Chauvin Arnoux CA 771 Manual
PDF manual · 104 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Chauvin Arnoux CA 771 manual using AI
Get instant AI answers from your Chauvin Arnoux CA 771 manual
Ask anything about the Chauvin Arnoux CA 771. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend CA 771?
Yes NoFrequently Asked Questions
It indicates nominal voltages from 12 to 1000 Vac or Vdc and up to 1400 Vdc. It operates on DC and frequencies from 16.67 to 800 Hz.
Is this answer helpful?
Yes. The CA 771 detects hazardous voltage above 50 Vac or 120 Vdc even if its batteries are discharged or absent. The ELV warning indicator provides this redundant safety alert.
Is this answer helpful?
AUTO TEST checks the leads, probe tips, electronic circuit operation, and battery condition. Run it before use and again after each test to confirm the tester remains operational.
Is this answer helpful?
Yes. Hold the ohm button when no voltage is detected. The LED bargraph and buzzer indicate continuity quality across resistance ranges. Continuity detection is inhibited when voltage above 1 V is present.
Is this answer helpful?
No. Single-pole phase detection helps locate a phase on an earth-referenced network, but it is not a replacement for voltage absence testing. A non-flashing phase LED does not prove safe conditions.
Is this answer helpful?
The standard CA 771 is supplied with 2 mm test probes and a protective cap. The CA 771 IP2X version includes 4 mm IP2X protected probes, providing an additional level of contact safety.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- CAT IV 1000 V safety rating supports work on demanding low-voltage installation points.
- Detects hazardous voltage even with weak or missing batteries.
- Combines voltage, polarity, continuity, phase, phase rotation, and 30 mA RCD test functions.
- IP65 enclosure, 2 m drop resistance, and integrated work light suit field use.
- Automatic start and built-in self-test support quick, repeatable safety checks.
Disadvantages
- Indications are for detection and must not be used as precision measurements.
- Continuity testing is disabled when voltage above 1 V is present.
- The 30 mA load-switching function can heat the tester and requires cooling time.
- Phase detection only works correctly on earth-referenced networks and is not a voltage absence test.
- Outdoor use is limited to dry conditions without rain.
Product Specification
Measuring range
12-1000 V
Product Description
Chauvin Arnoux CA 771 Voltage Tester - Read, Download & Print Free
The Chauvin Arnoux CA 771 Voltage Tester is a professional two-pole safety tester designed for fast, dependable checks on low-voltage electrical installations. Built for qualified electrical workers, it provides clear LED and audible indications to support essential troubleshooting, commissioning, maintenance, and voltage absence verification tasks. Its robust CAT IV 1000 V rating makes it suitable for demanding work close to the source of an installation, including distribution equipment, protection devices, and industrial systems.
Practical Voltage and Safety Checks
The tester identifies nominal AC and DC voltage levels from 12 V up to 1000 Vac/Vdc, with DC detection extending to 1400 Vdc. A bright bargraph gives an immediate visual indication, while polarity LEDs help distinguish positive and negative DC connections. When hazardous voltage is present above 50 Vac or 120 Vdc, the red ELV indicator flashes and an audible warning sounds. This warning remains available even when batteries are weak or absent, an important safeguard during voltage absence testing.
Before and after use, the integrated AUTO TEST function checks the condition of the leads, probe tips, electronics, and batteries. This routine helps users confirm that the tester is ready for use. The CA 771 starts automatically on contact, avoiding unnecessary setup steps, and a white work light beneath the red probe improves visibility in cabinets, junction boxes, and poorly lit areas.
More Than a Basic Voltage Detector
Beyond voltage indication, the CA 771 supports continuity assessment when no voltage is detected. Its LED pattern and buzzer communicate resistance ranges, helping users quickly evaluate conductor continuity. Single-pole phase detection can assist in identifying a live phase on earth-referenced networks, while the phase rotation feature confirms L1-L2-L3 or L1-L3-L2 sequence on three-phase circuits.
The load-switching function adds further value. By pressing both 30 mA controls, users can help distinguish interference voltage from operating voltage below 400 V. On compatible installations, this function can also test 30 mA residual-current devices. Because this process produces heat, the tester includes operating limits and requires a cooling interval when needed.
Built for Field Work
With IP65 protection, a 2 m drop rating, a one-meter lead, and an operating range from -30 to +60 C, the CA 771 is made for everyday site conditions. It uses two AA/LR6 batteries and delivers approximately 5,000 ten-second checks. The standard CA 771 includes 2 mm probes, while the CA 771 IP2X version supplies protected 4 mm IP2X probes for enhanced contact safety.
Notes
- Perform the self-test before and after testing.
- Keep fingers behind the probe guards.
- Phase detection does not replace voltage absence verification.
- Use only within the stated voltage category and environmental limits.
Search for 67,706 Manuals online
Type-in Brand or Model