Manual.ly Logo

Cisco Nexus 9372PX Manual

0.0 · 0 Ratings

PDF manual · 64 Pages

English

M: OA-GPT-54-NAN
page

/ 64

Loading...
f44a05b1ab9f8ecef37055c997a82c00b313 page 1e
Statement 1024—Ground Conductor
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available.
Warning
Statement 1046—Installing or Replacing the Unit
When installing or replacing the unit, the ground connection must always be made first and disconnected
last.
Warning
Before You Begin
Before you can ground the chassis, you must have a connection to the earth ground for the data center building.
Step 1
Use a wire-stripping tool to remove approximately 0.75 inch (19 mm) of the covering from the end of the grounding
wire.
Step 2
Insert the stripped end of the grounding wire into the open end of the grounding lug, and use a crimping tool to crimp
the lug to the wire (see Callout 2 in the following figure). Verify that the ground wire is securely attached to the grounding
lug by attempting to pull the wire out of the crimped lug.
2 M4 screws used to secure the grounding lug to the
chassis
3Chassis grounding pad1
Grounding cable, with 0.75 in. (19 mm) of insulation
stripped from one end, inserted into the grounding
lug and crimped in place
2
Cisco Nexus 9372PX and 9372PX-E ACI-Mode Switch Hardware Installation Guide
20
Installing the Switch Chassis
Grounding the Chassis

Chat with your Cisco Nexus 9372PX manual using AI

Get instant AI answers from your Cisco Nexus 9372PX manual

Ask anything about the Cisco Nexus 9372PX. Answers come from this manual, with the pages they are based on.

Nexus 9372PX Maintenance Schedule

Regularly
Clean transceiver and optical cable connectors

Clean connectors regularly depending on the environment; clean if exposed to dust or accidentally touched. Use wet or dry cleaning techniques.

Show in the manual (page 30)
Regularly
Inspect transceivers and fiber ends

Inspect routinely for dust and damage. If damage is suspected, clean and inspect fiber ends under a microscope.

Show in the manual (page 30)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Nexus 9372PX?

Yes No

Frequently Asked Questions

A

It is designed for high-density data center networking, especially leaf-spine or aggregation use cases. It provides 48 SFP+ ports for access connections and 6 QSFP+ ports for higher-speed uplinks.

Is this answer helpful?

A

Yes. The chassis supports redundant power supplies and multiple fan modules, and they are hot-swappable. That allows maintenance without immediately taking the switch offline, as long as replacement rules are followed.

Is this answer helpful?

A

No. The switch must use power supplies of the same type. AC and DC modules cannot be mixed in the same chassis, and the airflow direction must also match across all installed modules.

Is this answer helpful?

A

The switch supports port-side intake and port-side exhaust airflow. The installed fan and power modules must all use the same airflow direction, and the rack must be arranged to match hot-aisle or cold-aisle placement.

Is this answer helpful?

A

Yes. The switch is intended for ACI fabric roles, including leaf-to-spine connectivity and APIC integration. The topology guidance emphasizes connecting leaf switches to all spine switches in the fabric.

Is this answer helpful?

A

Confirm rack depth, clearances, grounding, temperature, humidity, power capacity, and supported cabling. Also inspect the shipment, verify fan and power module airflow color, and make sure the rack is secured.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 48 SFP+ ports and 6 QSFP+ ports provide dense access and uplink flexibility in just 1RU.
  • Redundant hot-swappable fans and power supplies help keep the switch online during maintenance.
  • Clear airflow, grounding, and rack guidance supports stable deployment in data centers.
  • Console, USB, and management ports make initial setup and troubleshooting easier.
VS

Disadvantages

  • Airflow direction must match across all fans and power supplies, which limits mixed configurations.
  • AC and DC power supplies cannot be mixed in the same chassis.
  • Rack space, cooling, and power planning must be precise to avoid overheating or shutdowns.
  • Some 1G/10G connections may require QSFP-to-SFP adapters and compatible optics.
M: OA-GPT-54-NAN

Product Specification

Function

Switch, SAN Switch

Type

Standalone, Rackmount (via mounting brackets)

Network ports

48x SFP+, 6x QSFP+

Speeds

48x SFP+ (1G/10Gb/s), 6x QSFP+ (40Gb/s)

PoE

N/A

Backplane

1.44Tb/s, 1.15Gp/s, 25MB packet buffer, 96k Mac addresses

Officially supported standards

IGMP

Configuration

Web interface, Console, Serial (RJ-45, 2x USB-A 2.0), Network (RJ-45, dedicated, 10/100/1000Base-T)

Cooling

Active, 4x fans (1.57 in, 1x hot-plug each)

Dimensions (WxHxD)

17.28x1.73x22.48in, 1U

Weight

22.29 lb

Color

Silver

Special features

Metal housing, removable mounting brackets, firmware updates possible, redundant power supply (redundant power input), 2x hot-plug power supplies

Manufacturer's warranty

One year

M: OA-GPT-54-NAN

Product Description

Cisco Nexus 9300 Rackmount 40G Managed Switch, 48x SFP+, 6x QSFP+ Manual

The Cisco Nexus 9300 Rackmount 40G Managed Switch, 48x SFP+, 6x QSFP+ Manual highlights a compact, high-density platform built for modern data center fabrics. In a 1RU chassis, it combines 48 SFP+ downlink ports for 1G and 10G connectivity with 6 QSFP+ uplink ports that support 10G and 40G speeds, making it a strong fit for leaf-spine environments and aggregation layers.

What makes this switch especially practical is its flexible design. It supports redundant, hot-swappable fan and power modules, so the system can keep running while key components are replaced. Airflow options are clearly labeled, helping teams align the switch with hot-aisle or cold-aisle layouts. That matters in dense racks where cooling and cable routing are just as important as raw port count.

The platform is also built with operational discipline in mind. It includes a dedicated management port, console access, USB ports for configuration handling, and clear LED indicators for status, fans, power, and ports. For network teams, this means easier staging, troubleshooting, and maintenance during deployment and day-to-day use.

In ACI-style deployments, the switch is designed to connect leaf nodes to APIC controllers and spine switches with predictable forwarding behavior. The guidance emphasizes clean cable management, grounded installation, proper rack clearance, and power planning, which are all essential for stable performance in enterprise environments. It also supports a wide range of transceivers, adapters, and cabling options, giving administrators room to tailor connectivity to their infrastructure needs.

Beyond performance, the manual reinforces best practices for reliability: keep airflow directions consistent, avoid mixing AC and DC power supplies, maintain dust-free optics, and verify site conditions such as temperature, humidity, rack depth, and grounding. These details help the switch deliver dependable service in demanding environments.

Notes

  • Best suited for data centers, network aggregation, and ACI fabric designs.
  • Verify airflow orientation before installation to avoid thermal issues.
  • Use supported transceivers and cables for the intended link speed.

Quick Summary

A dense, rack-ready Cisco switch with strong port flexibility, redundancy, and ACI-oriented deployment guidance. It is built for teams that need efficient 40G uplinks, scalable 10G access, and reliable maintenance-friendly hardware.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly