Manual.ly Logo

Char-Broil Gas2Coal Special Edition 3 Manual

0.0 · 0 Ratings

PDF manual · 172 Pages

English

M: QW-35-FL
page

/ 172

Loading...
c8cec8d5521d8b418b1fc88eef7aa920ab8d page 7
Storing Your Appliance
General Appliance Cleaning
Høyre
skinne
•Clean appliance often, preferably after each cookout. If a
bristle brush is used to clean any of the appliance cooking
surfaces, ensure no loose bristles remain on cooking surfaces
prior to barbecueing. It is not recommended to clean cooking
surface while appliance is hot. Appliance should be cleaned
at least once a year.
•Do not mistake brown or black accumulation of grease and
smoke for paint. Interiors of gas barbecues are not painted at
the factory (and should never be painted). Apply a strong
solution of detergent and water or use a appliance cleaner
with scrub brush on insides of appliance lid and bottom.
Rinse and allow to completely air dry. Do not apply caustic
appliance/oven cleaner to painted surfaces.
• Plastic parts: Wash with warm soapy water and wipe dry.
• Do not use citrisol, abrasive cleaners, degreasers or a
concentrated appliance cleaner on plastic parts. Damage to
and failure of parts can result.
•Porcelain surfaces: Because of glass-like composition, most
residue can be wiped away with baking soda/water solution or
specially formulated cleaner. Use nonabrasive scouring
powder for stubborn stains.
•Painted surfaces: Wash with mild detergent or nonabrasive
cleaner and warm soapy water. Wipe dry with a soft
nonabrasive cloth.
•Stainless steel surfaces: To maintain your appliance’s high
quality appearance, wash with mild detergent and warm
soapy water and wipe dry with a soft cloth after each use.
Baked-on grease deposits may require the use of an abrasive
plastic cleaning pad. Use only in direction of brushed finish to
avoid damage. Do not use abrasive pad on areas with
graphics.
• Cooking surfaces: If a bristle brush is used to clean any of the
appliance cooking surfaces, ensure no loose bristles remain
on cooking surfaces prior to barbecueing. It is not
recommended to clean cooking surfaces while appliance is
hot.
•Clean cooking grates.
•Store in dry location.
•When gas cylinder is connected to appliance, store outdoors
in a well-ventilated space and out of reach of children.
•Cover appliance if stored outdoors.
•Store appliance indoors ONLY if gas cylinder is turned off and
disconnected, removed from appliance and stored outdoors.
•When removing appliance from storage check for burner
obstructions.
Cleaning the Burner Assembly
VERY IMPORTANT: Burner tubes must reengage
valve openings. See illustrations at right.
Correct burner-to-
valve engagement
Pry off electrode with a
flate blade screwdriver
Electrode
Electrode
Remove
screws
Carryover tube
Firebox
Firebox Burner Support
Follow these instructions to clean and/or replace parts of burner
assembly or if you have trouble igniting barbecue.
1. Turn gas off at control knobs and LP cylinder.
2. Remove cooking grates and heat tents.
3. Remove carryover tubes and hardware securing burners.
4. Detach electrode from burner.
NOTE: Removal/Detachment method will depend on the burner
configuration. See different configurations in illustrations below.
5. Carefully lift each burner up and away from valve openings.
We suggest three ways to clean the burner tubes. Use the
one easiest for you.
A. Bend a stiff wire (a light weight coat hanger works well)
into a small hook. Run the hook through each burner tube
several times.
B. Use a narrow bottle brush with a flexible handle (do not
use a brass wire brush). Run the brush through each
burner tube several times.
C. Wear eye protection: Use an air hose to force air into
the burner tube and out the burner ports. Check each port
to make sure air comes out each hole.
6. Wire brush entire outer surface of burner to remove food
residue and dirt.
7. Clean any blocked ports with a stiff wire such as an open
paper clip.
8. Check burner for damage due to normal wear and corrosion,
some holes may become enlarged. If any large cracks or
holes are found, replace burner.
9. Attach electrode to burner.
10. Carefully replace burners.
11. Attach burners to brackets on firebox.
12. Reposition carryover tubes and attach to burners. Replace
heat tents and cooking grates.
13. Before cooking again on barbecue, perform a “Leak Test”
and “Burner Flame Check”.
Firebox
Carryover tube
Firebox Burner Support
7

Chat with your Char-Broil Gas2Coal Special Edition 3 manual using AI

Get instant AI answers from your Char-Broil Gas2Coal Special Edition 3 manual

Ask anything about the Char-Broil Gas2Coal Special Edition 3. Answers come from this manual, with the pages they are based on.

Gas2Coal Special Edition 3 Maintenance Schedule

Remind me when maintenance is due
Yearly
Perform leak test on valves and regulator

Leak test before first use, at least once a year, and every time the cylinder is changed or disconnected. Use soapy solution on connections.

Yearly
Deep clean the appliance interior

Apply strong detergent solution or appliance cleaner with scrub brush on insides of lid and bottom. Rinse and air dry. Do not paint interiors.

After each use
Empty the grease cup

The grease cup must be inserted into the appliance and emptied after each use. Do not remove until the appliance has completely cooled.

Before each use
Inspect gas hoses for damage

Check to see if hoses are cut or worn. Make sure hose is not kinked and does not touch warm surfaces. Replace damaged hoses before using.

Regularly
Clean the barbecue

Clean the appliance often, preferably after each cookout. Regular cleaning prevents grease fires which can damage the product.

Regularly
Check burner flames

Check burner flames regularly to ensure proper operation and safety.

