Cisco Nexus 93240YC-FX2 Manual
PDF manual · 60 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Cisco Nexus 93240YC-FX2 manual using AI
Get instant AI answers from your Cisco Nexus 93240YC-FX2 manual
Ask anything about the Cisco Nexus 93240YC-FX2. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Nexus 93240YC-FX2?
Yes NoFrequently Asked Questions
It is designed for data center deployments where high port density, strong uplink capacity, and reliable cooling are important. The guidance focuses on rack installation, airflow planning, and continuous operation in controlled environments.
Is this answer helpful?
The switch provides 48 SFP28 ports for 1/10/25G connectivity and 12 QSFP28 ports for 40/100G uplinks. This mix supports both access-layer and high-speed aggregation roles.
Is this answer helpful?
Yes, the text indicates that fan modules and power supplies are field-replaceable. Replacement is possible during operation as long as the remaining modules keep the system within its required airflow and power conditions.
Is this answer helpful?
All fan and power modules must use the same airflow direction. If airflow is mixed or the switch is installed in the wrong aisle, the unit can overheat and shut down.
Is this answer helpful?
Install and ground the chassis, connect a console, power on the switch, and complete the initial configuration. You must assign a management IP address before using network management features.
Is this answer helpful?
The switch supports AC, DC, and HVAC/HVDC power module options, but the installed modules must match each other. Redundant power planning is emphasized, especially for n+1 or n+n designs.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- High port density with 48 SFP28 and 12 QSFP28 interfaces for flexible data center designs.
- Supports redundant power and field-replaceable fans, helping reduce service interruptions.
- Clear installation guidance covers grounding, airflow, rack fit, and power planning.
- Multiple airflow and power options make it easier to match hot-aisle or cold-aisle layouts.
Disadvantages
- All installed fans and power supplies must share the same airflow direction, limiting mixed configurations.
- Power planning is strict, and redundant designs require careful circuit and source separation.
- Rack space, clearance, and grounding requirements add setup complexity for smaller sites.
Product Specification
Function
Switch, SAN switch
Type
Standalone, Rackmount (via mounting brackets)
Network ports
48x SFP28, 12x QSFP28
Speeds
48x SFP28 (1G/10G/25Gb/s), 12x QSFP28 (40G/100Gb/s)
PoE
N/A
Backplane
4.8Tb/s, 1.8Gp/s, 40MB packet buffer, 256k Mac addresses
Officially supported standards
802.1AX, 802.1D, 802.1Q, 802.1AE, 802.1p, 802.3ab, 802.3ae, IGMP
Configuration
Web interface, Console, serial (RJ-45, USB-A 2.0), Network (SFP+, RJ-45, dedicated, 10/100/1000Base-T)
Cooling
active, 5x fans (1.57in, 1x hot-plug each)
Dimensions (WxHxD)
17.28x2.09x23.27in, 1.25HE
Weight
18.74 lb
Color
silver
Special features
Metal housing, removable mounting brackets, firmware updates possible, redundant power supply (redundant power input), 2x hot-plug power supply
Manufacturer warranty
one year
Note
For this device, "link aggregation" was officially specified with the obsolete standard IEEE802.3ad. Since 2008, this function is no longer managed by the IEEE "Working Group 3" (IEEE 802.3, CSMA/CD - Ethernet), but by "Working Group 1" (IEEE 802.1, High Level Interface - Internetworking) and is technically unchanged defined via IEEE 802.1AX.
Product Description
Cisco Nexus 9300-FX2 MACsec Rackmount 100G Managed Switch, 48x SFP28, 12x QSFP28 Manual
The Cisco Nexus 9300-FX2 MACsec Rackmount 100G Managed Switch, 48x SFP28, 12x QSFP28 Manual describes a high-density data center switch built for performance, flexibility, and reliable day-to-day operations. Designed for modern network fabrics, this platform blends 1/10/25G access connectivity with high-speed 40/100G uplinks, making it a practical fit for leaf-spine designs, aggregation layers, and demanding enterprise environments.
What stands out immediately is the balance between port density and operational simplicity. The switch provides 48 SFP28 ports for server and storage connectivity, plus 12 QSFP28 ports for high-bandwidth uplinks. That mix gives teams room to scale without redesigning the network around a single speed tier. It also supports multiple template configurations, so administrators can tailor the hardware to changing traffic patterns and deployment goals.
Another strong point is serviceability. The chassis is built for rackmount installation, and the guidance emphasizes clear airflow planning, grounding, and safe access for maintenance. Fan modules and power supplies are field-replaceable, which helps reduce downtime when a component needs attention. The manual also highlights redundancy options, including paired power supplies and airflow-matched modules for hot-aisle or cold-aisle layouts.
In practical terms, this switch is not just about raw switching capacity. It is about deploying a stable, organized, and properly cooled network core that can grow with the environment. The installation guidance reinforces best practices around temperature, humidity, altitude, dust control, rack clearance, and EMI reduction, all of which matter when a switch is expected to run continuously in a busy data center.
Why it appeals to network teams
The model is especially attractive for administrators who want dense 100G uplinks, structured cable management, and operational visibility through LEDs, console access, and management interfaces. It is also designed with straightforward maintenance in mind, from initial setup to module replacement.
Notes
- Keep airflow direction consistent across fans and power supplies.
- Match power source type across installed power modules.
- Plan rack depth, clearance, and cable routing before installation.
- Use grounding and redundant power practices to improve reliability.
Search for 67,706 Manuals online
Type-in Brand or Model