Manual.ly Logo

Chauvin Arnoux CA 755 Manual

0.0 · 0 Ratings

PDF manual · 60 Pages

English

M: QW-35-FL
page

/ 60

Loading...
e159048658939d6ee13e4b7abe30e79e4656 page e
14
WARNING, risk of DANGER! The operator must
refer to these instructions whenever this danger
symbol appears.
Equipment protected by double insulation.
Battery. Earth.
Important information.
The product is declared recyclable following
an analysis of the life cycle in accordance with
standard ISO14040.
Chauvin Arnoux has adopted an Eco-Design
approach in order to design this appliance.
Analysis of the complete lifecycle has enabled us
to control and optimize the effects of the product
on the environment. In particular this appliance
exceeds regulation requirements with respect to
recycling and reuse.
The CE marking indicates conformity with
European directives, in particular LVD and EMC.
The rubbish bin with a line through it indicates
that, in the European Union, the product must
undergo selective disposal in compliance with
Directive WEEE 2002/96/EC. This equipment
must not be treated as household waste.
ENGLISH
Thank you for purchasing this C.A 755 digital tester.
For best results from your instrument:
read these operating instructions carefully,
comply with the precautions for use.
Denition of measurement categories:
Measurement category IV corresponds to measurements
taken at the source of low-voltage installations.
Example: power feeders, counters and protection devices.
Measurement category III corresponds to measurements
on building installations.
Example: distribution panel, circuit-breakers, machines or
xed industrial devices
Measurement category II corresponds to measurements tak-
en on circuits directly connected to low-voltage installations.
Example: power supply to electro-domestic devices and
portable tools.

Chat with your Chauvin Arnoux CA 755 manual using AI

Get instant AI answers from your Chauvin Arnoux CA 755 manual

Ask anything about the Chauvin Arnoux CA 755. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend CA 755?

Yes No

Frequently Asked Questions

A

The Chauvin Arnoux CA 755 is rated for a maximum of 1000 V DC and 600 V AC in Category III measurement environments. It complies with safety standards IEC 61010-1 and IEC 61010-2-030.

Is this answer helpful?

A

Before measuring, turn the switch to any position to check the display and beep. Then short the probes together in resistance mode to verify continuity. Finally, measure a known voltage source to ensure accuracy.

Is this answer helpful?

A

No, you should only use the leads supplied with the device. Using leads with lower voltage ratings or categories will reduce the overall safety rating of the instrument combination.

Is this answer helpful?

A

Powered by two AAA alkaline batteries, the CA 755 offers an autonomy of approximately 100 hours under normal operating conditions. An automatic standby activates after 10 minutes of inactivity to save power.

Is this answer helpful?

A

Yes, the NCV function detects alternating voltage around 230 VAC at distances less than 5 cm. It provides four levels of indication via sound and backlight flashing based on proximity to the live conductor.

Is this answer helpful?

A

Yes, the device has an IP54 protection rating, allowing it to be used outdoors provided there is no rain. It operates within temperatures ranging from -10°C to 55°C.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Measures AC/DC voltage, resistance, capacitance, and continuity with high precision
  • Includes Non-Contact Voltage (NCV) detection for safe live wire identification
  • Rated for 600 V CAT III ensuring safety in building and industrial installations
  • Automatic scan mode simplifies operation by selecting functions dynamically
  • Durable construction with IP54 protection and drop resistance up to 2 meters
VS

Disadvantages

  • High capacity ranges like 3 mF and 30 mF require manual mode selection
  • Does not support verification of voltage absence without a separate VAT tool
  • Battery compartment requires a screwdriver for access
  • Resolution limits apply at lower voltage ranges below 1 V
  • Automatic AC/DC detection only works above 450 mV threshold
M: QW-35-FL

Product Specification

Measurement range

max. 1000V, max. 30MΩ

Package contents

Test leads

M: QW-35-FL

Product Description

Chauvin Arnoux CA 755 Multimeter - Read, Download & Print Free

The Chauvin Arnoux CA 755 is a robust digital tester designed for professionals who demand precision and safety in their electrical measurements. This versatile instrument allows users to measure alternating and direct voltages, resistance, capacitance, and continuity with high accuracy. Whether you are working on building installations or industrial machinery, the CA 755 provides the reliability needed for critical tasks.

Designed with user safety as a priority, this device features double insulation and meets strict international safety standards such as IEC 61010-2-030. It is rated for up to 600 V in Category III environments, making it ideal for distribution panels and fixed industrial equipment. The intuitive interface includes a backlit LCD display that automatically detects AC or DC voltage, ensuring clear readings even in low-light conditions. Additionally, the Non-Contact Voltage (NCV) function allows for quick detection of live conductors without physical contact, adding an extra layer of safety during troubleshooting.

The CA 755 also excels in versatility with its automatic scanning mode, which selects the appropriate measurement function - resistance, continuity, diode test, or capacitance - based on the input signal. For more control, users can manually force specific functions using the Select key. The device is powered by two standard AAA batteries, offering a battery life of approximately 100 hours, and includes an automatic standby feature that activates after ten minutes of inactivity to conserve power.

Delivered in a compact package, the tester comes with essential accessories including red and black test probes, a carrying bag, and a certificate of verification. Its ergonomic design features a protective guard to keep fingers safely behind the device during operation and a rear compartment for storing probes when not in use. With dimensions of 180 x 52 x 45 mm and a weight of roughly 200 grams, it is portable enough for field work yet sturdy enough for daily professional use.

Important Notes

  • Always verify the absence of voltage using a dedicated Voltage Absence Tester (VAT), not the NCV function alone.
  • Do not use the device in explosive atmospheres or on networks exceeding its rated voltage categories.
  • Ensure all insulation on leads and the housing is intact before each use to prevent electric shock hazards.
M: QW-35-FL

© Copyright 2026 Manual.ly