Manual.ly Logo

Chicco Fold&Go i-Size Manual

0.0 · 0 Ratings

PDF manual · 164 Pages

English

M: QW-35-FL
page

/ 164

Loading...
3f2ccd901da0b7bc86f489810250e556d557 page 16
22
backrest, removing the loops from the right
and left pins (Fig. 31).
3. Complete the removal of the fabric from the
bottom upwards, removing the cover of the
headrest paying attention to the elastic be-
hind the backrest (Fig. 32).
SEAT
1. Remove the cover from the seat by removing
the plastic proles from the right and left belt
guides (Fig. 33).
2. Release the plastic aps from under the seat
(Fig. 34).
3. Pull the child car seat fabric out from the Belt
Positioner (Fig. 35).
To cover the car seat, proceed in reverse order
following the instructions above.
7.5 MAINTENANCE AND CLEANING THE
FABRIC COVER
The cleaning and maintenance of the product
must only be carried out by an adult.
HOW TO CLEAN THE FABRIC COVER
The child car seat’s fabric cover can be removed
and washed. Please refer to the care label for in-
structions on washing the fabric:
Machine washable at 30°C
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
• Never use abrasive detergents or sol-
vents.
• Do not dry the fabric cover within a dryer, let it
dry without squeezing it.
The fabric cover must only be replaced with
another cover approved by the manufacturer,
since it is an integral part of the child car seat
and, therefore, one of its safety elements.
WARNING! To ensure the safety of the child car
seat, never use it without its fabric cover.
30° C
30° C
30° C
30° C
To adjust:
1. Press the backrest height adjustment lever
(L) on the back of the headrest with one
hand and raise/lower the backrest to adapt it
to the height of the child’s shoulders (Fig. 27).
2. Release the lever verifying that it has been
engaged in the desired position.
7.2 ADJUSTING THE BACKREST WIDTH
It is possible to adjust the width of the backrest
to better adapt the child car seat to the size of
your child. To adjust, hold down the backrest
height adjustment lever (L) on the back of the
headrest with one hand and simultaneously
operate the backrest width adjustment wheel
(K) which can be seen above the headrest
(g. 28).
After adjusting the width of the backrest, check
that it is secured correctly in the desired position.
7.3 ADJUSTING THE BACKREST/SEAT ANGLE
You can recline the child car seat using the re-
clining adjustment lever (I). The child car seat
allows reclining the backrest/seat in 4 posi-
tions to allow the child to travel as comforta-
bly as possible. To carry out the adjustment
operations more easily, it is recommended to
remove the child from the seat; otherwise the
operation will be more dicult. To return the
car child seat to a vertical position, use the
reclining adjustment lever (I) to push the seat
towards the backrest of the car seat (Fig. 29).
WARNING! After adjusting the reclining angle,
check that the car safety belts are correctly
tensioned and at most 2 cm above the child’s
shoulder (Fig. 26).
7.4 REMOVING BACKREST/SEAT COVERS
The child car seat cover is fully removable so that
it can be machine-washed. Lift the backrest (C)
completely and widen the side aps (D).
BACKREST
1. Release the elastic loops from the respective
hooks on the upper and lower sides of the
side aps (Fig. 30) and remove the fabric
from the aps.
2. Continue by removing the central part of the

Chat with your Chicco Fold&Go i-Size manual using AI

Get instant AI answers from your Chicco Fold&Go i-Size manual

Ask anything about the Chicco Fold&Go i-Size. Answers come from this manual, with the pages they are based on.

Fold&Go i-Size Maintenance Schedule

Regularly
Check integrity of fabric cover and plastic parts

Verify seams are intact and padding does not protrude. Check plastic parts for damage or fading.

Show in the manual (page 23)
As needed
Clean the fabric cover

Machine wash at 30°C. Do not bleach, tumble dry, iron, or use abrasive detergents/solvents.

