Manual.ly Logo

Carbest Power Panel Flex - 12V Manual

0

PDF manual · 2 Pages

English

page

/ 2

Download
Search
Loading...
1254-carbest-power-panel-flex-manual page 2
SAFETY
An incorrect completion during the installation or initial operation can
lead to damages and as a result of this can endanger persons. For your
own safety and for the protection of the solar module please consider the
following tips:
-
The valid regulations and safety instructions for the installation and main-
tenance of electrical systems and equipment have to be kept in mind.
- Due to the series connection of the modules, voltage levels may exceed
the protective extra-low voltage.
- Event at lower lightning almost the full open-circuit voltage can be
expected in the modules.
- While working at the modules, they must be covered or disconnected
from the consumer load.
INSTALLATION
To achieve the highest possible energy output we recommend the following
for all PV constructions:
- Alignment of the front module should face due south.
- Tilt angle between 30° and 60°
- For a good self-cleaning effect due to precipitation the tilt angle should
have at least 20°.
- Avoid – even partly – shadowing effects. These can lead to significant
losses in yield.
- The bundling or concentration of the solar radiation, for example by
using lenses or mirrors is not permitted.
-
Avoid folding of the module while unpacking and doing further mounting.
-
Do not raise the modules at the cable.
-
Mount the modules only at appropriated substructures. These must ensure
that no mechanical voltages of the substructure will be transferred.
- Choose the right mounting position so that rain/water can drain wit-
hout hindrance and no puddles can form on and around the solar panel.
- Apply the adhesive to the back of the module over the entire surface
and glue the module on the roof. Important: Please avoid all kind
of air bubbles between the roof and the solar panel. (Manufacturer‘s
recommendation:
Dekasyl MS-5 or Sikaflex 554 with Primer).
Then seal up all sides up to the top edge of the panel.
- Hold a minimum distance of 2 mm between the module and the subs-
tructure, to balance the material expansions. Use only suitable adhesive
or corrosion free screws.
- Make sure the polarity is correct when connecting the modules.
Reverse polarity can lead to destruction of the protective diodes.
- Thereby please note the appropriate valid regulations.
- The modules have to be installed such – particularly along the cable
that water flow towards the cable gland is prevented.
- For any maintenance and repair work produce a plan documenting the
module installation layout, including serial number allocation and
cable layout.
Congratulations to the purchase of a CARBEST solar module.
When treated properly, you will have several decades of enjoyment with
your CARBEST solar modules.
Please note the following instructions for the installation and operation
of the solar modules. A non-compliance results to the cancellation of the
guarantee and warranty.
CARE AND MAINTENANCE
As time goes by the light transmission of the module front side and the power of
the solar cells will be reduced by dirt. At strong dirt a cleaning of the front-mounted
foil surface is recommended. To avoid the damage of the top, use plenty of water
and a soft brush. Do not use strong cleaning agents and metallic objects! Occasi-
onally inspect the cables for damage, corrosion and make sure they are securely
tight.
WARRANTY
The warranty period is 36 months. Reimo reserves the right to rectify eventual de-
faults. The guarantee is excluded for all damages caused by faulty use or improper
handling.
Liability limitations :
In no case Reimo will be reliable for collateral-, secondary- or indirect damages,
costs, expenditure, missed benefits or missed earnings. The indicated sales price of
the product is representing the equivalent value of Reimo’s liability limitations.
REIMO REISEMOBIL-CENTER GMBH · BOSCHRING 10 · D-63329 EGELSBACH · GERMANY · MADE IN CHINA
www.reimo.com
Installation and operating instruction
for Power Panel Flex Modules

Advantages and Disadvantages

Advantages

  • High energy output with proper installation
  • Durable with decades of potential use
  • 36-month warranty provided
VS

Disadvantages

  • Complex installation process
  • Requires regular maintenance
  • Warranty void if improperly installed or handled

Ask a Question

Manual.ly information here
0/1000

Do you recommend Power Panel Flex?

Frequently Asked Question

A

The ideal tilt angle for installing the Carbest Power Panel Flex - 12V is between 30° and 60°. A minimum angle of 20° is recommended for self-cleaning due to rain.

Is this answer helpful?

A

Clean the front surface with plenty of water and a soft brush. Do not use strong cleaning agents or metal objects to avoid damaging the module.

Is this answer helpful?

A

Avoid even partial shading as it can significantly reduce the energy output. Ensure the installation site is free from potential shading objects.

Is this answer helpful?

A

The recommended adhesives are Dekasyl MS-5 and Sikaflex 554 with Primer. Apply the adhesive evenly to avoid air bubbles.

Is this answer helpful?

A

The warranty period for the Carbest Power Panel Flex - 12V is 36 months. Reimo reserves the right to rectify any defects but does not cover damages from improper use.

Is this answer helpful?

A

Yes, but ensure you follow all safety and installation guidelines provided. Incorrect installation can void the warranty and potentially damage the module.

Is this answer helpful?

A

Follow the installation guidelines, regularly clean the module, and inspect the cables for damage and corrosion. Proper maintenance will help in retaining the module's performance.

Is this answer helpful?

Product Description

Product pic

Carbest Power Panel Flex - 12V Manual

Introduction

Welcome to the world of clean energy with the Carbest Power Panel Flex - 12V. This solar module is designed to provide you with decades of reliable power when treated properly. Installing and operating this module correctly is crucial to ensure its longevity and maintain the manufacturer's warranty.

Safety First

Safety is paramount when dealing with electrical installations. Ensure you follow all applicable regulations and safety guidelines. The series connection of modules can generate high voltages, even under low lighting conditions. Always cover the modules or disconnect them from the load before performing any work.

Installation Guidelines

To maximize energy output, align the module front facing south and maintain a tilt angle between 30° and 60°. A minimum tilt of 20° is recommended for self-cleaning due to rain. Avoid shading the panels as even partial shadows can significantly reduce efficiency. Do not fold the module or lift it by the cables during installation. Use proper substructures to avoid mechanical stress on the panel and ensure water can drain freely to prevent puddling.

Adhesives like Dekasyl MS-5 or Sikaflex 554 with Primer are recommended for attaching the module to the roof. Apply the adhesive evenly and avoid air bubbles. Maintain a minimum spacing of 2 mm between the module and substructure to accommodate material expansion. Make sure to connect the modules with the correct polarity to avoid damaging the protective diodes.

Maintenance and Care

Over time, dirt can reduce the light transmission and efficiency of the solar cells. Clean the front surface with plenty of water and a soft brush. Avoid strong cleaning agents and metal objects to prevent scratches. Regularly inspect the cables for damage, corrosion, and ensure they are securely connected.

Warranty and Liability

The Carbest Power Panel Flex - 12V comes with a 36-month warranty. Reimo reserves the right to rectify any defects but will not cover damages caused by improper use. The warranty does not cover collateral, secondary, or indirect damages, nor missed benefits or earnings.

For more information, visit Reimo's website.

Notes

  • Always follow the installation and safety guidelines to ensure maximum efficiency and longevity of your solar module.
  • Regular maintenance will help in retaining the module's performance over the years.

\nNo reviews available to analyze.

Search for 1. Mio Manuals online

Search Subtract

Type-in Brand or Model

© Copyright 2024 Manual.ly