Manual.ly Logo

Cisco IE 5000 Manual

0.0 · 0 Ratings

PDF manual · 74 Pages

English

M: OA-GPT-54-NAN
page

/ 74

Loading...
7b5bea98746cda5b919d5055a55736086a61 page 2
ii
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE
WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE
ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE INCORPORATED HEREIN BY
THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR
CISCO REPRESENTATIVE FOR A COPY.
The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.
The following information is for FCC compliance of Class B devices: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If the equipment causes interference to radio or television reception, which can be determined by turning the equipment off
and on, users are encouraged to try to correct the interference by using one or more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.
Modifications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB)
as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of
California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE
PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL
DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR
INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any
examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes
only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
All printed copies and duplicate soft copies are considered un-Controlled copies and the original on-line version should be referred to for latest
version.
Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at
www.cisco.com/go/offices.
© 2018 Cisco Systems, Inc. All rights reserved.

Chat with your Cisco IE 5000 manual using AI

Get instant AI answers from your Cisco IE 5000 manual

Ask anything about the Cisco IE 5000. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend IE 5000?

Yes No

Frequently Asked Questions

A

It is designed for industrial Ethernet networks that need rugged, reliable switching. Common uses include factory automation, rail systems, transportation infrastructure, and other harsh or space-constrained deployments.

Is this answer helpful?

A

The switch combines 12 RJ-45 Gigabit copper ports with 16 SFP ports, giving it strong flexibility for mixed copper and fiber connections across industrial networks.

Is this answer helpful?

A

Yes. The switch supports PoE/PoE+ on its copper ports, making it useful for powering compatible devices such as IP phones, access points, cameras, and industrial endpoints.

Is this answer helpful?

A

Yes. It supports CLI, SNMP, Device Manager, and Cisco Prime Infrastructure, so administrators can configure, monitor, and troubleshoot it in different ways.

Is this answer helpful?

A

Yes, but only when installed according to the stated hazardous-location rules, including proper enclosure, grounding, power handling, and environmental constraints.

Is this answer helpful?

A

LED indicators, modular power supplies, removable SFPs, and an SD flash card slot help with monitoring, replacement, and recovery while reducing downtime.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Rugged construction suits industrial, transportation, and harsh-environment deployments.
  • 12 RJ-45 and 16 SFP ports provide flexible device and uplink connectivity.
  • PoE+ support helps power endpoints while reducing extra cabling and adapters.
  • Redundant power options improve availability in critical network installations.
VS

Disadvantages

  • Installation and servicing require careful safety procedures and trained personnel.
  • Hazardous-location use adds enclosure, grounding, and clearance requirements.
  • SFP module compatibility and power limits must be checked before deployment.
  • Advanced setup may be overkill for small, simple office network environments.
M: OA-GPT-54-NAN

Product Specification

Function

Switch

Type

Standalone, Rackmount (via mounting brackets)

Network ports

12x RJ-45, 16x SFP

Speeds

12x RJ-45 (10/100/1000Base-T), 16x SFP (100M/1Gb/s)

PoE

12x RJ-45 PoE+ (12x 30W), total: 360W

Backplane

64Gb/s, 41.67Mp/s, 16k MAC addresses

Officially supported standards

802.1AX, 802.1, 802.1AB, 802.1AE, 802.1D, 802.1p, 802.1Q, 802.1s, 802.1w, 802.1X, 802.3, 802.3ab, 802.3af, 802.3ah, 802.3at, 802.3u, 802.3x, 802.3z, IGMPv3

Configuration

Web interface, Console, Serial (RJ-45, USB 2.0 Mini-B), Card reader (SD Card), Configuration software, Alarm port (RJ-45), via control unit, GPS antenna connector (SMA), Analog Timing I/O Interface (BNC, IRIG), Digital Timing I/O Interface (BNC, IRIG-B), Time-of-Day Port (RJ-45, RS422)

Cooling

passive

Dimensions (WxHxD)

17.52x1.75x15.31in, 1U

Weight

13.69lb

Color

anthracite

Special features

Metal housing, removable mounting brackets, firmware updates possible, redundant power supply, screw terminals (24-60V), screw terminals (100-250V), optional redundant power supply (each with redundant power), 2x hot-plug power supply units, primary power supply not included (1x required), front-side power connection (screw terminals), remote powering, extended operating range (Temperature: -40 degrees F to 185 degrees F, Humidity: 0% to 95%), NEMA TS2, EN50121-4, IEEE 1588v2

Manufacturer warranty

five years

Note

PoE budget depends on the power supply units used.

Note #2

For this device, "link aggregation" was officially specified with the obsolete standard IEEE802.3ad. Since 2008, this function is no longer managed by the IEEE "Arbeitsgruppe 3" (IEEE 802.3, CSMA/CD - Ethernet), but by "Arbeitsgruppe 1" (IEEE 802.1, High Level Interface - Internetworking) and is technically defined unchanged via IEEE 802.1AX.

M: OA-GPT-54-NAN

Product Description

Cisco IE 5000: Rugged Switching for Demanding Industrial Networks

The Cisco IE 5000 LAN Base Hardened Industrial Rackmount Gigabit Managed Switch, 12x RJ-45, 16x SFP, PoE+ Manual points to a platform built for places where ordinary office networking gear would struggle. Designed for industrial Ethernet, this switch is suited to harsh environments such as factory floors, rail systems, intelligent transportation sites, and process automation spaces. It combines resilient hardware, flexible port options, and practical management tools in a compact rack-mount form.

What makes the IE 5000 appealing is its balance of speed and durability. The mix of 12 copper Gigabit RJ-45 ports and 16 SFP uplink/downlink ports gives teams room to connect a wide range of devices, from PLCs and HMIs to sensors, drives, and cameras. With PoE+ support, the switch can also power compatible endpoints directly, simplifying cable runs and reducing the need for separate power adapters in remote or crowded installations.

Cisco also emphasizes operational stability. The platform supports redundant power supply options, clear LED indicators, and modular transceiver support, helping technicians monitor status and respond quickly when conditions change. Its management choices are equally practical: CLI, SNMP, Device Manager, and Cisco Prime Infrastructure all provide paths for setup and ongoing control. That flexibility makes it easier to fit the switch into both small standalone deployments and larger managed industrial networks.

Another strength is its attention to field service. Features like hot-swappable modules, diagnostic LEDs, and an SD flash card slot help reduce downtime and simplify recovery. Installation guidance also reflects real industrial needs, including rack, wall, and hazardous-location considerations. For teams that need a hardened managed switch with dependable connectivity and strong deployment versatility, the IE 5000 is a serious option.

Notes

  • Best suited for industrial and transportation environments.
  • PoE+ can reduce power-cabling complexity for connected devices.
  • Redundant power and modular design support uptime-focused deployments.
  • Follow grounding, clearance, and hazardous-area rules during installation.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly