Manual.ly Logo

ChiliTec LaBomba 1 Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: QW-35-FL
page

/ 4

Loading...
4ab920bae8aa4bbc13a98a10643c1680e531 page 2
Vervielfältigung nur mit Genehmigung durch ChiliTec GmbH, Lehre
Bedienungsanleitung
WEEE Reg.-Nr. 25841852
1. Installation (Sicherheitshinweise siehe auch Seite1)
Die Pumpe kann (...falls der Akku mal leer sein sollte) direkt über den Kfz-Zigarettenzünder
betrieben werden. Ein Betrieb über Netzteil ist nicht möglich.
1. Verschrauben Sie zuerst die Adapterleitung mit der Pumpe. Danach den passenden
Adapter für Ihre gewünschte Anwendung z.B Fahrradventil aufschrauben.
2.Schrauben Sie jetzt das Adapterstück am Fahrradventil auf.
3. Drücken Sie die Taste „Unit“- Das Display zeigt den momentan auf dem Fahrradreifen
vorhandenen Druck an. Durch weiteres Drücken der Taste „Unit“ wechseln Sie die Einheiten
(BAR, PSI, KPA oder kg/cm²). Es werden hier die die jeweiligen Echtwerte nach Einheit ange-
zeigt. Wählen Sie also die Einheit z.B. „BAR!“ aus.
Der Echwert wird weiterhin angezeigt.
4. Stellen Sie jetzt ausgehend vom Echtwert mit den Tasten ± den von Ihnen gewünschten
Druck ein. Z.B. für Ihren Fahrradreifen 2,5 BAR. Jeder einzelne Druck auf die Tasten ± passt
den Wert in kleinen Schritten an, langes Drücken in großen Schritten.
Das Display, bzw. der neue eingestellte Wert blinkt nun für etwa 4 Sekunden.
5. Nachdem die Zahl nicht mehr blinkt, drücken Sie nun die EIN/AUS Taste, der
Pumpvorgang beginnt nun, die LEDs gehen an. Die Pumpe stoppt automatisch bei erreichen
der von Ihnen voreingestellten Wertes von 2,5 BAR.
6. Schalten Sie die Pumpe am EIN/AUS wieder aus.
7. Lagern Sie Ihre Pumpe in trockenen Räumen bei Raumtemperatur.
1. Allgemeine Hinweise (Sicherheitshinweise)
Benutzen Sie das Gerät nicht in einer explosiven oder entflammungssensibelen Umgebung.
(z.B. nicht an Tankstellen, nicht Untertage, nicht in unbelüfteten Räumen).
Bitte unterbrechen Sie den Pumpvorgang nach spätetens 8 Minuten. Alle 8 Minuten gönnen
Sie der Pumpe bitte eine Pause für ebenfalls 8 Minuten! Dies schont das Material und
verlängert die Lebendauer Ihrer Pumpe und des integrierten Akkus.
Bitte stoppen Sie den Pumpvorgang für 30 Minuten wenn das Gerät heiß geworden ist oder
wenn Sie komische (nicht dem Normalgeräusch entsprechende) Geräusche hören.
Halten Sie das Gerät entfernt von Kindern, Hitze, Kälte, Regen, Wasser.
Das Gerät darf nicht herunterfallen, dadurch kann das Gerät zerstört werden.
Laden Sie das Gerät mindestens alle 0,5 Jahre, auch bei nicht Benutzung, auf.
Bei Benutzung über den Zigarettenanzünder Ihres Autos, muss der Motor des Kfz laufen
-Produktdatenblatt- Seite 2 von 2
Sicherheits-Hinweise und wichtige Informationen!
Um die Sicherheit zu jeder Zeit zu gewährleisten, und das volle Leistungsspektrum des Gerätes
zu nutzen, lesen Sie sich bitte die Sicherheitshinweise sorgfälltig und in Ruhe durch !

Chat with your ChiliTec LaBomba 1 manual using AI

Get instant AI answers from your ChiliTec LaBomba 1 manual

Ask anything about the ChiliTec LaBomba 1. Answers come from this manual, with the pages they are based on.

LaBomba 1 Maintenance Schedule

Remind me when maintenance is due
Every 6 Months
Charge the battery

Charge the device at least every 0.5 years, even when not in use, to maintain battery health.

Before Each Use
Inspect for damage

Check the product before each use for damages. If damaged, have it checked by a specialist or replace it.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend LaBomba 1?

Yes No

Frequently Asked Questions

A

The pump reaches a maximum pressure of 10 Bar or 150 PSI, sufficient for most vehicle tires and inflatables.

Is this answer helpful?

A

Charging takes approximately 1.5 hours whether using the 230V wall adapter or the 12V car adapter.

Is this answer helpful?

A

Yes, if the battery is empty, the pump can be operated directly via the 12V car cigarette lighter adapter.

Is this answer helpful?

A

Do not use in explosive areas, stop every 8 minutes to cool down, and never leave the device unattended near children.

Is this answer helpful?

A

Yes, the pump automatically stops when it reaches the preset pressure value displayed on the screen.

Is this answer helpful?

A

The device supports BAR, PSI, KPA, and kg/cm² which can be toggled using the Unit button.

Is this answer helpful?

A

You should charge the device at least every six months even if it has not been used to maintain battery health.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Maximum pressure of 10 Bar / 150 PSI handles cars and bikes easily
  • Digital display supports BAR, PSI, KPA, and kg/cm² units
  • Fast recharge time of roughly 1.5 hours via wall or car adapter
  • Includes 4 distinct adapters for balls, bikes, cars, and mattresses
  • Robust brushed stainless steel housing protects internal components
VS

Disadvantages

  • Operating noise level exceeds 80dB which may be disruptive
  • Requires mandatory 8-minute cooling break after every 8 minutes of use
  • Cannot run on direct AC power without the internal lithium battery
  • Must keep car engine running when using the 12V cigarette lighter port
  • Device must be stored in dry conditions to prevent damage
M: QW-35-FL

Product Specification

Type

Air pump

M: QW-35-FL

Product Description

ChiliTec LaBomba 1 Pump Review

The ChiliTec LaBomba 1 Pump is a versatile, high-performance air pump designed for adventurers and vehicle owners who need reliable inflation on the go. This device features a powerful lithium-ion battery housed in a durable brushed stainless steel case, making it ready for use anywhere from remote trails to busy highways. Whether you need to inflate bicycle tires, motorcycle wheels, car tires, air mattresses, inflatable boats, or sports balls, this pump handles it all with ease.

One of the standout features is the digital display that allows users to preset maximum pressure. The interface supports multiple units including BAR, PSI, KPA, and kg/cm², ensuring compatibility with various international standards. The pump delivers a maximum pressure of 10 Bar or 150 PSI, powered by an integrated 12V/700mAh battery. It comes equipped with four different adapters to suit various valve types, along with a storage bag, a 230V charger, and a 3-meter long 12V car adapter cable. Charging is fast, taking only about 1.5 hours via either the wall adapter or the car adapter.

Safety is a top priority with the LaBomba 1 Pump. Users are advised not to operate the device in explosive environments like gas stations and to take breaks every eight minutes to prevent overheating. The device automatically stops once the preset pressure is reached, adding a layer of convenience and safety. Always store the unit in a dry place at room temperature and ensure it is charged at least every six months even if unused.

Key Notes

  • Ensure the car engine runs when using the cigarette lighter adapter.
  • Do not cover the device during operation.
  • Keep away from children and animals while in use.

Pros and Cons

Pros

  • Powerful 10 Bar max pressure suitable for cars and bikes.
  • Digital display with multiple unit options (BAR, PSI, etc.).
  • Fast charging time of approximately 1.5 hours.
  • Includes 4 different adapters for various needs.
  • Durable brushed stainless steel casing.

Cons

  • Operating noise exceeds 80dB which can be loud.
  • Requires an 8-minute break after every 8 minutes of use.
  • Cannot operate directly from mains power without the battery.
  • Heavy reliance on battery means no backup if empty unless plugged into car.

Frequently Asked Questions

What is the maximum pressure the ChiliTec LaBomba 1 Pump can reach? The pump reaches a maximum pressure of 10 Bar or 150 PSI, sufficient for most vehicle tires and inflatables.

How long does it take to charge the battery? Charging takes approximately 1.5 hours whether using the 230V wall adapter or the 12V car adapter.

Can I use this pump without the battery? Yes, if the battery is empty, the pump can be operated directly via the 12V car cigarette lighter adapter.

What safety precautions should I follow? Do not use in explosive areas, stop every 8 minutes to cool down, and never leave the device unattended near children.

Does the pump have an auto-stop feature? Yes, the pump automatically stops when it reaches the preset pressure value displayed on the screen.

What units of measurement are supported? The device supports BAR, PSI, KPA, and kg/cm² which can be toggled using the Unit button.

How often should I charge the pump if not used? You should charge the device at least every six months even if it has not been used to maintain battery health.

M: QW-35-FL

© Copyright 2026 Manual.ly