Show in the manual (page 22)
As needed
Clean the plastic parts

Wipe with a soft cloth soaked in water or neutral detergent. Never use abrasive cleaners or solvents.

Show in the manual (page 23)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Fold&Go i-Size?

Yes No

Frequently Asked Questions

A

This seat is designed for children with a height between 100 cm and 150 cm. It is not intended for infants or toddlers below this height range.

Is this answer helpful?

A

Yes, the seat can be installed using the standard three-point vehicle seat belt if your car does not have Isofix points. However, Isofix provides a more rigid connection.

Is this answer helpful?

A

Yes, the cover is fully removable and can be washed in a machine at 30 degrees Celsius. Do not use bleach, tumble dry, or iron the fabric.

Is this answer helpful?

A

The Safe Pad protects the child's neck and chest area by positioning the diagonal seat belt correctly. It is required for proper safety performance in case of an impact.

Is this answer helpful?

A

First, lower the backrest to its minimum height. Then, use the release lever to fold the backrest onto the seat base. Finally, engage the locking strap to keep it compact.

Is this answer helpful?

A

It is generally recommended to avoid installing child seats on front seats equipped with active airbags. Always consult your vehicle manual before doing so.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Folds compactly for easy transport and storage with a secure locking strap
  • Compatible with both Isofix connectors and standard three-point seat belts
  • Includes Side Safety System for enhanced protection during lateral collisions
  • Fully adjustable backrest height and width to accommodate growing children
  • Removable and machine-washable fabric cover simplifies cleaning
VS

Disadvantages

  • May not fit properly in vehicles with low rooflines for children over 135 cm
  • Requires specific Isofix anchor points for the most secure installation method
  • Safe Pad accessory must be installed correctly every single time for safety
  • Cannot be used if the vehicle has inflatable rear seat belts without checking manuals
  • Not suitable for use as a home chair, strictly for vehicle transportation only
M: QW-35-FL

Product Specification

Group

i-Size

Weight class

15-36 kg

Age group

3.5-12 years

Color

black

Harness type

Three-point safety belt

Installation

Forward-facing

Isofix

No, SureFix connectors

Features

Height and width adjustable backrest, side impact protection, adjustable seat position, rest position, removable and washable cover, installation indicators

M: QW-35-FL

Product Description

Chicco Fold&Go i-Size Black: The Ultimate Travel Companion

The Chicco Fold&Go i-Size black car seat is designed to simplify the lives of parents who are constantly on the move. Engineered for children between 100 and 150 cm in height, this advanced booster seat adheres to the strict European ECE R 129/03 safety regulations. Its sleek black finish not only looks modern but also hides everyday wear and tear effectively.

One of the standout features of this product is its innovative folding mechanism. When you need to transport the seat or store it in a compact space, the backrest folds neatly onto the seat base. A locking strap secures the folded position, and a dedicated carry handle makes lifting effortless. This portability ensures that the seat can be easily moved between different family vehicles without hassle.

Safety remains the top priority with the Fold&Go i-Size. It offers versatile installation options, compatible with both Isofix rigid connectors for a rock-solid fit and standard three-point vehicle seat belts. The seat includes a Side Safety System to provide extra protection against side impacts, ensuring your child is secure from all angles. Additionally, the Safe Pad must always be used on the diagonal belt to prevent neck injuries during sudden stops.

Comfort is equally important. The backrest height and width are fully adjustable, allowing you to customize the fit as your child grows. The recline function offers four positions, letting your little one rest comfortably during long journeys. Maintenance is straightforward, as the fabric cover is completely removable and machine washable at 30 degrees Celsius. Remember to keep the seat away from direct sunlight to preserve the material quality and color.

This car seat is more than just a restraint system; it is a reliable partner for every trip. Whether navigating city streets or embarking on a cross-country adventure, the Chicco Fold&Go i-Size black guarantees safety, comfort, and convenience for your family.

M: QW-35-FL

© Copyright 2026 Manual.ly