heater delivers precisely controlled hot water on demand for homes that value comfort, efficiency, and connected control. With the keyword Clage DSX Touch Electric Instantaneous Water Heater - Read, Download & Print Free, this overview highlights the practical features that make this advanced unit suitable for one or multiple outlets.

Precise temperature control at your fingertips

A responsive touch display gives the DSX Touch a modern, intuitive interface. Users can set an outlet temperature from 20 C to 60 C, with fine 0.5 C adjustments in the common comfort range of 35 C to 43 C. Its electronic control continuously balances inlet temperature, water flow, and power demand to help maintain the selected temperature even when water pressure changes.

The colored display ring makes settings easy to understand at a glance, shifting from cool blue at lower temperatures to red at higher ones. Preset applications for handwashing, showering, bathing, and hot water simplify everyday use, while saved settings can be adjusted to suit personal routines.

Personal profiles and smart connectivity

Up to eight user profiles can be created, allowing different household members to save preferred temperatures for common activities. This helps reduce repeated adjustments and supports a more tailored hot-water experience.

The unit can be operated directly through its display, with the supplied Bluetooth remote control, or through the CLAGE Smart Control app on a compatible smartphone or tablet. Bluetooth and Wi-Fi connectivity add convenient access to settings, consumption information, and device functions. Wi-Fi operation can also support software updates and connected-home options when integrated with a protected internet-enabled network.

Efficiency-focused water heating

As an instantaneous water heater, the DSX Touch heats water only while it is being drawn. The Eco mode limits application temperatures to practical values and caps flow at 8 l/min to encourage efficient use. Consumption statistics display water use, electricity use, and estimated costs across multiple periods, helping households better understand their habits.

An automatic function can work by duration or selected fill quantity. The fill function can be useful for repeatable tasks such as filling a bath, although it should always be supervised. A motor valve can limit flow to support the selected temperature when demand exceeds available heating capacity.

Flexible performance for demanding installations

The DSX Touch uses an electronically controlled bare-wire heating system and can be configured for 18, 21, 24, or 27 kW, depending on the electrical installation. It supports inlet temperatures up to 70 C, making it suitable for top-up heating with preheated water, such as water supplied by a solar system.

Note: Installation, electrical configuration, maintenance, and safety checks should be completed by qualified professionals. For shower use, the outlet temperature should be limited to 55 C.

The Clage DSX Touch combines high-output water heating with detailed control, user personalization, and smart operating options for a refined daily hot-water solution.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly