Manual.ly Logo

Cisco SF500 Manual

0.0 · 0 Ratings

PDF manual · 24 Pages

English

M: QW-35-FL
page

/ 24

Loading...
a88397cd69a27932f325d2c698669ff2a328 page 1
Quick Start Guide
Cisco 500 Series Stackable Managed Switches

Chat with your Cisco SF500 manual using AI

Get instant AI answers from your Cisco SF500 manual

Ask anything about the Cisco SF500. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend SF500?

Yes No

Frequently Asked Questions

A

Open a web browser and enter the default IP address 192.168.1.254. Use the default username cisco and password cisco. You will be prompted to change the password immediately upon first login.

Is this answer helpful?

A

Yes, you can stack compatible models within the SF500 series. However, all units must have identical firmware images to function correctly in a stack environment.

Is this answer helpful?

A

The device stores two firmware images. If the new active image fails to boot, the system can revert to the previous inactive image upon restart, ensuring network continuity.

Is this answer helpful?

A

Yes, specific models in the SF500 series support Power over Ethernet (PoE). You can configure power budgets and priorities directly through the web interface to manage connected devices like phones and cameras.

Is this answer helpful?

A

Navigate to the Administration section and select File Management. Choose the Backup option and specify the destination server via TFTP, HTTP, or SCP to save your current configuration.

Is this answer helpful?

A

No, IPv4 routing is standard, but IPv4 and IPv6 routing features depend on the specific model. Higher-end models like SG500X support full Layer 3 routing capabilities.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Supports stacking for simplified management and expanded port density
  • Comprehensive web-based GUI for easy configuration and monitoring
  • Advanced security features including 802.1X and SSH encryption
  • Real-time RMON and Etherlike statistics for proactive troubleshooting
  • Green Ethernet technology reduces power consumption efficiently
VS

Disadvantages

  • Stacking requires all units to run identical firmware versions
  • Limited TCAM resources may restrict complex ACL or QoS rules
  • No dedicated console port on some specific sub-models in the series
  • IPv6 routing features vary depending on the specific hardware model
  • Initial setup requires careful planning for IP addressing schemes
M: QW-35-FL

Product Specification

Function

Switch

Type

Standalone, Rackmount (via mounting bracket)

Network Connections

24x RJ-45, 2x RJ-45/SFP

Speeds

24x RJ-45 (10/100Base-T), 2x RJ-45 (10/100/1000Base-T), 2x SFP (100M/1Gb/s)

PoE

N/A

Backplane

28.8Gb/s, 9.52Mp/s, 9KB Jumboframes, 1MB Packet Buffer, 16K MAC Addresses, 2x Stacking (SFP, 1G/5Gb/s, dedicated)

Officially Supported Standards

802.1AX, 802.1D, 802.1Q, 802.1X, 802.1AB, 802.1p, 802.1s, 802.1w, 802.1X, 802.3, 802.3ab, 802.3az, 802.3u, 802.3x, 802.3z, IGMPv3, MLDv2

Configuration

Web Interface, Console, Serial (DB9), via Cloud, via Control Unit

Cooling

Passive

Dimensions (WxDxH)

17.32x1.77x10.12 inches, 1U

Weight

6.81 lbs

Color

Black

Features

Metal enclosure, removable mounting brackets, firmware updates possible

Manufacturer Warranty

Lifetime (10 years in AT/DE)

Note

For this device, link aggregation was officially specified with the obsolete standard IEEE802.3ad. The function has not been managed by the IEEE Working Group 3 (IEEE 802.3, CSMA/CD - Ethernet) since 2008, but by Working Group 1 (IEEE 802.1, High Level Interface - Internetworking) and is technically unchanged defined via IEEE 802.1AX.

M: QW-35-FL

Product Description

Cisco SF500 Rackmount Managed Stack Switch Overview

The Cisco SF500 Rackmount Managed Stack Switch, featuring 24x RJ-45 ports and 2x RJ-45/SFP uplinks, represents a robust solution for small to medium-sized business networks requiring advanced management capabilities. This device is designed to simplify network administration while delivering high performance and reliability. The switch supports stacking technology, allowing multiple units to be combined into a single logical entity for easier management and increased port density.

Setting up the network begins with accessing the web-based configuration utility. Users can navigate the intuitive interface to configure system settings, manage VLANs, and monitor traffic statistics in real-time. The switch offers comprehensive security features including 802.1X authentication, ACLs, and secure shell protocols to protect sensitive data. Administrators can easily update firmware or language packs using HTTP, HTTPS, TFTP, or SCP methods, ensuring the device remains current with the latest features and patches.

One of the standout capabilities is the ability to monitor Etherlike and RMON statistics, providing deep insights into link errors, collisions, and bandwidth utilization. This proactive monitoring helps identify potential issues before they impact network performance. The switch also supports Green Ethernet technology to reduce power consumption when connected devices are idle. With its flexible stack management, users can assign unit IDs and configure master selection processes automatically, ensuring seamless operation even if a primary unit fails.

For network expansion, the SF500 series supports various IP routing protocols like RIP and VRRP, making it suitable for complex Layer 3 environments. The inclusion of Smartport macros allows for rapid deployment of pre-configured settings for specific device types such as IP phones or cameras. Whether managing a small office or a growing enterprise branch, this switch provides the scalability and control needed for modern network demands.

M: QW-35-FL

© Copyright 2026 Manual.ly