Manual.ly Logo

Clage DEX Next S Manual

0.0 · 0 Ratings

PDF manual · 302 Pages

English

M: QW-35-FL
page

/ 302

Loading...
22ef14fa876a1e71cb4b516560854aa9725d page 9
CLAGE
9
DE
Stellen Sie die gewünschte Temperatur am Gerät ein und öffnen Sie nur das
Warmwasser zapfventil. Wenn Ihnen die Wasser temperatur zu hoch ist, mischen Sie
kein kaltes Wasser zu, sondern geben Sie am Gerät eine niedrigere Temperatur ein.
Wenn Sie kaltes Wasser zumischen, wird das bereits erwärmte Wasser wieder abgekühlt
und es geht wertvolle Energie verloren. Außerdem entzieht sich das in der Armatur
zuge mischte Kalt wasser dem Regelungs bereich der Elek tronik, so dass die Temperatur-
konstanz nicht mehr gewähr leistet ist.
Energiespartipp
2. Gebrauch
Dieser Durchlauferhitzer ist mit einer auto matischen Luftblasenerkennung ausgestat-
tet, die ein versehentliches Trocken laufen verhindert. Trotzdem muss das Gerät vor der
erst en Inbetriebnahme entlüftet werden. Nach jeder Entleerung (z.B. nach Arbeiten in
der Wasser installation, wegen Frostgefahr oder nach Reparaturen am Gerät) muss das
Gerät vor der Wiederinbetriebnahme erneut entlüftet werden.
1.
Trennen Sie den Durchlauferhitzer vom Netz, indem Sie die Sicherungen aus-
schalten.
2. Schrauben Sie den Strahlregler an der Entnahmearmatur ab und öffnen Sie
zunächst das Kaltwasserzapfventil, um die Wasserleitung sauber zu spülen und eine
Verschmutzung des Gerätes oder des Strahlreglers zu vermeiden.
3. Öffnen und schließen Sie danach mehrfach das zugehörige Warm wasser zapfventil,
bis keine Luft mehr aus der Leitung austritt und der Durchlauferhitzer luftfrei ist.
4. Erst dann dürfen Sie die Stromzufuhr zum Durchlauferhitzer wieder einschalten und
den Strahlregler wieder einschrauben.
5. Nach ca. zehnSekunden kontinuierlichem Wasserfluss aktiviert das Gerät die
Heizung.
Entlüften nach Wartungs arbeiten
• Kunststoffoberflächen und Sanitär armaturen nur mit einem feuchten Tuch abwi-
schen. Keine scheuernden, lösungsmittel- oder chlorhaltigen Reinigungsmittel
verwenden.
• Für eine gute Wasserdarbietung soll ten Sie die Entnahme armaturen (z.B. Strahl-
regler und Duschköpfe) regel mäßig ab schrauben und reinigen. Lassen Sie alle
drei Jahre die elektro- und wasser seitigen Bauteile durch einen an er kann ten
Fachhandwerks betrieb über prüfen, um die einwand freie Funktion und Betriebs-
sicherheit jederzeit zu gewähr leisten.
Reinigung und Pflege

Chat with your Clage DEX Next S manual using AI

Get instant AI answers from your Clage DEX Next S manual

Ask anything about the Clage DEX Next S. Answers come from this manual, with the pages they are based on.

DEX Next S Maintenance Schedule

Remind me when maintenance is due
Every 3 years
Inspect electrical and plumbing components

Have an authorized professional inspect the electrical and water-side components to ensure proper function and operational safety.

As needed
Clean or replace filter strainer

Remove and clean the inlet filter strainer if warm water output is reduced due to dirt or limescale buildup.

Show in the manual (page 26)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend DEX Next S?

Yes No

Frequently Asked Questions

A

You can adjust the temperature using the sensor keys on the main unit or via the wireless remote control. The range is between 20 C and 60 C. Tapping once changes the setting by 1 C, or 0.5 C in the comfort zone.

Is this answer helpful?

A

Yes, the DEX Next S connects to smartphones and tablets via the CLAGE Smart Control app using Bluetooth. You can control temperature, view statistics, and manage settings remotely after pairing the device.

Is this answer helpful?

A

Absolutely. The unit can operate with preheated water from solar systems as long as the inlet temperature does not exceed 70 C. It is designed to integrate well with renewable energy setups.

Is this answer helpful?

A

First, check if the batteries need replacing. If they are fresh, ensure the remote is within 10 meters and not blocked by metal. You can also reset the connection by holding all four buttons for five seconds.

Is this answer helpful?

A

It is recommended to inspect and clean the inlet filter every three years or whenever you notice a reduction in water flow. This prevents limescale buildup and maintains heating efficiency.

Is this answer helpful?

A

Yes, the unit features an operation lock that can be secured with a four-digit PIN. This prevents unauthorized changes to settings and ensures safe operation in households with children.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Fully electronic control ensures precise temperature stability within 1 degree.
  • Supports up to four individual user profiles for different household needs.
  • Integrates with CLAGE Smart Control app for remote Bluetooth management.
  • High energy efficiency with Class A rating and eco-friendly operating modes.
  • Compatible with preheated water sources like solar thermal systems.
VS

Disadvantages

  • Requires professional installation due to complex 3-phase electrical connections.
  • Maximum temperature may be limited to 55 C when configured for shower use.
  • Remote control range is limited to 10 meters and can be affected by metal surfaces.
  • Initial setup requires entering PIN codes for remote pairing and security.
  • Filter maintenance must be performed regularly to maintain optimal flow rates.
M: QW-35-FL

Product Specification

Energy efficiency class

A (A+ to F)

Energy consumption

530 kWh/year

Rated power

18-27 kW (400 V)

Rated current

26-39 A

Temperature control

68-140°F, stepless

Inlet temperature

max. 158°F

Flow rate

max. 0.4 gal/min

Design

closed (pressure-resistant)

Mounting type

under-counter, over-counter

Connection

1/2"

Display

yes

Features

electronic control, bare-wire heating system, flow detection system, suitable for solar thermal, dynamic flow control (Servotronic)

Protection class

IP25

Noise level

15 dB(A)

Dimensions

9.4x18.4x3.8 in (WxHxD)

Weight

9.92 lbs (with water fill)

M: QW-35-FL

Product Description

Experience Ultimate Comfort with the Clage DEX Next S Electric Instant Water Heater

The Clage DEX Next S Electric Instant Water Heater represents a significant leap forward in home water heating technology. Designed for modern households, this fully electronic unit offers precise temperature control and exceptional energy efficiency. Whether you are filling a bathtub or taking a quick shower, the device ensures that your water is heated instantly to your exact preference without the waste associated with traditional storage tanks.

At the heart of the DEX Next S is its advanced graphics-enabled E-Paper display. This intuitive interface allows users to monitor settings at a glance while providing easy access to various functions through simple sensor keys. The system automatically adjusts power consumption based on inlet water temperature, desired outlet temperature, and flow rate. This intelligent regulation guarantees a constant temperature even during pressure fluctuations, eliminating the dreaded cold shock moments.

One of the standout features is the flexibility in user management. You can create up to four distinct user profiles, allowing each family member to save their preferred temperatures for specific applications like hand washing, showering, or bathing. The appliance also integrates seamlessly with smart home ecosystems via the CLAGE Smart Control app. Using Bluetooth connectivity, you can control the heater remotely from your smartphone or tablet, adjusting settings and monitoring usage statistics from anywhere in the house.

For those concerned about energy costs, the DEX Next S includes robust savings modes. Users can set flow limits or activate an eco-mode that restricts output to maximize efficiency. Additionally, the unit supports operation with preheated water from solar systems, making it an ideal component for sustainable home setups. Safety is paramount, with built-in protections against dry running, overheating, and electrical faults.

Installation is straightforward for professionals, with options for both concealed and surface mounting. The unit comes equipped with a wireless remote control, offering further convenience by allowing adjustments from across the room. With its sleek design, high energy efficiency class A rating, and comprehensive smart features, the Clage DEX Next S is the perfect choice for anyone seeking reliable, efficient, and comfortable hot water.

Key Notes

  • Supports up to 4 custom user profiles for personalized comfort.
  • Compatible with external load shedding relays for multi-appliance homes.
  • Features automatic air bubble detection to prevent dry running damage.
M: QW-35-FL

© Copyright 2026 Manual.ly