After charcoal use
Clean charcoal tray and ashes

Ensure coals are extinguished and unit cooled. Remove charcoal tray and clean out all ashes. Tray discoloration is normal.

After storage/extended idle
Clean burner and venturi assembly

Remove and clean burner and venturi tubes whenever the barbecue has been idle for an extended period to prevent spider webs and flashback.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Gas2Coal Special Edition 3?

Yes No

Frequently Asked Questions

A

No, never use this appliance indoors due to carbon monoxide hazards. Always operate in a well ventilated open outdoor area. Using it inside homes, vehicles, or tents poses severe health risks and potential fatality.

Is this answer helpful?

A

Place charcoal tray, load coal, ignite gas burners on HIGH for fifteen minutes with lid closed. Then turn controls OFF. Open lid and wait five minutes until charcoal turns white before adding food.

Is this answer helpful?

A

Remove tubes, use wire hook or air hose to clear ports, brush exterior, reattach securely. Clean monthly to remove spider webs that obstruct gas flow and cause flashback issues.

Is this answer helpful?

A

Place cylinders under side shelf or behind grill. Maximum diameter is 345 mm and height 430 mm including regulator if placed inside designated area.

Is this answer helpful?

A

Apply soapy water mixture to hose connections. Growing bubbles indicate a leak. Turn gas off at cylinder immediately and do not attempt repair. Call for replacement parts.

Is this answer helpful?

A

Check battery installation, electrode cleanliness, or wire connection. Use alcohol wipe on electrode tip. If electronics continue failing, use match lighting procedure as backup.

Is this answer helpful?

A

No, covering grates blocks burner ventilation and creates dangerous conditions. This can result in property damage and personal injury due to improper airflow and heat distribution.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Dual fuel capability allows gas speed and charcoal flavor
  • Sear burner provides intense heat for perfect steak sears
  • High total heat output reaches 13.62 kW for fast cooking
  • Electronic ignition system simplifies lighting process
  • Stainless steel construction supports durability over years
VS

Disadvantages

  • Must be stored outdoors if connected to gas cylinder
  • Requires frequent burner cleaning to prevent gas blockage
  • Charcoal tray removal necessary for pure gas cooking mode
  • Strict clearance distances limit usable patio space size
  • Plastic parts cannot withstand abrasive cleaners without damage
M: QW-35-FL

Product Specification

Type

Grill cart, combo grill, charcoal grill

Power

10.1 kW

Number of burners

4

Burners

3x Infrared burners (Stainless Steel), 1x Side burner (Sear Burner)

Grill Accessories

Cooking grate (Cast iron, removable, non-stick coated), warming rack, grill lid with thermometer

Grilling area

25.28x17.13 in (WxD), 432.92 sq in (Area)

Gas consumption

2.18 lbs/h

Shelves

1x side shelf, under cabinet for propane tanks

Features

Casters, bottle opener, ignition system

Dimensions

52.91x47.52x24.61 in (WxHxD)

M: QW-35-FL

Product Description

Master Your Backyard Cooking Setup Today

Welcome to the world of versatile barbecuing where flexibility meets power and flavor. The Char-Broil Gas2Coal Special Edition 3 Hybrid Combination Grill Manual guides users through setting up this dual fuel powerhouse effectively. This specific grill combines the quick heating of advanced gas technology with the rich smoky flavor of real charcoal. It features three main stainless steel burners alongside a dedicated Searzall burner designed for intense high heat searing capabilities. Homeowners can cook efficiently on gas for weekdays or switch to coals for traditional smoking methods during weekend gatherings.

Critical Safety Guidelines To Follow Rigorously

Usage demands strict adherence to all safety protocols outlined in the official documentation provided with the unit. Always operate outdoors in a well ventilated open area only. Never use inside garages, tents, or enclosed spaces due to extreme carbon monoxide poisoning risks involved. Maintain at least one meter clearance from any wall and three meters from other ignition sources like hot water heaters. Check hoses for cuts before connecting the tank regulator securely. Regulators must be certified for your specific gas type regulations in your country. Propane and butane are both compatible options depending on regional availability and local supply chains.

Detailed Maintenance And Cleaning Protocols Needed

Regular upkeep prevents dangerous grease fires and significantly extends the overall useful lifespan of the heavy duty unit. Empty the grease cup after every single session to avoid uncontrolled flare ups occurring unexpectedly. Clean burners monthly to remove spider webs or debris that block gas flow entirely within the tubes. Scrub porcelain grates with mild soap only when they are completely cool to touch safely. When using charcoal, remove the tray fully once cooled down completely to prevent ash accumulation. Ash left behind inside the firebox can cause rapid corrosion over time if ignored. Wire brushes help maintain clean grills but always watch for loose bristles falling onto food surfaces. Use alcohol wipes on electrodes if sparking fails to ignite gas properly.

Troubleshooting And Final Thoughts On Overall Performance

This equipment offers significant value for serious cooks looking for maximum versatility in their backyard kitchen space. Proper storage covers protect the metal frame against harsh weather elements when not in active use daily. Disconnect cylinders safely before moving the entire cart to another location within the yard. Follow lighting procedures carefully to avoid dangerous gas buildup inside the lid chamber. If ignition fails wait five full minutes before retrying the starting process. With these comprehensive tips, you ensure consistent heat distribution and personal safety throughout every long cook. Enjoy your culinary creations knowing you prepared the grill correctly according to manufacturer standards and instructions.

M: QW-35-FL

© Copyright 2026 Manual.ly