Manual.ly Logo

Chauvin Arnoux DigiFlex MA4000D Manual

0.0 · 0 Ratings

PDF manual · 72 Pages

English

M: QW-35-FL
page

/ 72

Loading...
953492cadb1076449db84b6449510129d22a page 10
16
WARNING, risk of DANGER! The operator must
refer to these instructions whenever this danger
symbol appears.
Equipment protected by double insulation.
Must not be applied to or removed from bare
conductors at dangerous voltages. Type B cur‑
rent sensor as per IEC 61010‑2‑032.
Battery.
The CE marking indicates conformity with
European directives, in particular LVD and EMC.
The rubbish bin with a line through it indicates
that, in the European Union, the product must
undergo selective disposal in compliance with
Directive WEEE 2002/96/EC. This equipment
must not be treated as household waste.
Definition of measurement categories:
Measurement category IV corresponds to measurements
taken at the source of low‑voltage installations.
Measurement category III corresponds to measurements
on building installations.
Measurement category II corresponds to measurements
taken on circuits directly connected to low‑voltage
installations.
PRECAUTIONS FOR USE
This instrument is protected against voltages of not more than
1000V with respect to ground in measurement category III
or 600V in CAT IV between the sensor and the conductor of
which it measures the current.
The protection provided by the instrument may be impaired
if the instrument is used other than as specified by the
manufacturer.
Do not exceed the rated maximum voltage and current or
the measurement category.
ENGLISH
Thank you for purchasing a DigiFLEX MA4000D current
meter with flexible sensor. For best results from your
instrument:
read this user’s manual carefully,
comply with the precautions for use.

Chat with your Chauvin Arnoux DigiFlex MA4000D manual using AI

Get instant AI answers from your Chauvin Arnoux DigiFlex MA4000D manual

Ask anything about the Chauvin Arnoux DigiFlex MA4000D. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend DigiFlex MA4000D?

Yes No

Frequently Asked Questions

A

The device is capable of measuring alternating current RMS values up to 4000 Amperes. It covers three specific ranges to ensure precision from 200 mA up to the maximum limit.

Is this answer helpful?

A

No, the flexible sensor is based on Rogowski coil technology which is inherently insensitive to direct current. It only measures the AC component of any signal.

Is this answer helpful?

A

To find the maximum current, press and hold the HOLD key for more than two seconds. The device will then compare subsequent readings and display the highest value found.

Is this answer helpful?

A

It uses two 1.5 V R03 (AAA) alkaline batteries or two NiMH rechargeable batteries of the same size. Alkaline batteries provide up to 70 hours of continuous operation.

Is this answer helpful?

A

Yes, it is rated for Category IV 600V and Category III 1000V. However, it must never be applied to or removed from uninsulated conductors under dangerous voltage.

Is this answer helpful?

A

It is recommended to perform a metrological check at least once a year to ensure the accuracy of the measurements remains within specified tolerances.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Flexible 350mm sensor allows easy measurement on large or hard-to-reach conductors
  • Measures high currents up to 4000A with good resolution across three ranges
  • Snap-action opening enables use with protective gloves for enhanced safety
  • Lightweight design at 130g reduces user fatigue during extended operations
  • Compliant with CAT IV 600V and CAT III 1000V safety standards
VS

Disadvantages

  • Requires periodic metrological verification to maintain calibration accuracy
  • Battery life is reduced when using NiMH rechargeable cells compared to alkaline
  • Measurement accuracy can vary slightly if the conductor is not centered perfectly
  • Does not measure DC current components as the sensor is AC-only
  • Accessories like the belt clip are sold separately and not included in the base kit
M: QW-35-FL

Product Specification

Measurement range

max. 4000A, max. 600V

Package contents

Test leads

M: QW-35-FL

Product Description

Chauvin Arnoux DigiFlex MA4000D: The Flexible Solution for High Current Measurement

The Chauvin Arnoux DigiFlex MA4000D 350mm Multimeter represents a significant advancement in electrical testing, specifically designed for measuring alternating current RMS values ranging from 200 mA up to 4000 A. This versatile instrument utilizes a flexible Rogowski coil sensor that is 35 cm long, allowing technicians to easily wrap it around conductors of various shapes and sizes, including cables, busbars, and stranded wires, without the need for disassembly.

Unlike traditional clamp meters with rigid jaws, the DigiFlex features a snap-action opening mechanism that can be operated even while wearing protective gloves. This design ensures safety and convenience in tight or awkward spaces where standard clamps might not fit. The sensor connects via a shielded cable to a compact electronic housing containing the signal processing unit, which is powered by two AAA batteries. The device offers an LCD display that provides clear readings in Arms, along with special functions like HOLD to freeze measurements and MAX to capture peak currents lasting at least 100 milliseconds.

Built for professional environments, the MA4000D adheres to strict international safety standards, including IEC 61010-2-032. It supports measurement categories up to CAT IV 600V and CAT III 1000V, ensuring reliable performance in industrial settings. The unit is lightweight at approximately 130 grams and includes a multifunction belt clip option for hands-free operation. Whether you are troubleshooting complex electrical systems or performing routine maintenance, the Chauvin Arnoux DigiFlex MA4000D delivers precision, flexibility, and durability.

Key Features Overview

  • Flexible Sensor: 350 mm length accommodates large conductors effortlessly.
  • High Capacity: Measures up to 4000 A AC with high accuracy.
  • Safety First: Double insulation and compliance with CAT IV safety ratings.
  • User Friendly: Intuitive controls with HOLD and MAX functions for detailed analysis.
  • Long Battery Life: Up to 70 hours of continuous use on alkaline batteries.

Important Notes

Always verify the integrity of the insulation before each use. Do not apply the sensor to bare conductors under dangerous voltage conditions. For optimal results, center the conductor within the flexible toroid and maintain a circular shape.

M: QW-35-FL

© Copyright 2026 Manual.ly