Manual.ly Logo

Cisco Nexus 93180LC-EX Manual

0.0 · 0 Ratings

PDF manual · 72 Pages

English

M: OA-GPT-54-NAN
page

/ 72

Loading...
e12ec5a85709cbdab8838f19fa83e2eb18cd page 1
Cisco Nexus 93180LC-EX ACI Mode Hardware Installation Guide
First Published: 2017-01-31
Last Modified: 2017-11-22
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Chat with your Cisco Nexus 93180LC-EX manual using AI

Get instant AI answers from your Cisco Nexus 93180LC-EX manual

Ask anything about the Cisco Nexus 93180LC-EX. Answers come from this manual, with the pages they are based on.

Nexus 93180LC-EX Maintenance Schedule

As needed
Clean transceiver connectors

Clean optical connectors regularly depending on the environment, or if exposed to dust or touched.

Show in the manual (page 32)
As needed
Inspect fiber ends

Inspect routinely for dust and damage; clean and inspect under a microscope if damage is suspected.

Show in the manual (page 32)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Nexus 93180LC-EX?

Yes No

Frequently Asked Questions

A

It is designed as a high-speed ACI leaf switch for data center fabrics. The platform connects endpoints and uplinks into a leaf-spine architecture while supporting redundancy, manageability, and structured cabling.

Is this answer helpful?

A

Airflow must match across fans and power supplies to prevent overheating. The switch is intended to draw air from the cold aisle and exhaust it to the hot aisle, so module orientation must be planned carefully.

Is this answer helpful?

A

No. The switch requires matching power source types within the chassis. AC, DC, and HVAC/HVDC modules should not be mixed, and airflow direction must also remain consistent across all modules.

Is this answer helpful?

A

Yes, fan modules and power supplies can be replaced during operation if the remaining modules keep the system running. The replacement part must match the installed airflow and power requirements.

Is this answer helpful?

A

If the switch is installed in a properly grounded rack, the chassis is grounded through the metal-to-metal connection. If not, a customer-supplied grounding cable should be attached to the grounding pad.

Is this answer helpful?

A

Verify rack mounting, grounding, airflow direction, module seating, and compatible power cabling. After power-up, confirm that LEDs show normal status and that the system boots without error messages.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Compact 1-RU design suits dense rack environments without sacrificing service access.
  • Flexible port and airflow options help align the switch with different data center layouts.
  • Hot-swappable fans and redundant power improve uptime and simplify maintenance.
  • ACI-oriented design supports structured leaf-spine deployments and scalable fabric builds.
VS

Disadvantages

  • All installed fans and power supplies must share the same airflow direction, limiting mixed setups.
  • The switch must be installed carefully with proper grounding and rack clearance requirements.
  • Power source and power-supply types cannot be mixed, so planning is needed before deployment.
  • Some USB device types and power draws are not supported, which can restrict accessory use.
M: OA-GPT-54-NAN

Product Specification

Function

Switch, SAN switch

Type

Standalone, Rackmount (via mounting brackets)

Network ports

14x QSFP+, 18x QSFP+/QSFP28

Speeds

32x QSFP+ (40G/50Gb/s), 18x QSFP28 (40G/100Gb/s)

PoE

N/A

Backplane

3.6Tb/s, 2.6Gp/s, 40MB packet buffer, 256k Mac addresses

Officially supported standards

802.1AX, 802.1D, 802.1Q, 802.1p, 802.3ab, 802.3ae, IGMP

Configuration

Web interface, Console, Serial (RJ-45, USB-A 2.0, rear), Network (SFP, RJ-45, dedicated, 10/100/1000Base-T, rear)

Cooling

active, 4x fans (1.57in, 1x hot-plug each)

Dimensions (WxHxD)

17.28x1.73x22.48in, 1U

Weight

17.20 lb

Color

silver

Special features

Metal housing, removable mounting brackets, firmware updates possible, redundant power supply (redundant power feed), 2x hot-plug power supply units

Manufacturer's warranty

one year

Note

For this device, "link aggregation" was officially specified with the obsolete standard IEEE802.3ad. Since 2008, this function is no longer managed by the IEEE "Working Group 3" (IEEE 802.3, CSMA/CD - Ethernet), but by "Working Group 1" (IEEE 802.1, High Level Interface - Internetworking) and technically defined unchanged via IEEE 802.1AX.

M: OA-GPT-54-NAN

Product Description

Cisco Nexus 9300-EX Rackmount 50G Managed Switch

The Cisco Nexus 9300-EX Rackmount 50G Managed Switch, 32x QSFP+ or 18x QSFP28 Manual reflects a platform built for demanding data center environments where scale, airflow control, and dependable connectivity matter most. In the ACI-focused Nexus family, this switch is positioned as a compact 1-RU leaf device with flexible high-speed port options and the resilience needed for modern fabric architectures.

At its core, the switch is designed to support dense uplink and downlink configurations while keeping deployment practical. The hardware layout allows network teams to match port direction, cabling style, and rack placement to their environment, whether they are optimizing for cold-aisle intake or hot-aisle exhaust. That flexibility makes the platform a strong fit for staged expansions, high-throughput aggregation, and structured rack designs where service access is just as important as raw performance.

One of the biggest strengths of this switch is operational discipline. The guidance around grounding, airflow consistency, and power redundancy shows that the device is meant to be installed with long-term stability in mind. Dual power supplies, hot-swappable fan modules, and clear LED indicators help simplify maintenance while reducing downtime. For teams running mission-critical workloads, those details are often as valuable as port speed.

The broader value of the switch is its balance of power and manageability. It supports structured ACI fabric design, optional console and out-of-band management, and careful transceiver handling for optical reliability. In practice, that means the platform can serve as a dependable building block for leaf-spine networks, especially where consistency, troubleshooting clarity, and hardware serviceability are top priorities.

Notes

  • Match airflow direction across all installed modules before bringing the switch into service.
  • Use proper rack clearance to protect cabling, cooling, and maintenance access.
  • Keep transceivers and fiber clean to preserve signal quality and reduce wear.
  • Follow grounding and power guidance closely to avoid shutdowns or electrical risk.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly