ChiliTec BRIKX Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your ChiliTec BRIKX manual using AI
Get instant AI answers from your ChiliTec BRIKX manual
Ask anything about the ChiliTec BRIKX. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend BRIKX?
Yes NoFrequently Asked Questions
They are intended for integrated lighting in paving, paths, driveways, terraces, steps, fountains, and facade-related outdoor areas. Choose a location where water will not collect and where a stable gravel drainage base can be created.
Is this answer helpful?
Yes. The lights are specified as walkable and driveable with a load capacity of 10 kN. The installation sleeve must be firmly supported in a properly prepared gravel bed so the fitting does not sink when loaded.
Is this answer helpful?
All listed BRIKX models operate directly from a 230 V, 50 Hz supply. Electrical connection and work on the circuit must be performed by a qualified electrician with the power safely isolated.
Is this answer helpful?
They have an IP67 protection rating. Suitable IP67-rated connection boxes or cable joints and outdoor or underground-approved cables must also be used so the complete installation maintains appropriate protection.
Is this answer helpful?
Warm white versions provide approximately 2900 K to 3000 K light for a softer appearance. Neutral white versions provide 4500 K light for a cooler, clearer effect. Both color options are available in 10 cm and 20 cm formats.
Is this answer helpful?
No. The listed BRIKX models are non-dimmable. They switch on at full brightness in under one second and should be used with a compatible standard 230 V switched circuit.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- IP67 protection supports use in outdoor paved areas exposed to dust and water.
- Rated as walkable and driveable up to 10 kN for paths and private driveway applications.
- Warm white and neutral white options allow different lighting moods and visibility levels.
- Four variants offer compact or elongated formats with outputs from about 90 to 300 lumens.
- Includes an installation sleeve and reaches full brightness in less than one second.
Disadvantages
- Requires direct 230 V installation by qualified electrical personnel.
- Non-dimmable design offers no brightness adjustment.
- Correct gravel drainage and IP67 cable connections are necessary for reliable installation.
- The 20,000-hour rated life may be lower than some premium long-life exterior LED systems.
- Damaged units must not be used, opened, or repaired by unqualified users.
Product Specification
Type
Floor lamp
Integrated LEDs
yes
Socket
no
Material
Plastic
Color
white
Design
square
IP rating
IP67
Protection class
2
Product Description
ChiliTec BRIKX Paving Stone LED Ground Light - Read, Download & Print Free
Transform driveways, paths, patios, stair edges, and landscaped outdoor areas with the ChiliTec BRIKX Paving Stone LED Ground Light. Designed to blend into paved surfaces, these illuminated paving stones create practical orientation lighting while adding a clean, modern accent after dark. Their compact square format makes them suitable for new projects as well as integration into existing paving layouts.
Built for outdoor surfaces
BRIKX ground lights are rated IP67 for protection against dust and temporary water immersion. They are also designed to be walked on and driven over, with a stated load capacity of 10 kN. This makes them a useful choice for private driveways, garden paths, entrance areas, terraces, and other locations where light must remain close to the ground without obstructing movement.
Each unit includes an installation sleeve and an approximately 25 cm connection cable. The broad 120-degree beam distributes light across the surrounding surface rather than creating a narrow spotlight effect. With color options in warm white and neutral white, BRIKX lighting can support either a welcoming atmosphere or a clearer, more functional appearance.
Four sizes and light colors
The range includes 10 x 10 cm and 20 x 10 cm models. The compact 10 cm versions use 1 W and provide around 90 to 92 lumens, while the longer 20 cm options use 2.6 W and provide up to 300 lumens depending on the selected color temperature. Warm white models deliver approximately 2900 K to 3000 K light, while neutral white versions provide 4500 K illumination.
All versions operate directly from a 230 V, 50 Hz supply and are non-dimmable. They offer a color rendering index above 80, a rated life of 20,000 hours, and fast full brightness in under one second. These characteristics make the lights suited to regular evening use around access routes and exterior living spaces.
Installation and care notes
Because this is a 230 V installation, connection work must be completed by a qualified electrician with the circuit isolated. Outdoor and underground-rated cables, IP67-rated connection protection, and secure strain-free wiring are essential. A drainage bed of coarse gravel at least 10 cm deep should be prepared beneath and around the installation sleeve to prevent standing water and provide stable support.
Do not modify, open, or operate a damaged unit. For cleaning, disconnect the power and use a dry lint-free cloth, or a slightly damp cloth for heavier dirt. Avoid chemical cleaners and abrasive products. With correct installation and drainage, ChiliTec BRIKX paving lights offer a durable way to define outdoor spaces with understated, integrated illumination.
Search for 67,706 Manuals online
Type-in Brand or Model